thr3ads.net - samba - [Samba] Upgrading from Debian Stretch to Buster, Van Belle package [Dec 2019]

If this information is useful, please help other people find it:
Share via:

Lmloge

2019-Dec-04 09:48 UTC

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

Hello,

I am preparing for upgrading from Debian Stretch to Buster.
I am using Louis Van Belle's Samba packages.

My current Samba version is:
# smbstatus --version
Version 4.7.7-Debian

I can see that the Samba version that will be installed, when I upgrade 
from Stretch to Buster, will be the 4.11 since this is the current 
stable release...

I would like to know if there are major changes between those two versions.
(This is because in the past, I had to face the passage from Samba3 to 
Samba4 without having been prepared to it and my system was broken down 
for several weeks before I could set up, thanks to Rowland Penny, a 
proper system.)

Is it this line that I will have to put in 
"/etc/apt/sources.list.d/van-belle.list":
deb http://apt.van-belle.nl/debian buster-samba411 main contrib non-free
 ????????????????????????????????? /\/\/\/\/\/\/\/\
Thank you for your help.
Best regards,
--
L?a

L.P.H. van Belle

2019-Dec-04 11:49 UTC

head link

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

Hai L?a,

If you on debian stretch now, i suggest you do the following. 

First upgrade samba on debian stretch, upto 4.10.10. 
> Is it this line that I will have to put in 
> "/etc/apt/sources.list.d/van-belle.list":
> deb http://apt.van-belle.nl/debian buster-samba411 main 
> contrib non-free
Yes, but as said, i suggest, use small steps in the upgrade. 

stretch-samba48
stretch-samba49
stretch-samba410
Then when your at 4.10 you can safe upgrade to buster to 
buster-samba410
buster-samba411

When upgrading use : apt-get dist-upgrade --autoremove
Which is needed to replace and remove optional samba packages.
In the step from 4.10 to 4.11 the upgrade might stop.
Then use: apt --fix-broken install 
That should remove libldb1 and upgrade contineus with installing libldb2. 

So far,


Greetz, 

Louis


> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> Lmloge via samba
> Verzonden: woensdag 4 december 2019 10:49
> Aan: samba at lists.samba.org
> Onderwerp: [Samba] Upgrading from Debian Stretch to Buster, 
> Van Belle package
> 
> Hello,
> 
> I am preparing for upgrading from Debian Stretch to Buster.
> I am using Louis Van Belle's Samba packages.
> 
> My current Samba version is:
> # smbstatus --version
> Version 4.7.7-Debian
> 
> I can see that the Samba version that will be installed, when 
> I upgrade 
> from Stretch to Buster, will be the 4.11 since this is the current 
> stable release...
> 
> I would like to know if there are major changes between those 
> two versions.
> (This is because in the past, I had to face the passage from 
> Samba3 to 
> Samba4 without having been prepared to it and my system was 
> broken down 
> for several weeks before I could set up, thanks to Rowland Penny, a 
> proper system.)
> 
> Is it this line that I will have to put in 
> "/etc/apt/sources.list.d/van-belle.list":
> deb http://apt.van-belle.nl/debian buster-samba411 main 
> contrib non-free
>  ????????????????????????????????? /\/\/\/\/\/\/\/\
> Thank you for your help.
> Best regards,
> --
> L?a
> 
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
> 
>

Lmloge

2019-Dec-19 18:15 UTC

head link

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

Hello Louis,

Sorry for my late answer.
I couldn't work on that earlier.

So I did steps:
stretch-samba48
stretch-samba49
stretch-samba410
Then when your at 4.10 you can safe upgrade to buster to
buster-samba410

At last step, apt-get dist-upgrade, bind9 failed:
---------------------------------------------------------------------------------------------------------------
Installing new version of config file /etc/network/if-down.d/bind9 ...
Installing new version of config file /etc/network/if-up.d/bind9 ...
Installing new version of config file /etc/ppp/ip-down.d/bind9 ...
Installing new version of config file /etc/ppp/ip-up.d/bind9 ...
bind9-pkcs11.service is a disabled or a static unit not running, not starting
it.
bind9-resolvconf.service is a disabled or a static unit not running, not
starting it.
Job for bind9.service failed because the control process exited with error code.
See "systemctl status bind9.service" and "journalctl -xe"
for details.
invoke-rc.d: initscript bind9, action "restart" failed.
? bind9.service - BIND Domain Name Server
    Loaded: loaded (/lib/systemd/system/bind9.service; enabled; vendor preset:
enabled)
    Active: failed (Result: exit-code) since Thu 2019-12-19 18:58:04 CET; 7ms
ago
      Docs: man:named(8)
   Process: 4847 ExecStart=/usr/sbin/named $OPTIONS (code=exited,
status=1/FAILURE)
   Process: 4840 ExecStop=/usr/sbin/rndc stop (code=exited, status=0/SUCCESS)
  Main PID: 4795 (code=exited, status=0/SUCCESS)

Dec 19 18:58:04 leonora named[4848]: listening on IPv4 interface enp2s0,
192.168.3.4#53
Dec 19 18:58:04 leonora named[4848]: generating session key for dynamic DNS
Dec 19 18:58:04 leonora named[4848]: sizing zone task pool based on 5 zones
Dec 19 18:58:04 leonora named[4848]: Loading 'AD DNS Zone' using driver
dlopen
Dec 19 18:58:04 leonora named[4848]: dlz_dlopen failed to open library
'/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so' -
/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so: cannot open shared object
file: No such file or directory
Dec 19 18:58:04 leonora named[4848]: dlz_dlopen of 'AD DNS Zone' failed
Dec 19 18:58:04 leonora systemd[1]: bind9.service: Control process exited,
code=exited status=1
Dec 19 18:58:04 leonora systemd[1]: Failed to start BIND Domain Name Server.
Dec 19 18:58:04 leonora systemd[1]: bind9.service: Unit entered failed state.
Dec 19 18:58:04 leonora systemd[1]: bind9.service: Failed with result
'exit-code'.
dpkg: error processing package bind9 (--configure):
  installed bind9 package post-installation script subprocess returned error
exit status 1

[...]

