search for: 100w

Hi everyone, Any chance I can get the card[1] in $subj to work under CentOS 5.1 ? The only thing I get in dmesg when inserting/removing the card, are messages from pccard: --- dmesg --- pccard: CardBus card inserted into slot 0 pccard: card ejected from slot 0 --- end --- When inserting, no new network interface becomes available, so I assume it doesn't recognize it. Any way I can get it to

Thank you for the help. Unfortunately Eaton's website is a nightmare to get concrete data, software, or anything else out of. The reputation for the quality of their components and the compatibility for NUT alone is what white-listed the UPS as a selection option. The source code is enlightening; they're actually controlled/fed back via a bi-directional serial over USB terminal? I

...does have a notable voltage delta. Are there any other tests I can perform or ways that I can help gather data to get the longer tests supported? I borrowed a 60W light bulb (instead of one of the new weird ones that stores are now selling to drive people to just try an LED light). For the 1100W/2200 VA 5E model a 60W light registers as a ups.load of ~2 (clearly truncated; I guess this correlates to approximately floor((100 * 60)/2200)) It took me a while to remember that I needed to configure upsd.users and use a completely different command ( upscmd instead of upsc ) to interact with th...

> On Oct 31, 2016, at 10:15 PM, Michael Evans <mjevans1983 at gmail.com> wrote: > > Are there any other tests I can perform or ways that I can help gather data to get the longer tests supported? > The "test.battery.start" command takes a parameter in seconds (defaults to 600): https://github.com/networkupstools/nut/blob/v2.7.4/drivers/nutdrv_qx_blazer-common.c#L286

It seems that the UPS I bought is actually served by the blazer_usb driver. USB ids 06da:0003 (lsusb DB thinks it's a "Phoenixtec Power Co., Ltd 1300VA UPS", but this has apparantly been re-used by Eaton 5E2200USB-LA) It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS SKU: 147140 Mfr Part #: 5E2200USB-LA UPC: 743172064875 http://www.microcenter.com/product/470131/5E_1,100W_2,200VA_6-Outlet_UPS "The Eaton 5E is an essential line interactive UPS that provides cost effective and reliable power protection against power outages and bad po...

...te: > > It seems that the UPS I bought is actually served by the blazer_usb driver. > > USB ids 06da:0003 (lsusb DB thinks it's a "Phoenixtec Power Co., Ltd 1300VA UPS", but this has apparantly been re-used by Eaton 5E2200USB-LA) > > It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS > > SKU: 147140 Mfr Part #: 5E2200USB-LA UPC: 743172064875 > > http://www.microcenter.com/product/470131/5E_1,100W_2,200VA_6-Outlet_UPS Thanks, this info is useful. > "The Eaton 5E is an essential line interactive UPS that provides cost effective and re...

...http://www.g8jvm.com ###################################################################### Ham Call: G8JVM . QRV: 50-432 MHz + Microwave Maidenhead QRA: IO82SP38, LAT. 52 39.720' N LONG. 2 28.171 W QRV 6mtrs 200W, 4mtrs 150W, 2mtrs 300W, 70cms 200W, Microwave 1296MHz 110W, 2320MHz 100W, 5760MHz 10W & 10368MHz 5W OS: Linux Mint 19.2 x86_64 Tina, on a Dell Inspiron 3580 laptop ###################################################################### Come back Guy Fawkes, all is forgiven

...file ="Arvin12Map.png", maptype ="mobile") PlotOnStaticMap(MyMap,lat =datas$LAT,lon =datas$LON, ? ? ? ? ? ? ? ? axes =TRUE,mar =rep(4,4)) When I run this on my computer the horizontal axis ranges from 300W to 60E, but the ticks in between aren't linearly spaced (300W, 200W, 100W, 0, 100E, 160W, 60W). Also, the vertical axis moves linearly from 300S to 300N. It seems that no matter what data I supply for datas, the axes are always labeled this way. My question is: 1. Does this problem occur on other machines using this code? 2. Does anyone have an explanation for it? and 3....

