search for: 100ma

> Hello everyone. I try to connect four PowerMust 2000 ups's via usb to one > computer using megatec_usb driver. But megatec_usb completly ignores port > directive in ups.conf, I even try port = /dev/null and megatec_usb founds > ups and it works. The 'port' is not used for USB connected devices, it's only needed for compatibility reasons. > Problem is that

...Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 3 (error) bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass...

...-------------- T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0f03 ProdID=0001 Rev= 0.01 S: Manufacturer=Ver 1.0 S: Product=USB To RS232 Interface (V1.0) BaudRate 2400bps C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usbhid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms ----------------------- Bus 001 Device 002: ID 0f03:0001 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass...

Here is what I get: # usbconfig -u 1 -a 3 dump_curr_config_desc ugen1.3: <Tripp Lite TRIPP LITE UPS> at usbus1, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA) Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0022 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x00a0 bMaxPower = 0x0032 Interface 0 bLength = 0x0009...

...susb: Bus 005 Device 003: ID 0001:0000 Fry's Electronics * usb-devices: T: Bus=05 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0001 ProdID=0000 Rev=01.00 S: Product=MEC0003 C: #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 2 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) * Test using nutdrv_qx -DDDDD in nutdrv_qx.log (attached). * Test using blazer_usb -DDDDD in blazer_usb.log (attached). * Capture of successful communications with the UPS using the application downloaded from the vendor's...

...tail below. Another info : This driver "blazer_usb" and this UPS have no problem on a raspberry pi3. With the same configuration!! What I can do?? Thanks in advance DL usbconfig dump_devices_des ugen0.4: <MEC MEC0003> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x0001 idProduct = 0x0000 bcdDevice = 0x0100 iManufacturer = 0x0...

...0?0665 idProduct 0?5161 bcdDevice 0.02 iManufacturer 1 Cypress Semiconductor iProduct 2 USB to Serial iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 3 bmAttributes 0?80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 4 Sample HID ** UNRECOGNIZED: 09 21 00 01 00 01 22 1b 00 Endpoint Descriptor: bLeng...

...I have left a message with the Dev for NAS4Free to give up the ./configure for NUT portion.? I am hoping they will... usbconfig -u 0 -a 5 dump_device_desc? datanas: ~# usbconfig -u 0 -a 5 dump_device_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType = 0x0001 ? bcdUSB = 0x0110 ? bDeviceClass = 0x0000? <Probed by interface class> ? bDeviceSubClass = 0x0000 ? bDeviceProtocol = 0x0000 ? bMaxPacketSize0 = 0x0008 ? idVendor = 0x09ae ? idProduct = 0x3016 ? bcdDevice = 0x0002 ? iManufacturer = 0x0003? <ret...

...1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 41 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 4 Sample HID bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfa...

...1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 41 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 4 Sample HID bmAttributes 0x80 (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfa...

...ctor Speed: 1,5 Mb/s (low) USB Version: 1.10 Device Class: 00(ifc ) Device Subclass: 00 Device Protocol: 00 Maximum Default Endpoint Size: 8 Number of Configurations: 1 Vendor Id: 0665 Product Id: 5161 Revision Number:0.02 Config Number: 1 Number of Interfaces: 1 Attributes: 80 MaxPower Needed: 100mA Interface Number: 0 Name: hid Alternate Number: 0 Class: 03(HID ) Sub Class: 0 Protocol: 0 Number of Endpoints: 1 Endpoint Adderss: 81 Direction: in Attribute: 3 Type: Int. Max Packet Size: 8 Interval: 32ms If someone could help me, it'll be really nice, as I...

...ctor Speed: 1,5 Mb/s (low) USB Version: 1.10 Device Class: 00(ifc ) Device Subclass: 00 Device Protocol: 00 Maximum Default Endpoint Size: 8 Number of Configurations: 1 Vendor Id: 0665 Product Id: 5161 Revision Number:0.02 Config Number: 1 Number of Interfaces: 1 Attributes: 80 MaxPower Needed: 100mA Interface Number: 0 Name: hid Alternate Number: 0 Class: 03(HID ) Sub Class: 0 Protocol: 0 Number of Endpoints: 1 Endpoint Adderss: 81 Direction: in Attribute: 3 Type: Int. Max Packet Size: 8 Interval: 32ms If someone could help me, it'll be really nice, as I...

Hello, i try to setup NUT service to read/control my UPS but without success. Problem is when i try to start "/usr/local/ups/bin/upsdrvctl -DDDD -u root start" i got: /Network UPS Tools - UPS driver controller 2.6.2/ / 0.000000/ /If you're not a NUT core developer, chances are that you're told to enable debugging/ /to see why a driver

...nfiguration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 34 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0x80 > MaxPower 100mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 3 Human Interface Devices > bInterfaceS...

...urations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Devices bInterfaceSubClass 0 No Subclass bInterf...

...I have left a message with the Dev for NAS4Free to give up the ./configure for NUT portion.? I am hoping they will... usbconfig -u 0 -a 5 dump_device_desc? datanas: ~# usbconfig -u 0 -a 5 dump_device_desc ugen0.5: <TRIPP LITE UPS Tripp Lite> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA)? bLength = 0x0012 ? bDescriptorType = 0x0001 ? bcdUSB = 0x0110 ? bDeviceClass = 0x0000? <Probed by interface class> ? bDeviceSubClass = 0x0000 ? bDeviceProtocol = 0x0000 ? bMaxPacketSize0 = 0x0008 ? idVendor = 0x09ae ? idProduct = 0x3016 ? bcdDevice = 0x0002 ? iManufacturer = 0x0003? <ret...

...n Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xa0 (Bus Powered) Remote Wakeup MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Devices bInterfaceSubClass 0 No Subclass...

...evices content: ==== cut ==== T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=ffff ProdID=0000 Rev= 1.00 S: Manufacturer=UIS Ablerex S: Product=Ablerex USB Interface 049e C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I: If#= 0 Alt= 0 #EPs= 0 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) ==== cut ==== "newhidups -DD -u root -x generic -x vendorid=ffff auto" gave me this: debug level is '2' Checking device (FFFF/0000) (001/002) - VendorID: ffff - ProductID: 0000 - Manufacturer: UIS Ablerex - Pro...

On Aug 19, 2018, at 3:03 PM, Valentin Merkulov <schnobel at ickis.net> wrote: > > Here is what I get: > > # usbconfig -u 1 -a 3 dump_curr_config_desc > ugen1.3: <Tripp Lite TRIPP LITE UPS> at usbus1, cfg=0 md=HOST spd=LOW > (1.5Mbps) pwr=ON (100mA) > [...] Hmm, that may be an issue on the NUT side, then. (You might see issues if you run those commands repeatedly, though.) We are working on another branch that uses the newer libusb-1.0 APIs. I haven't had to modify a ports tree package in a while, but it should be possible to substi...

...n Descriptor:     bLength                 9     bDescriptorType         2     wTotalLength           34     bNumInterfaces          1     bConfigurationValue     1     iConfiguration          0     bmAttributes         0xa0       (Bus Powered)       Remote Wakeup     MaxPower              100mA     Interface Descriptor:       bLength                 9       bDescriptorType         4       bInterfaceNumber        0       bAlternateSetting       0       bNumEndpoints           1       bInterfaceClass         3 Human Interface Device       bInterfaceSubClass      0 No Subclass      ...