Errors were encountered while processing:
  bind9
E: Sub-process /usr/bin/dpkg returned an error code (1)
W: Operation was interrupted before it could finish
---------------------------------------------------------------------------------------------------------------

Can you help?
Best regards,
--
L?a

==============================================================================================================Hai
L?a,

If you on debian stretch now, i suggest you do the following.

First upgrade samba on debian stretch, upto 4.10.10.
>/Is it this line that I will have to put in
/>/"/etc/apt/sources.list.d/van-belle.list": />/deb
http://apt.van-belle.nl/debian buster-samba411 main />/contrib non-free /Yes, but as said, i suggest, use small steps in the upgrade.

stretch-samba48
stretch-samba49
stretch-samba410
Then when your at 4.10 you can safe upgrade to buster to
buster-samba410
buster-samba411

When upgrading use : apt-get dist-upgrade --autoremove
Which is needed to replace and remove optional samba packages.
In the step from 4.10 to 4.11 the upgrade might stop.
Then use: apt --fix-broken install
That should remove libldb1 and upgrade contineus with installing libldb2.

So far,

Greetz,

Louis

==============================================================================================================
On 04/12/2019 10:48 AM, Lmloge wrote:> Hello,
>
> I am preparing for upgrading from Debian Stretch to Buster.
> I am using Louis Van Belle's Samba packages.
>
> My current Samba version is:
> # smbstatus --version
> Version 4.7.7-Debian
>
> I can see that the Samba version that will be installed, when I 
> upgrade from Stretch to Buster, will be the 4.11 since this is the 
> current stable release...
>
> I would like to know if there are major changes between those two 
> versions.
> (This is because in the past, I had to face the passage from Samba3 to 
> Samba4 without having been prepared to it and my system was broken 
> down for several weeks before I could set up, thanks to Rowland Penny, 
> a proper system.)
>
> Is it this line that I will have to put in 
> "/etc/apt/sources.list.d/van-belle.list":
> deb http://apt.van-belle.nl/debian buster-samba411 main contrib non-free
> ????????????????????????????????? /\/\/\/\/\/\/\/\
> Thank you for your help.
> Best regards,
> -- 
> L?a
>

Rowland penny

2019-Dec-19 18:38 UTC

head link

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

On 19/12/2019 18:15, Lmloge via samba wrote:> Hello Louis,
>
> Sorry for my late answer.
> I couldn't work on that earlier.
>
> So I did steps:
> stretch-samba48
> stretch-samba49
> stretch-samba410
> Then when your at 4.10 you can safe upgrade to buster to
> buster-samba410
>
> At last step, apt-get dist-upgrade, bind9 failed:
>
---------------------------------------------------------------------------------------------------------------
>
> Installing new version of config file /etc/network/if-down.d/bind9 ...
> Installing new version of config file /etc/network/if-up.d/bind9 ...
> Installing new version of config file /etc/ppp/ip-down.d/bind9 ...
> Installing new version of config file /etc/ppp/ip-up.d/bind9 ...
> bind9-pkcs11.service is a disabled or a static unit not running, not 
> starting it.
> bind9-resolvconf.service is a disabled or a static unit not running, 
> not starting it.
> Job for bind9.service failed because the control process exited with 
> error code.
> See "systemctl status bind9.service" and "journalctl
-xe" for details.
> invoke-rc.d: initscript bind9, action "restart" failed.
> ? bind9.service - BIND Domain Name Server
> ?? Loaded: loaded (/lib/systemd/system/bind9.service; enabled; vendor 
> preset: enabled)
> ?? Active: failed (Result: exit-code) since Thu 2019-12-19 18:58:04 
> CET; 7ms ago
> ???? Docs: man:named(8)
> ? Process: 4847 ExecStart=/usr/sbin/named $OPTIONS (code=exited, 
> status=1/FAILURE)
> ? Process: 4840 ExecStop=/usr/sbin/rndc stop (code=exited, 
> status=0/SUCCESS)
> ?Main PID: 4795 (code=exited, status=0/SUCCESS)
>
> Dec 19 18:58:04 leonora named[4848]: listening on IPv4 interface 
> enp2s0, 192.168.3.4#53
> Dec 19 18:58:04 leonora named[4848]: generating session key for 
> dynamic DNS
> Dec 19 18:58:04 leonora named[4848]: sizing zone task pool based on 5 
> zones
> Dec 19 18:58:04 leonora named[4848]: Loading 'AD DNS Zone' using 
> driver dlopen
> Dec 19 18:58:04 leonora named[4848]: dlz_dlopen failed to open library 
> '/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so' - 
> /usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so: cannot open 
> shared object file: No such file or directory
Is the samba-libs package installed ?

