Eric Diven
2007-Oct-30 22:12 UTC
[Samba] Problem with ACLs "Too many ACE entries for file to convert to posix perms."
At the suggestion of Stas, I'm starting a new thread on this one. This pretty much covers where I'm at right now: Doug, thanks, here's a complete listing of the config file, and some logging, hopefully this will be illuminating to somebody.> Neither of these lines set the log level.Yes, I've been setting it in the init script. When I do ps -ef | grep smbd, I see that logging is enabled. I straightened out that problem (the one behind the monitor *sheepish grin*), and the logging works as it's supposed to.> Getting windows acl's is a multi step process.Tell me about it ;-)> You need a file system capable of supporting extended acl's. Ibelieve you previously said you were using UFS file system. I haven't used UFS since 1987. Man Mount on linux doesn't suggest extended acl's are supported. Are they? Both Solaris and CentOS support them. Using fsetacl and fgetacl, I can set acls and see them on files in the FS> Once the file system is capable of supporting extended acl's, you needto mount the filesystem with the appropriate options. By default, considering the age of UFS, I would assume extended acl's aren't supported by default, if they are at all. Sun has been updating it, acl support is on by default. In fact, as near as I can tell, you can't turn it off. I'm under the impression that there are many flavors of UFS, not all of which are compatible.> Once the filesystem is mounted with the right options, then samba hasto have been compiled with the correct options, which you've verified. It sure looks like it ;-)> After all that, samba has top be configured correctly to support acl'sin windows. Samba can be configured to serve files in ms-dos mode, so it's not a given. The smb.conf manpage indicates that nt acl support = yes by default. Making it explicit doesn't seem to change the behavior.> Usually, if someone is asked to show the configuration, put out theentire conf file. There's been a lot of dribs and drabs, but much has been missing. First thing I do is run a copy thru testparm. Most of this thread has been like blind mans bluff. Usually I try to keep it to a minimum, because people frequently don't trim out the stuff when they reply. Result, a *lot* of extraneous crap. As more and more people don't trim, the signal to noise ratio quickly approaches zero. As requested, I've put the whole thing in. I've been using testparm throughout this project, and I've included its output too, since it strips comments and stuff that's included by default.> Just so you know - a lot of people are using acl's in samba.I don't doubt it. How I'd love to join them, and I appreciate everybody's help.> Regards, DougBelow, there's also a dump of the level 10 logging from trying to add an entry to the ACL. This covers adding an element to the ACL, but not the issue of seeing them, I'm guessing the issues may be related. To cut to the chase, the fatal looking line appears to be the one 3 timestamps from the bottom: [2007/10/30 14:16:53, 3] smbd/posix_acls.c:convert_canon_ace_to_posix_perms(2579) convert_canon_ace_to_posix_perms: Too many ACE entries for file foo.txt to convert to posix perms. This looks suspiciously like it's not actually trying to set the security as an ACL. If it were, I'd expect that it wouldn't be trying to squeeze everything into posix perms. ~Eric The complete config file: bash-3.00# cat /usr/local/samba/lib/smb.conf # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options (perhaps too # many!) most of which are not shown in this example # # Any line which starts with a ; (semi-colon) or a # (hash) # is a comment and is ignored. In this example we will use a # # for commentry and a ; for parts of the config file that you # may wish to enable # # NOTE: Whenever you modify this file you should run the command "testparm" # to check that you have not made any basic syntactic errors. # #======================= Global Settings ====================================[global] # workgroup = NT-Domain-Name or Workgroup-Name workgroup = W2K3TEST realm = W2K3TEST.LOCAL preferred master = no server string = croesus running samba security = ADS encrypt passwords = yes winbind separator = + winbind use default domain = no winbind enum users = no winbind enum groups = no idmap uid = 10000-20000 idmap gid = 10000-20000 # if you want to automatically load your printer list rather # than setting them up individually then you'll need this printcap name = /etc/printcap load printers = yes # this tells Samba to use a separate log file for each machine # that connects log file = /var/log/samba/log.