Hi,
I am having some problems getting samba to work with 2 network cards
on the same workgroup. I am using Samba version 3.0.10 the version that
comes with RHEL4. eth0 is set to 192.168.1.2 and is hooked into a
switch on the network and will be used to communicate with other pcs on
the network. eth1 is set to 192.168.2.2 and is hooked directly with a
crossover cable to another pc not on the network just nic to nic. The
other pc isn't on the network because i only want it to communicate
directly to the server off of the second nic eth1. I set the pc running
off eth1 to the workgroup TAC. The server is also setup to run in the
TAC workgroup. The pcs on the network that will be seeing the server
from eth0 192.168.1.2 are also set to the TAC workgroup. I can map
drives with both but it seems to want to default to eth0 connections
only, and my connection through eth1 gets dropped after the pc is
shutdown and turned back on. I guess my question is how do i setup
samba to run and broadcast continually to both network cards eth0 and
eth1. Thank you, Robert