That is where the missing .so is from.

Rowland

L.P.H. van Belle

2019-Dec-20 07:48 UTC

head link

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

Hai, 

Ok, for me so i know where you now at. 
Looks like your in the middle of the dist-upgrade in buster. 

Rowland is correct, looks like bind is upgrading and samba-libs is not yet
installed.
If samba-libs is installed, lookup this line in you bind config. 

include "/var/lib/samba/bind-dns/named.conf"; 

Open "/var/lib/samba/bind-dns/named.conf" and verify if its set to 
/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_11.so	 <<   11 not 10 .

Other steps are : 

sudo apt-get update --fix-missing 
sudo apt-get install -f
sudo dpkg --configure -a

It looks like you did hit an old bug. 
You can add this : 

systemctl edit bind9
# that opens this file : 
# /etc/systemd/system/bind9.service.d/override.conf
# Add : 
[Service]
ExecReload
# To prevent bind from crashing on reload with bind9_dlz.so enabled.

If all above is not working, 
Then disable this line : include "/var/lib/samba/bind-dns/named.conf";
And repeat the apt-get steps from above. 


Greetz, 

Louis

> -----Oorspronkelijk bericht-----
> Van: samba [mailto:samba-bounces at lists.samba.org] Namens 
> Lmloge via samba
> Verzonden: donderdag 19 december 2019 19:15
> Aan: samba at lists.samba.org
> Onderwerp: Re: [Samba] Upgrading from Debian Stretch to 
> Buster, Van Belle package
> 
> Hello Louis,
> 
> Sorry for my late answer.
> I couldn't work on that earlier.
> 
> So I did steps:
> stretch-samba48
> stretch-samba49
> stretch-samba410
> Then when your at 4.10 you can safe upgrade to buster to
> buster-samba410
> 
> At last step, apt-get dist-upgrade, bind9 failed:
> --------------------------------------------------------------
> -------------------------------------------------
> Installing new version of config file /etc/network/if-down.d/bind9 ...
> Installing new version of config file /etc/network/if-up.d/bind9 ...
> Installing new version of config file /etc/ppp/ip-down.d/bind9 ...
> Installing new version of config file /etc/ppp/ip-up.d/bind9 ...
> bind9-pkcs11.service is a disabled or a static unit not 
> running, not starting it.
> bind9-resolvconf.service is a disabled or a static unit not 
> running, not starting it.
> Job for bind9.service failed because the control process 
> exited with error code.
> See "systemctl status bind9.service" and "journalctl
-xe" for details.
> invoke-rc.d: initscript bind9, action "restart" failed.
> ??? bind9.service - BIND Domain Name Server
>     Loaded: loaded (/lib/systemd/system/bind9.service; 
> enabled; vendor preset: enabled)
>     Active: failed (Result: exit-code) since Thu 2019-12-19 
> 18:58:04 CET; 7ms ago
>       Docs: man:named(8)
>    Process: 4847 ExecStart=/usr/sbin/named $OPTIONS 
> (code=exited, status=1/FAILURE)
>    Process: 4840 ExecStop=/usr/sbin/rndc stop (code=exited, 
> status=0/SUCCESS)
>   Main PID: 4795 (code=exited, status=0/SUCCESS)
> 
> Dec 19 18:58:04 leonora named[4848]: listening on IPv4 
> interface enp2s0, 192.168.3.4#53
> Dec 19 18:58:04 leonora named[4848]: generating session key 
> for dynamic DNS
> Dec 19 18:58:04 leonora named[4848]: sizing zone task pool 
> based on 5 zones
> Dec 19 18:58:04 leonora named[4848]: Loading 'AD DNS Zone' 
> using driver dlopen
> Dec 19 18:58:04 leonora named[4848]: dlz_dlopen failed to 
> open library 
> '/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so' - 
> /usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so: cannot 
> open shared object file: No such file or directory
> Dec 19 18:58:04 leonora named[4848]: dlz_dlopen of 'AD DNS 
> Zone' failed
> Dec 19 18:58:04 leonora systemd[1]: bind9.service: Control 
> process exited, code=exited status=1
> Dec 19 18:58:04 leonora systemd[1]: Failed to start BIND 
> Domain Name Server.
> Dec 19 18:58:04 leonora systemd[1]: bind9.service: Unit 
> entered failed state.
> Dec 19 18:58:04 leonora systemd[1]: bind9.service: Failed 
> with result 'exit-code'.
> dpkg: error processing package bind9 (--configure):
>   installed bind9 package post-installation script subprocess 
> returned error exit status 1
> 
> [...]
> 
> Errors were encountered while processing:
>   bind9
> E: Sub-process /usr/bin/dpkg returned an error code (1)
> W: Operation was interrupted before it could finish
> --------------------------------------------------------------
> -------------------------------------------------
> 
> Can you help?
> Best regards,
> --
> L?a
> 
> 
> =============================================================>
================================================> Hai L?a,
> 
> If you on debian stretch now, i suggest you do the following.
> 
> First upgrade samba on debian stretch, upto 4.10.10.
> 
> >/Is it this line that I will have to put in 
> />/"/etc/apt/sources.list.d/van-belle.list": />/deb 
> http://apt.van-belle.nl/debian buster-samba411 main 
> />/contrib non-free /
> Yes, but as said, i suggest, use small steps in the upgrade.
> 
> stretch-samba48
> stretch-samba49
> stretch-samba410
> Then when your at 4.10 you can safe upgrade to buster to
> buster-samba410
> buster-samba411
> 
> When upgrading use : apt-get dist-upgrade --autoremove
> Which is needed to replace and remove optional samba packages.
> In the step from 4.10 to 4.11 the upgrade might stop.
> Then use: apt --fix-broken install
> That should remove libldb1 and upgrade contineus with 
> installing libldb2.
> 
> So far,
> 
> 
> Greetz,
> 
> Louis
> 
> 
> =============================================================>
================================================>
> On 04/12/2019 10:48 AM, Lmloge wrote:
> > Hello,
> >
> > I am preparing for upgrading from Debian Stretch to Buster.
> > I am using Louis Van Belle's Samba packages.
> >
> > My current Samba version is:
> > # smbstatus --version
> > Version 4.7.7-Debian
> >
> > I can see that the Samba version that will be installed, when I 
> > upgrade from Stretch to Buster, will be the 4.11 since this is the 
> > current stable release...
> >
> > I would like to know if there are major changes between those two 
> > versions.
> > (This is because in the past, I had to face the passage 
> from Samba3 to 
> > Samba4 without having been prepared to it and my system was broken 
> > down for several weeks before I could set up, thanks to 
> Rowland Penny, 
> > a proper system.)
> >
> > Is it this line that I will have to put in 
> > "/etc/apt/sources.list.d/van-belle.list":
> > deb http://apt.van-belle.nl/debian buster-samba411 main 
> contrib non-free
> > ????????????????????????????????? /\/\/\/\/\/\/\/\
> > Thank you for your help.
> > Best regards,
> > -- 
> > L?a
> >
> 
> -- 
> To unsubscribe from this list go to the following URL and read the
> instructions:  https://lists.samba.org/mailman/options/samba
> 
>

