Displaying 20 results from an estimated 315 matches for "15,17".
Did you mean:
150,17
2004 Aug 12
5
Question about TE405P
Hi all,
Does somebody know how I have to setup my TE405P ?
Is it correct my configuration below ? Otherwise, can somebody help me ?
Thanks,
Angel.
zaptel.conf
span=1,1,0,ccs,hdb3
span=2,0,1,ccs,hdb3
span=3,0,1,ccs,hdb3
span=4,0,1,ccs,hdb3
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
bchan=1-15
dchan=16
bchan=17-31
zapata.conf
[channels]
context=default
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
usecallerid=yes
hid...
2009 Sep 28
1
TE121P Blue Alarm/Recovering
Hi All,
I have a TE121P card installed and since connected it to the PRI I keep
getting the Current Alarm as continually changing from Blue
Alarm/Recovering and Recovering.
The config I have is:
/etc/dahdi/system.conf
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
loadzone = cn
defaultzone = cn
/etc/asterisk/chan_dahdi.cfg
[channels]
Context=telco
language=cn
switchtype=euroisdn
signalling=pri_cpe
rxwink=300
usecallerid=yes
.
.
echocancel=yes
group=1
channel=>1-15,17-31
I...
2010 Jun 16
2
DAHDI PRI error message
Hello-
After configuring DAHDI and starting asterisk, I get the following
message continuously on the Asterisk console:
WARNING[2057]: chan_dahdi.c:4158 pri_find_dchan: No D-channels
available! Using Primary channel 16 as D-channel anyway!
My card is a D410P configured for E1, only the first span is configured,
and configuration snippets are as follows:
From /etc/dahdi/system.conf: (auto configured, first span only shown:)
# Span 1: TE4/0/1...
2009 Jun 18
2
dahdi and overlapdial problem
...el=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
internationalprefix=00
nationalprefix=0
overlapdial=no
;Sangoma A101 port 1 [slot:5 bus:3 span:1] <wanpipe1>
switchtype=euroisdn
echocancel=yes
signalling=pri_cpe
channel =>1-15,17-31
/etc/dahdi/system.conf:
# Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3/CCS/CRC4
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
echocanceller=mg2,1-15,17-31
hardhdlc=16
# Global data
loadzone = de
defaultzone = de
Any hints?
Thanks!
Regards,
Bjoern
2003 Jul 11
7
ISDN PRI E1 configuration with E100P
...: Call specified, but not found?<BR>WARNING[213006]: File chan_zap.c, Line 5786 (pri_dchannel): Hangup on bad channel 2</P>
<P>does anybody hav an idea on this?</P>
<P>our zaptel.conf is,</P>
<P>#E100p card<BR>span=1,0,0,ccs,hdb3,crc4<BR>bchan=1-15,17-31<BR>dchan=16</P>
<P>zapata.conf,</P>
<P>;E100p card<BR>switchtype=EuroISDN<BR>signalling=pri_cpe<BR>pridialplan=unknown<BR>context=incoming<BR>group = 2<BR>channel => 1-15,17-31</P>
<P>Thanks inadvance,</P>...
2007 Aug 16
2
Incoming and Outgoing zaptel configuration : ISDN30e
...rds
Rory
zapata.conf
=================================================================
;autogenerated by /usr/local/sbin/config-zaptel do not hand edit
;Zaptel Channels Configurations (zapata.conf)
;
;For detailed zapata options, view /etc/asterisk/zapata.conf.orig
;Modified by Veselin Wed Aug 15 21:13:58 BST 2007
; original saved in zapata.conf.ww
[trunkgroups]
[channels]
language=en
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=no
echocan...
2007 Aug 24
2
TE210P digim card PRI problem
...OS 5 but thing is that i have connect 1 E1 port with avaya E1 back 2 back and second E1 card on Direct Telcom for outgoing for outside now i got this error when i call on avaya PRI
asterisk think PRI_CPE and remote end also CPE
i have configure /etc/zaptel.conf
span=1,1,0,ccs,hdb3
bchan=1-15,17-32
dchan=16
span=1,1,0,ccs,hdb3
bchan=32-46,49-62
dchan=47
in /etc/asterisk/zapata.conf
switchtype=qsig
context=zap-in
signalling=pri_cpe
group=1
channel => 1-15,17-31
group=2
channel => 32-46,49-62
is this configuration is fine or any other proble...