...failed about a month ago; all of a sudden it > reported a battery failure. Since the Belkin logs showed this as in > instant transition from 99% to 22%, I assume a circuit board failure, > not a battery failure. Similarly, one Belkin UPS 500 circuit board > failed after I used my 100W amateur radio transmitter (not connected to > the UPS), and another Belkin UPS 500 I gave my father has shown > problems, Yes, my experience with Belkin has been that their hardware and software is crap. It barely works and easily breaks. > so I decided to replace them with multiple...

I recently purchased a UPS from http://www.microcenter.com/product/470131/5E_1,100W_2,200VA_6-Outlet_UPS It's sold as an Eaton 5E 1,100W 2,200VA 6-Outlet UPS SKU: 147140 Mfr Part #: 5E2200USB-LA UPC: 743172064875 "The Eaton 5E is an essential line interactive UPS that provides cost effective and reliable power protection against power outages and bad power quality. Tha...

...a full charge/discharge test? Should I >disable >SHUTDOWNCMD in upsmon.conf? Or is there any other way to ignore forced >shutdown? I'd like to see how long it would go until the batteries >actually drain. > Disconnect the computer from the UPS, connect a dummy load (like 2-3 * 100W tungsten light bulbs) , turn off the nut client on the computer. Start a stopwatch. Unplug the UPS from mains and wait for it to die. Read the value on the stopwatch. wolfy

...st? Should I >> disable >> SHUTDOWNCMD in upsmon.conf? Or is there any other way to ignore forced >> shutdown? I'd like to see how long it would go until the batteries >> actually drain. >> > Disconnect the computer from the UPS, connect a dummy load (like 2-3 * 100W tungsten light bulbs) , turn off the nut client on the computer. Start a stopwatch. Unplug the UPS from mains and wait for it to die. Read the value on the stopwatch. > > wolfy > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at alioth-l...

A client of mine has an APC Back-UPS 350 model (USB connected). His office had a power incident yesterday, where there was an interruption of about 30 seconds. During that time, the server shut down. As soon as it went on battery, the daemon initiated a shutdown. In checking it today, I see the ups.delay.shutdown setting is -1. I tried to adjust it, but could not do so. What does the

OK. I'll try it, but it really puzzles me how the battery could have gone bad for just 15 months. The online power is pretty stable, so the battery hasn't gone through many charge/discharge cycles... Regards, -- Georgi On 11.1.2020 at 14:24, Manuel Wolfshant wrote: > > indicates that the UPS thought that battery was close to depleted and decided to shutdown. I suggest to fully

In the subdivision where I live, we have a well that time to time has problems. Currently, our trustees call me, I take a message, and then call the people on our "phone calling tree" and give them the message. They, in turn, pass the message on to the rest of the residents. We have a few problems with the way this works -- people don't bother to relay the message, or,

Hello, Somewhat off-topic, but seeking some input from other tech folk on this list. I have a Tripp-Lite SMART 2200 (a white tower that looks similar to, but predates the black SMART2200NET) that just failed its monthly battery test so I bought new batteries and replaced the old ones. Sadly once put back together, plugged in and enabled it did not power up--no lights, sounds, smoke, etc. I took

I do a bunch of "kindness of strangers" hosting in my basement and my three kVA apc unit died recently. In looking around, it looked like Belkin was a reasonable low-end replacement for a few machines. Then I read this mailing list after I purchased one and was gifted another. It looks like people don't like Belkin. ;-) So the question is what's a good UPS for running

Well FWbuilder is NOT easy. The documentation does not match the current GUI. Now the box is locked up. I will have to pull it again, hook it up to a kybd/VGA and reset iptables.... Maybe Shoreline with webmin.... Problem is I want a REAL router/firewall with little work. Both public and private nets have routable addresses. No NATing for me! I just help write the RFC ;) And all the