Lmloge

2019-Dec-20 10:09 UTC

head link

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

Hello,

 > Looks like your in the middle of the dist-upgrade in buster.

Yes indeed.

 > looks like bind is upgrading and samba-libs is not yet installed.

Indeed, I think it is not:
# dpkg -L samba-libs
dpkg-query: package 'samba-libs' is not installed

Also the following directories no longer exist:
- /usr/lib/x86_64-linux-gnu/samba/
- /var/lib/samba/bind-dns/

 > apt-get update --fix-missing
OK

 > apt-get install -f
--------------
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Setting up bind9 (1:9.11.5.P4+dfsg-5.1) ...
bind9-pkcs11.service is a disabled or a static unit not running, not 
starting it.
bind9-resolvconf.service is a disabled or a static unit not running, not 
starting it.
Job for bind9.service failed because the control process exited with 
error code.
See "systemctl status bind9.service" and "journalctl -xe"
for details.
invoke-rc.d: initscript bind9, action "restart" failed.
??? bind9.service - BIND Domain Name Server
 ?? Loaded: loaded (/lib/systemd/system/bind9.service; enabled; vendor 
preset: enabled)
 ?? Active: failed (Result: exit-code) since Fri 2019-12-20 10:36:41 
CET; 9ms ago
 ???? Docs: man:named(8)
 ? Process: 3313 ExecStart=/usr/sbin/named $OPTIONS (code=exited, 
status=1/FAILURE)

Dec 20 10:36:41 MACHINE named[3314]: Loading 'AD DNS Zone' using driver 
dlopen
Dec 20 10:36:41 MACHINE named[3314]: dlz_dlopen failed to open library 
'/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so' - 
/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so: cannot open 
shared object file: No such file or directory
Dec 20 10:36:41 MACHINE named[3314]: dlz_dlopen of 'AD DNS Zone' failed
Dec 20 10:36:41 MACHINE named[3314]: SDLZ driver failed to load.
Dec 20 10:36:41 MACHINE named[3314]: DLZ driver failed to load.
Dec 20 10:36:41 MACHINE named[3314]: loading configuration: failure
Dec 20 10:36:41 MACHINE named[3314]: exiting (due to fatal error)
Dec 20 10:36:41 MACHINE systemd[1]: bind9.service: Control process 
exited, code=exited, status=1/FAILURE
Dec 20 10:36:41 MACHINE systemd[1]: bind9.service: Failed with result 
'exit-code'.
Dec 20 10:36:41 MACHINE systemd[1]: Failed to start BIND Domain Name Server.
dpkg: error processing package bind9 (--configure):
 ?installed bind9 package post-installation script subprocess returned 
error exit status 1
Errors were encountered while processing:
 ?bind9
E: Sub-process /usr/bin/dpkg returned an error code (1)
--------------

I should stop here, but I also tried the other things you suggested, 
just in case.
> systemctl edit bind9
> # that opens this file : 
> # /etc/systemd/system/bind9.service.d/override.conf
> # Add : 
> [Service]
> ExecReloadI did that.

 > If all above is not working,
 > Then disable this line : include
"/var/lib/samba/bind-dns/named.conf";
 > And repeat the apt-get steps from above.

Is it in the file "/etc/bind/named.conf.local" that I should make that
comment?
What I have in this file is:
include "/var/lib/samba/private/named.conf"
not: include "/var/lib/samba/bind-dns/named.conf"
I commented the line that I have and re-launched the three commands:
apt-get update --fix-missing
apt-get install -f
dpkg --configure -a
They do not fail anymore but when I try to start bind, it fails.
With the same error as before:
dlz_dlopen failed to open library 
'/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so' -
/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so: cannot open 
shared object file: No such file or directory

(By the way, I have no "sudo" command.)