2006 Feb 28
2
run with incorrect E1/T1 jumper settings
...be possible to run it without changing
the jumper settings with a configuration like below or will it be
impossible
to use the card at all before I fix the jumper? I can't try it myself yet
since the operator isn't ready yet, but I would like to know in advance
if it is impossible.
bchan=1-15,17-24
dchan=16
instead of
bchan=1-15,17-31
dchan=16
best regards
Robert
2006 Jan 05
3
TE110p and pri_cpe signalling not recognized
...ng must
be specified before any channels are.
Jan 5 21:43:33 WARNING[6808]: loader.c:414 __load_resource:
chan_zap.so: load_module failed, returning -1
My config is here below.
TIA
Arnar Gestsson
/etc/zaptel.conf
span=1,1,0,ccs,hdb3,crc4
loadzone = nl
loadzone=de
defaultzone=nl
bchan=1-5,7-15,17-31
dchan=16
/etc/asterisk/zapata.conf
[trunkgroups]
trunkgroup => 1,16
spanmap => 1,1
[channels]
language=en
context=default
switchtype=euroisdn
pridialplan=unknown
signalling=pri_cpe
;rxwink=300
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes...
2007 Jul 26
10
Query
Hi,
I am facing problem in configuring D-channel. I did the following
configuration for TE-120P card
/etc/zaptel.conf
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
/etc/asterisk/zaptel.conf
group=1
signalling=pri_cpe
switchtype=euroisdn
context=incoming
channel=1-15,17-31
DIGIUM card is connected through cable to another end.On placing call
from other end to asterisk PBX ( through DIGIUM card ) the following
error mess...
2009 Aug 24
1
E1 w/ TE420B EC
...cable, though I have hands on location that have
done this a couple times already. Please help. I'm quite frustrated
at this point. Thank you in advance for any help.
/etc/dahdi/system.conf
# Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
# Global data
loadzone = nl
defaultzone = nl
/etc/asterisk/chan_dahdi.conf
[trunkgroups]
[channels]
; Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
group=1
context=frompstn
switchtype = euroisdn
signalling = pri_cpe
channe...
2005 Jun 14
2
ERROR[5539]: chan_zap.c:9750 setup_zap: Unable to load config zapata.conf
...10: Individual Clear channel (Default) (Slaves: 10)
Channel 11: Individual Clear channel (Default) (Slaves: 11)
Channel 12: Individual Clear channel (Default) (Slaves: 12)
Channel 13: Individual Clear channel (Default) (Slaves: 13)
Channel 14: Individual Clear channel (Default) (Slaves: 14)
Channel 15: Individual Clear channel (Default) (Slaves: 15)
Channel 16: D-channel (Default) (Slaves: 16)
Channel 17: Individual Clear channel (Default) (Slaves: 17)
Channel 18: Individual Clear channel (Default) (Slaves: 18)
Channel 19: Individual Clear channel (Default) (Slaves: 19)
Channel 20: Individual Cl...
2011 Feb 18
1
Asterisk with TE 121 DADHI incoming calls fail
...nected to the hipath4000 are working. If you want to dial from an up0
device to the e1 interface where asterisk is connected to, you have to
use the prefix 83. But when you enter the 3rd cipher this error appears
at the cli
CODE:SELECT ALL
<http://forums.digium.com/viewtopic.php?f=1&t=77155&sid=3679c2a13cbbf9aa2e75d02a2f00c8b3#>
|[Feb 16 11:29:07] ERROR[2555]: chan_dahdi.c:13691 dahdi_pri_error:
1 !! Not yet handling pre-handle message type SEGMENT (0x60)
[Feb 16 11:29:07] ERROR[2555]: chan_dahdi.c:13691 dahdi_pri_error: 1
!! Don't know how to pre-handle me...
2010 Apr 30
1
HDLC Receiver overrun on Wildcard TE410P
...3/0: Provisioned, In Alarm, Down, Active
(span 3 is not connected to gateway for now)
and I can't make any calls.
My dahdi-channels.conf:
; Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
group=0,11
context=from-pstn
switchtype = euroisdn
signalling = pri_net
channel => 1-15,17-31
context = default
group = 63
/etc/dahdi/system.conf:
# Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER)
span=1,0,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31
/proc/interrupts:
CPU0 CPU1 CPU2 CPU3
0:...