%m # Put a capping on the size of the log files (in Kb). max log size = 5000 # Most people will find that this option gives better performance. # See speed.txt and the manual pages for details socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 #============================ Share Definitions ============================= [afiles] nt acl support = yes admin users = W2K3TEST+bobadmin, @W2K3TEST+admins path = /honda/afiles writeable = yes inherit owner = yes inherit permissions = yes inherit acls = yes [stastest] path = /honda/stastest admin users = W2K3TEST+administrator, @W2K3TEST+admins writeable = yes [ericshare] path = /ericshare writeable = yes [chrisshare] path = /chrisshare writeable = yes # NOTE: If you have a BSD-style print system there is no need to # specifically define each individual printer [printers] comment = All Printers path = /var/spool/samba browseable = no # Set public = yes to allow user 'guest account' to print guest ok = no writable = no printable = yes After it gets wrung through testparm: bash-3.00# /usr/local/samba/bin/testparm Load smb config files from /usr/local/samba/lib/smb.conf Processing section "[afiles]" Processing section "[stastest]" Processing section "[ericshare]" Processing section "[chrisshare]" Processing section "[printers]" Loaded services file OK. 'winbind separator = +' might cause problems with group membership. Server role: ROLE_DOMAIN_MEMBER Press enter to see a dump of your service definitions [global] workgroup = W2K3TEST realm = W2K3TEST.LOCAL server string = croesus running samba security = ADS log file = /var/log/samba/log.%m socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192 printcap name = /etc/printcap preferred master = No idmap uid = 10000-20000 idmap gid = 10000-20000 winbind separator = + [afiles] path = /honda/afiles admin users = W2K3TEST+bobadmin, @W2K3TEST+admins read only = No inherit permissions = Yes inherit acls = Yes inherit owner = Yes [stastest] path = /honda/stastest admin users = W2K3TEST+administrator, @W2K3TEST+admins read only = No [ericshare] path = /ericshare read only = No [chrisshare] path = /chrisshare read only = No [printers] comment = All Printers path = /var/spool/samba printable = Yes browseable = No I got the logging straightened out on the Solaris machine, here's what happens when I try to add a user to the ACL. W2K3TEST+areaders is the entry I'm trying to add: [2007/10/30 14:16:53, 10] smbd/posix_acls.c:set_nt_acl(3089) set_nt_acl: called for file foo.txt [2007/10/30 14:16:53, 5] smbd/posix_acls.c:unpack_nt_owners(921) unpack_nt_owners: validating owner_sids. [2007/10/30 14:16:53, 5] smbd/posix_acls.c:unpack_nt_owners(964) unpack_nt_owners: owner_sids validated. [2007/10/30 14:16:53, 3] passdb/lookup_sid.c:fetch_sid_from_uid_cache(918) fetch sid from uid cache 10003 -> S-1-5-21-365335231-1557355366-1421764157-1644 [2007/10/30 14:16:53, 3] passdb/lookup_sid.c:fetch_sid_from_gid_cache(995) fetch sid from gid cache 10006 -> S-1-5-21-365335231-1557355366-1421764157-513 [2007/10/30 14:16:53, 3] passdb/lookup_sid.c:fetch_uid_from_cache(938) fetch uid from cache 10003 -> S-1-5-21-365335231-1557355366-1421764157-1644 [2007/10/30 14:16:53, 10] smbd/posix_acls.c:create_canon_ace_lists(1505) create_canon_ace_lists: adding file ACL: canon_ace index 0. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-1644 uid 10003 (W2K3TEST+bobadmin) SMB_ACL_USER perms rw- [2007/10/30 14:16:53, 3] passdb/lookup_sid.c:fetch_gid_from_cache(1015) fetch gid from cache 10003 -> S-1-5-21-365335231-1557355366-1421764157-1119 [2007/10/30 14:16:53, 3] passdb/lookup_sid.c:fetch_gid_from_cache(1015) fetch gid from cache 10003 -> S-1-5-21-365335231-1557355366-1421764157-1119 [2007/10/30 14:16:53, 10] smbd/posix_acls.c:create_canon_ace_lists(1505) create_canon_ace_lists: adding file ACL: canon_ace index 0. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-1119 gid 10003 (W2K3TEST+areaders) SMB_ACL_GROUP perms r-x [2007/10/30 14:16:53, 3] passdb/lookup_sid.c:fetch_gid_from_cache(1015) fetch gid from cache 10006 -> S-1-5-21-365335231-1557355366-1421764157-513 [2007/10/30 14:16:53, 3] passdb/lookup_sid.c:fetch_gid_from_cache(1015) fetch gid from cache 10006 -> S-1-5-21-365335231-1557355366-1421764157-513 [2007/10/30 14:16:53, 10] smbd/posix_acls.c:create_canon_ace_lists(1505) create_canon_ace_lists: adding file ACL: canon_ace index 0. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-513 gid 10006 (W2K3TEST+domain users) SMB_ACL_GROUP perms rw- [2007/10/30 14:16:53, 10] smbd/posix_acls.c:create_canon_ace_lists(1505) create_canon_ace_lists: adding file ACL: canon_ace index 0. Type = allow SID = S-1-1-0 other SMB_ACL_OTHER perms rw- [2007/10/30 14:16:53, 10] smbd/posix_acls.c:print_canon_ace_list(595) print_canon_ace_list: file ace - before merge canon_ace index 0. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-1644 uid 10003 (W2K3TEST+bobadmin) SMB_ACL_USER_OBJ perms rw- canon_ace index 1. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-1119 gid 10003 (W2K3TEST+areaders) SMB_ACL_GROUP perms r-x canon_ace index 2. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-513 gid 10006 (W2K3TEST+domain users) SMB_ACL_GROUP_OBJ perms rw- canon_ace index 3. Type = allow SID = S-1-1-0 other SMB_ACL_OTHER perms rw- [2007/10/30 14:16:53, 10] smbd/posix_acls.c:print_canon_ace_list(595) print_canon_ace_list: dir ace - before merge [2007/10/30 14:16:53, 10] smbd/posix_acls.c:print_canon_ace_list(595) print_canon_ace_list: file ace - before deny canon_ace index 0. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-1644 uid 10003 (W2K3TEST+bobadmin) SMB_ACL_USER_OBJ perms rw- canon_ace index 1. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-1119 gid 10003 (W2K3TEST+areaders) SMB_ACL_GROUP perms r-x canon_ace index 2. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-513 gid 10006 (W2K3TEST+domain users) SMB_ACL_GROUP_OBJ perms rw- canon_ace index 3. Type = allow SID = S-1-1-0 other SMB_ACL_OTHER perms rw- [2007/10/30 14:16:53, 10] smbd/posix_acls.c:print_canon_ace_list(595) print_canon_ace_list: dir ace - before deny [2007/10/30 14:16:53, 10] smbd/posix_acls.c:print_canon_ace_list(595) print_canon_ace_list: file ace - before valid canon_ace index 0. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-1644 uid 10003 (W2K3TEST+bobadmin) SMB_ACL_USER_OBJ perms rw- canon_ace index 1. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-1119 gid 10003 (W2K3TEST+areaders) SMB_ACL_GROUP perms r-x canon_ace index 2. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-513 gid 10006 (W2K3TEST+domain users) SMB_ACL_GROUP_OBJ perms rw- canon_ace index 3. Type = allow SID = S-1-1-0 other SMB_ACL_OTHER perms rw- [2007/10/30 14:16:53, 10] smbd/posix_acls.c:print_canon_ace_list(595) print_canon_ace_list: dir ace - before valid [2007/10/30 14:16:53, 3] smbd/dosmode.c:unix_mode(147) unix_mode(foo.txt) returning 0744 [2007/10/30 14:16:53, 10] smbd/posix_acls.c:print_canon_ace_list(595) print_canon_ace_list: file ace - return canon_ace index 0. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-1644 uid 10003 (W2K3TEST+bobadmin) SMB_ACL_USER_OBJ perms rw- canon_ace index 1. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-1119 gid 10003 (W2K3TEST+areaders) SMB_ACL_GROUP perms r-x canon_ace index 2. Type = allow SID S-1-5-21-365335231-1557355366-1421764157-513 gid 10006 (W2K3TEST+domain users) SMB_ACL_GROUP_OBJ perms rw- canon_ace index 3. Type = allow SID = S-1-1-0 other SMB_ACL_OTHER perms rw- [2007/10/30 14:16:53, 10] smbd/posix_acls.c:print_canon_ace_list(595) print_canon_ace_list: dir ace - return [2007/10/30 14:16:53, 3] smbd/posix_acls.c:convert_canon_ace_to_posix_perms(2579) convert_canon_ace_to_posix_perms: Too many ACE entries for file foo.txt to convert to posix perms. [2007/10/30 14:16:53, 3] smbd/posix_acls.c:set_nt_acl(3269) set_nt_acl: failed to convert file acl to posix permissions for file foo.txt. [2007/10/30 14:16:53, 3] smbd/error.c:error_packet(146) error packet at smbd/nttrans.c(2088) cmd=160 (SMBnttrans) NT_STATUS_ACCESS_DENIED -- To unsubscribe from this list go to the following URL and read the instructions: https://lists.samba.org/mailman/listinfo/samba man/listinfo/samba
Apparently Analagous Threads
- File permissions issue: different behavior between samba and unix
- Can't set ACLs on mounted share from windows
- reduce_name and ACL's
- Modify permission not available unless group permissions are set to write.
- NT_STATUS_ACCESS_DENIED on previously created files
Wisdom of the Ancients