Best regards,
--
L?a



On 20/12/2019 8:48 AM, L.P.H. van Belle wrote:> Hai,
>
> Ok, for me so i know where you now at.
> Looks like your in the middle of the dist-upgrade in buster.
>
> Rowland is correct, looks like bind is upgrading and samba-libs is not yet
installed.
> If samba-libs is installed, lookup this line in you bind config.
>
> include "/var/lib/samba/bind-dns/named.conf";
>
> Open "/var/lib/samba/bind-dns/named.conf" and verify if its set
to
> /usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_11.so	 <<   11 not 10
.
>
> Other steps are :
>
> sudo apt-get update --fix-missing
> sudo apt-get install -f
> sudo dpkg --configure -a
>
> It looks like you did hit an old bug.
> You can add this :
>
> systemctl edit bind9
> # that opens this file :
> # /etc/systemd/system/bind9.service.d/override.conf
> # Add :
> [Service]
> ExecReload>
> # To prevent bind from crashing on reload with bind9_dlz.so enabled.
>
> If all above is not working,
> Then disable this line : include
"/var/lib/samba/bind-dns/named.conf";
> And repeat the apt-get steps from above.
>
>
> Greetz,
>
> Louis
>
>
>> -----Oorspronkelijk bericht-----
>> Van: samba [mailto:samba-bounces at lists.samba.org] Namens
>> Lmloge via samba
>> Verzonden: donderdag 19 december 2019 19:15
>> Aan:samba at lists.samba.org
>> Onderwerp: Re: [Samba] Upgrading from Debian Stretch to
>> Buster, Van Belle package
>>
>> Hello Louis,
>>
>> Sorry for my late answer.
>> I couldn't work on that earlier.
>>
>> So I did steps:
>> stretch-samba48
>> stretch-samba49
>> stretch-samba410
>> Then when your at 4.10 you can safe upgrade to buster to
>> buster-samba410
>>
>> At last step, apt-get dist-upgrade, bind9 failed:
>> --------------------------------------------------------------
>> Installing new version of config file /etc/network/if-down.d/bind9 ...
>> Installing new version of config file /etc/network/if-up.d/bind9 ...
>> Installing new version of config file /etc/ppp/ip-down.d/bind9 ...
>> Installing new version of config file /etc/ppp/ip-up.d/bind9 ...
>> bind9-pkcs11.service is a disabled or a static unit not
>> running, not starting it.
>> bind9-resolvconf.service is a disabled or a static unit not
>> running, not starting it.
>> Job for bind9.service failed because the control process
>> exited with error code.
>> See "systemctl status bind9.service" and "journalctl
-xe" for details.
>> invoke-rc.d: initscript bind9, action "restart" failed.
>> ??? bind9.service - BIND Domain Name Server
>>      Loaded: loaded (/lib/systemd/system/bind9.service;
>> enabled; vendor preset: enabled)
>>      Active: failed (Result: exit-code) since Thu 2019-12-19
>> 18:58:04 CET; 7ms ago
>>        Docs: man:named(8)
>>     Process: 4847 ExecStart=/usr/sbin/named $OPTIONS
>> (code=exited, status=1/FAILURE)
>>     Process: 4840 ExecStop=/usr/sbin/rndc stop (code=exited,
>> status=0/SUCCESS)
>>    Main PID: 4795 (code=exited, status=0/SUCCESS)
>>
>> Dec 19 18:58:04 leonora named[4848]: listening on IPv4
>> interface enp2s0, 192.168.3.4#53
>> Dec 19 18:58:04 leonora named[4848]: generating session key
>> for dynamic DNS
>> Dec 19 18:58:04 leonora named[4848]: sizing zone task pool
>> based on 5 zones
>> Dec 19 18:58:04 leonora named[4848]: Loading 'AD DNS Zone'
>> using driver dlopen
>> Dec 19 18:58:04 leonora named[4848]: dlz_dlopen failed to
>> open library
>> '/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so' -
>> /usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so: cannot
>> open shared object file: No such file or directory
>> Dec 19 18:58:04 leonora named[4848]: dlz_dlopen of 'AD DNS
>> Zone' failed
>> Dec 19 18:58:04 leonora systemd[1]: bind9.service: Control
>> process exited, code=exited status=1
>> Dec 19 18:58:04 leonora systemd[1]: Failed to start BIND
>> Domain Name Server.
>> Dec 19 18:58:04 leonora systemd[1]: bind9.service: Unit
>> entered failed state.
>> Dec 19 18:58:04 leonora systemd[1]: bind9.service: Failed
>> with result 'exit-code'.
>> dpkg: error processing package bind9 (--configure):
>>    installed bind9 package post-installation script subprocess
>> returned error exit status 1
>>
>> [...]
>>
>> Errors were encountered while processing:
>>    bind9
>> E: Sub-process /usr/bin/dpkg returned an error code (1)
>> W: Operation was interrupted before it could finish
>> --------------------------------------------------------------
>> Can you help?
>> Best regards,
>> --
>> L?a
>>
>>
>> =============================================================>>
Hai L?a,
>>
>> If you on debian stretch now, i suggest you do the following.
>>
>> First upgrade samba on debian stretch, upto 4.10.10.
>>
>>> /Is it this line that I will have to put in
>>> />/"/etc/apt/sources.list.d/van-belle.list": />/deb
>>> http://apt.van-belle.nl/debian  buster-samba411 main
>>> />/contrib non-free /
>>> Yes, but as said, i suggest, use small steps in the upgrade.
>>>
>>> stretch-samba48
>>> stretch-samba49
>>> stretch-samba410
>>> Then when your at 4.10 you can safe upgrade to buster to
>>> buster-samba410
>>> buster-samba411
>>>
>>> When upgrading use : apt-get dist-upgrade --autoremove
>>> Which is needed to replace and remove optional samba packages.
>>> In the step from 4.10 to 4.11 the upgrade might stop.
>>> Then use: apt --fix-broken install
>>> That should remove libldb1 and upgrade contineus with
>>> installing libldb2.
>>>
>>> So far,
>>>
>>>
>>> Greetz,
>>>
>>> Louis
>>>
>>>
>>>
=============================================================>>> On
04/12/2019 10:48 AM, Lmloge wrote:
>>> Hello,
>>>
>>> I am preparing for upgrading from Debian Stretch to Buster.
>>> I am using Louis Van Belle's Samba packages.
>>>
>>> My current Samba version is:
>>> # smbstatus --version
>>> Version 4.7.7-Debian
>>>
>>> I can see that the Samba version that will be installed, when I
>>> upgrade from Stretch to Buster, will be the 4.11 since this is the
>>> current stable release...
>>>
>>> I would like to know if there are major changes between those two
>>> versions.
>>> (This is because in the past, I had to face the passage from Samba3
to
>>> Samba4 without having been prepared to it and my system was broken
>>> down for several weeks before I could set up, thanks to Rowland
Penny,
>>> a proper system.)
>>>
>>> Is it this line that I will have to put in
>>> "/etc/apt/sources.list.d/van-belle.list":
>>> debhttp://apt.van-belle.nl/debian  buster-samba411 main contrib
non-free
>>>  ????????????????????????????????? /\/\/\/\/\/\/\/\
>>> Thank you for your help.
>>> Best regards,
>>> -- 
>>> L?a