2004 Sep 03
5
Digium E100P and PMX in Germany
...i need some help on my zaptel configuration. My E100P only shows some
YELLOW / RED alarm when I load the wct1xxp module and do a
cat /proc/zaptel/1
Span 1: WCT1/0 "Digium Wildcard E100P E1/PRA Card 0" HDB3/CCS YELLOW RED
...
..
.
My /etc/zaptel.conf is:
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
loadzone=nl
defaultzone=nl
I tried zaptel-1.0RC2 and the latest CVS version too. So I think it is a
configuration problem. Can anyone give me a hint how to configure my
E100P?
Thank you for your help,
Jan Goericke
2003 Oct 09
2
E100P setup in Switzerland
...eems to use Siemens hardware.
Here are my configs (cvs from a few hours ago) :
zaptel.conf
loadzone=fr ; tried "de" but got warning at modprobe
defaultzone=fr
span=1,1,0,cas,hdb3,crc4,yellow ; Seems to be right, as the Siemens
SDSL-G703 modem switches its LEDs off ... not sure
bchan=1-15,17-31
dchan=16
zapata.conf
...
switchtype = euroisdn
signalling = pri_cpe
group = 1
channel => 1-15,17-31
When I try to dial-out, I get :
NOTICE[33809]: File app_dial.c, Line 502 (dial_exec): Unable to create
channel of type 'Zap'
== Everyone is busy at this time
-- Executin...
2004 May 15
1
asterisk with E1
Hi,
I use asterisk with a Digium E1 (wct1xxp). On my old server,
everything went fine, but after having built the card to a new one, I
only have problems:
-- Executing Dial("IAX2[guest@217.X.X.X:18308]/1", "Zap/1/853")
in new stack
May 15 14:10:37 NOTICE[15376]: app_dial.c:554 dial_exec: Unable
to create channel of type 'Zap'
== Everyone is busy at this time
ztcfg shows no errors.
So where's my problem?!?
Regards,
thomas
PS:
zapata.conf:
[...]
switchtype = euroisdn
signalling = pri_cpe
group = 1
channel => 1-1...
2005 Jun 15
1
[Help] ZT_CHANCONFIG failed on channel 25
Hi,
I a new user of asterisk, I'm trying to in install zaptel drivers on my
ISDN card Digium Tiger 3xx TE110P.
And my configuration is
#
# Zaptel Configuration File
#
span=1,1,0,ccs,hdb3
bchan=1-15,17-31
dchan=16
loadzone = it
;
;
; Zapata Configuration file
;
[channels]
immediate=no
switchtype=EuroISDN
signalling=pri_cpe
pridialplan=unknown
context=incoming
usecallerid=yes
group=1
channel => 1-15,17-31
when I lunch the zaptel sevice I got this problem.
Loading zaptel framework:...
2004 Dec 02
4
TE110P + Asterisk
...Registered channel 10, PRI Signalling signalling
-- Registered channel 11, PRI Signalling signalling
-- Registered channel 12, PRI Signalling signalling
-- Registered channel 13, PRI Signalling signalling
-- Registered channel 14, PRI Signalling signalling
-- Registered channel 15, PRI Signalling signalling
-- Registered channel 17, PRI Signalling signalling
-- Registered channel 18, PRI Signalling signalling
-- Registered channel 19, PRI Signalling signalling
-- Registered channel 20, PRI Signalling signalling
-- Registered channel 21, PRI Signalling sig...
2007 Sep 05
4
ztcfg error : TE110p error with " CAS signalling on span 1 conflicts with HDLC with ...
Dear All,
I'm integrating avaya commuication manager difinity ver 1.0 with asterisk
using B2B E1. following are the details of my H/W, zaptel configs and
software installed.
Digium TE110p
asterisk 1.2.19
cent OS 4.4
zaptel 1.2.18
libpri 1.2.4
etc/zaptel.conf
span=1,0,0,cas,hdb3
bchan=1-15,17-31
dchan=16
when i ztcfg -vvv im having this error message and the E1 is not getting up.
"cas signalling on span1 conflicts with HDLC with FCS on channel 16"
The switchtype and signalling im using is national, pri_cpe
I'm attaching the avaya config details for more information....