L.P.H. van Belle

2019-Dec-20 10:27 UTC

head link

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

Ok, thanks for the output's these are very usefull for me. 

Can you try this first. 
 > Is it in the file "/etc/bind/named.conf.local" that I should make
that comment?
> What I have in this file is:
> include "/var/lib/samba/private/named.conf"
> not: include "/var/lib/samba/bind-dns/named.conf"Ok, these patch will change ( this started in samba 4.9.x ) 
Will do that later on, first finish the upgrade and then we make samba running
again.

disable this line in the bind config, if not done. 
//include "/var/lib/samba/private/named.conf"

Ok, so you already did taht, but here i forgot to mention. 
After that change stop bind start bind, it thats ok. 
systemctl stop bind9
systemctl start bind9

Then run again: apt-get install -f 

Can you try that.

Greetz, 

Louis
 
 
 
 


________________________________

	Van: Lmloge [mailto:lmloge at orange.fr] 
	Verzonden: vrijdag 20 december 2019 11:10
	Aan: L.P.H. van Belle; samba at lists.samba.org
	Onderwerp: Re: [Samba] Upgrading from Debian Stretch to Buster, Van Belle
package
	
	

	Hello,
	
	> Looks like your in the middle of the dist-upgrade in buster. 
	
	Yes indeed.
	
	> looks like bind is upgrading and samba-libs is not yet installed.

	Indeed, I think it is not:
	# dpkg -L samba-libs
	dpkg-query: package 'samba-libs' is not installed

	Also the following directories no longer exist:
	- /usr/lib/x86_64-linux-gnu/samba/
	- /var/lib/samba/bind-dns/
	
	> apt-get update --fix-missing 
	OK
	
	> apt-get install -f
	--------------
	Reading package lists... Done
	Building dependency tree       
	Reading state information... Done
	0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
	1 not fully installed or removed.
	After this operation, 0 B of additional disk space will be used.
	Setting up bind9 (1:9.11.5.P4+dfsg-5.1) ...
	bind9-pkcs11.service is a disabled or a static unit not running, not starting
it.
	bind9-resolvconf.service is a disabled or a static unit not running, not
starting it.
	Job for bind9.service failed because the control process exited with error
code.
	See "systemctl status bind9.service" and "journalctl -xe"
for details.
	invoke-rc.d: initscript bind9, action "restart" failed.
	??? bind9.service - BIND Domain Name Server
	   Loaded: loaded (/lib/systemd/system/bind9.service; enabled; vendor preset:
enabled)
	   Active: failed (Result: exit-code) since Fri 2019-12-20 10:36:41 CET; 9ms
ago
	     Docs: man:named(8)
	  Process: 3313 ExecStart=/usr/sbin/named $OPTIONS (code=exited,
status=1/FAILURE)
	
	Dec 20 10:36:41 MACHINE named[3314]: Loading 'AD DNS Zone' using driver
dlopen
	Dec 20 10:36:41 MACHINE named[3314]: dlz_dlopen failed to open library
'/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so' -
/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so: cannot open shared object
file: No such file or directory
	Dec 20 10:36:41 MACHINE named[3314]: dlz_dlopen of 'AD DNS Zone' failed
	Dec 20 10:36:41 MACHINE named[3314]: SDLZ driver failed to load.
	Dec 20 10:36:41 MACHINE named[3314]: DLZ driver failed to load.
	Dec 20 10:36:41 MACHINE named[3314]: loading configuration: failure
	Dec 20 10:36:41 MACHINE named[3314]: exiting (due to fatal error)
	Dec 20 10:36:41 MACHINE systemd[1]: bind9.service: Control process exited,
code=exited, status=1/FAILURE
	Dec 20 10:36:41 MACHINE systemd[1]: bind9.service: Failed with result
'exit-code'.
	Dec 20 10:36:41 MACHINE systemd[1]: Failed to start BIND Domain Name Server.
	dpkg: error processing package bind9 (--configure):
	 installed bind9 package post-installation script subprocess returned error
exit status 1
	Errors were encountered while processing:
	 bind9
	E: Sub-process /usr/bin/dpkg returned an error code (1)
	--------------
	
	I should stop here, but I also tried the other things you suggested, just in
case.
	

	> systemctl edit bind9
	> # that opens this file : 
	> # /etc/systemd/system/bind9.service.d/override.conf
	> # Add : 
	> [Service]
	> ExecReload
	I did that.
	
	> If all above is not working, 
	> Then disable this line : include
"/var/lib/samba/bind-dns/named.conf";
	> And repeat the apt-get steps from above. 
	
	Is it in the file "/etc/bind/named.conf.local" that I should make
that comment?
	What I have in this file is:
	include "/var/lib/samba/private/named.conf"
	not: include "/var/lib/samba/bind-dns/named.conf"
	I commented the line that I have and re-launched the three commands:
	apt-get update --fix-missing 
	apt-get install -f
	dpkg --configure -a
	They do not fail anymore but when I try to start bind, it fails.
	With the same error as before:
	dlz_dlopen failed to open library
'/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so' -
	/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so: cannot open shared
object file: No such file or directory

	(By the way, I have no "sudo" command.)

	Best regards,
	--
	L?a
	

	
	
	
	On 20/12/2019 8:48 AM, L.P.H. van Belle wrote:
	

		Hai, 
		
		Ok, for me so i know where you now at. 
		Looks like your in the middle of the dist-upgrade in buster. 
		
		Rowland is correct, looks like bind is upgrading and samba-libs is not yet
installed.
		If samba-libs is installed, lookup this line in you bind config. 
		
		include "/var/lib/samba/bind-dns/named.conf"; 
		
		Open "/var/lib/samba/bind-dns/named.conf" and verify if its set to 
		/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_11.so    <<   11 not 10
.
		
		Other steps are : 
		
		sudo apt-get update --fix-missing 
		sudo apt-get install -f
		sudo dpkg --configure -a
		
		It looks like you did hit an old bug. 
		You can add this : 
		
		systemctl edit bind9
		# that opens this file : 
		# /etc/systemd/system/bind9.service.d/override.conf
		# Add : 
		[Service]
		ExecReload		
		# To prevent bind from crashing on reload with bind9_dlz.so enabled.
		
		If all above is not working, 
		Then disable this line : include
"/var/lib/samba/bind-dns/named.conf";
		And repeat the apt-get steps from above. 
		
		
		Greetz, 
		
		Louis
		
		
		

			-----Oorspronkelijk bericht-----
			Van: samba [ MailScanner heeft een e-mail met mogelijk een poging tot fraude
gevonden van "lists.samba.org"  mailto:samba-bounces at
lists.samba.org <mailto:samba-bounces at lists.samba.org> ] Namens
			Lmloge via samba
			Verzonden: donderdag 19 december 2019 19:15
			Aan: samba at lists.samba.org
			Onderwerp: Re: [Samba] Upgrading from Debian Stretch to 
			Buster, Van Belle package
			
			Hello Louis,
			
			Sorry for my late answer.
			I couldn't work on that earlier.
			
			So I did steps:
			stretch-samba48
			stretch-samba49
			stretch-samba410
			Then when your at 4.10 you can safe upgrade to buster to
			buster-samba410
			
			At last step, apt-get dist-upgrade, bind9 failed:
			--------------------------------------------------------------
			Installing new version of config file /etc/network/if-down.d/bind9 ...
			Installing new version of config file /etc/network/if-up.d/bind9 ...
			Installing new version of config file /etc/ppp/ip-down.d/bind9 ...
			Installing new version of config file /etc/ppp/ip-up.d/bind9 ...
			bind9-pkcs11.service is a disabled or a static unit not 
			running, not starting it.
			bind9-resolvconf.service is a disabled or a static unit not 
			running, not starting it.
			Job for bind9.service failed because the control process 
			exited with error code.
			See "systemctl status bind9.service" and "journalctl -xe"
for details.
			invoke-rc.d: initscript bind9, action "restart" failed.
			??? bind9.service - BIND Domain Name Server
			    Loaded: loaded (/lib/systemd/system/bind9.service; 
			enabled; vendor preset: enabled)
			    Active: failed (Result: exit-code) since Thu 2019-12-19 
			18:58:04 CET; 7ms ago
			      Docs: man:named(8)
			   Process: 4847 ExecStart=/usr/sbin/named $OPTIONS 
			(code=exited, status=1/FAILURE)
			   Process: 4840 ExecStop=/usr/sbin/rndc stop (code=exited, 
			status=0/SUCCESS)
			  Main PID: 4795 (code=exited, status=0/SUCCESS)
			
			Dec 19 18:58:04 leonora named[4848]: listening on IPv4 
			interface enp2s0, 192.168.3.4#53
			Dec 19 18:58:04 leonora named[4848]: generating session key 
			for dynamic DNS
			Dec 19 18:58:04 leonora named[4848]: sizing zone task pool 
			based on 5 zones
			Dec 19 18:58:04 leonora named[4848]: Loading 'AD DNS Zone' 
			using driver dlopen
			Dec 19 18:58:04 leonora named[4848]: dlz_dlopen failed to 
			open library 
			'/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so' - 
			/usr/lib/x86_64-linux-gnu/samba/bind9/dlz_bind9_10.so: cannot 
			open shared object file: No such file or directory
			Dec 19 18:58:04 leonora named[4848]: dlz_dlopen of 'AD DNS 
			Zone' failed
			Dec 19 18:58:04 leonora systemd[1]: bind9.service: Control 
			process exited, code=exited status=1
			Dec 19 18:58:04 leonora systemd[1]: Failed to start BIND 
			Domain Name Server.
			Dec 19 18:58:04 leonora systemd[1]: bind9.service: Unit 
			entered failed state.
			Dec 19 18:58:04 leonora systemd[1]: bind9.service: Failed 
			with result 'exit-code'.
			dpkg: error processing package bind9 (--configure):
			  installed bind9 package post-installation script subprocess 
			returned error exit status 1
			
			[...]
			
			Errors were encountered while processing:
			  bind9
			E: Sub-process /usr/bin/dpkg returned an error code (1)
			W: Operation was interrupted before it could finish
			--------------------------------------------------------------
			Can you help?
			Best regards,
			--
			L?a
			
			
			=============================================================			Hai L?a,
			
			If you on debian stretch now, i suggest you do the following.
			
			First upgrade samba on debian stretch, upto 4.10.10.
			
			

				/Is it this line that I will have to put in 
				/>/"/etc/apt/sources.list.d/van-belle.list": />/deb 
				http://apt.van-belle.nl/debian buster-samba411 main 
				/>/contrib non-free /
				Yes, but as said, i suggest, use small steps in the upgrade.
				
				stretch-samba48
				stretch-samba49
				stretch-samba410
				Then when your at 4.10 you can safe upgrade to buster to
				buster-samba410
				buster-samba411
				
				When upgrading use : apt-get dist-upgrade --autoremove
				Which is needed to replace and remove optional samba packages.
				In the step from 4.10 to 4.11 the upgrade might stop.
				Then use: apt --fix-broken install
				That should remove libldb1 and upgrade contineus with 
				installing libldb2.
				
				So far,
				
				
				Greetz,
				
				Louis
				
				
				=============================================================				On
04/12/2019 10:48 AM, Lmloge wrote:
				

				Hello,
				
				I am preparing for upgrading from Debian Stretch to Buster.
				I am using Louis Van Belle's Samba packages.
				
				My current Samba version is:
				# smbstatus --version
				Version 4.7.7-Debian
				
				I can see that the Samba version that will be installed, when I 
				upgrade from Stretch to Buster, will be the 4.11 since this is the 
				current stable release...
				
				I would like to know if there are major changes between those two 
				versions.
				(This is because in the past, I had to face the passage from Samba3 to 
				Samba4 without having been prepared to it and my system was broken 
				down for several weeks before I could set up, thanks to Rowland Penny, 
				a proper system.)
				
				Is it this line that I will have to put in 
				"/etc/apt/sources.list.d/van-belle.list":
				deb http://apt.van-belle.nl/debian buster-samba411 main contrib non-free
				                                  /\/\/\/\/\/\/\/\
				Thank you for your help.
				Best regards,
				-- 
				L?a

Stefan G. Weichinger

2020-Jun-19 15:11 UTC

head link

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

Am 19.12.19 um 19:15 schrieb Lmloge via samba:
> When upgrading use : apt-get dist-upgrade --autoremove
> Which is needed to replace and remove optional samba packages.
> In the step from 4.10 to 4.11 the upgrade might stop.
> Then use: apt --fix-broken install
> That should remove libldb1 and upgrade contineus with installing libldb2.
hijacking this older thread now:

Did an upgrade from Debian 9.12 to Buster now ...

libldb2 is not found in any repo, so only get samba-4.9.5 from debian repos:



# apt-cache policy samba
samba:
  Installiert:           2:4.9.5+dfsg-5+deb10u1
  Installationskandidat: 2:4.9.5+dfsg-5+deb10u1
  Versionstabelle:
     2:4.10.15+dfsg-0.1buster1 500
        500 http://apt.van-belle.nl/debian buster-samba410/main amd64
Packages
 *** 2:4.9.5+dfsg-5+deb10u1 990
        990 http://security.debian.org buster/updates/main amd64 Packages
        100 /var/lib/dpkg/status


# apt-cache policy libldb2
N: Paket libldb2 kann nicht gefunden werden.

Tried rm-ing samba, winbind, libldb1 ... some "--autoremove" and
"--distupgrade" ... hmm, hints welcome.

After 4.10 I'd like to go to 4.11.x as well.

Greets, Stefan

Reasonably Related Threads

Search for more possibly parallel threads

samba - Dec 2019 - Upgrading from Debian Stretch to Buster, Van Belle package

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

[Samba] Upgrading from Debian Stretch to Buster, Van Belle package

Reasonably Related Threads