I believe if your samba server is a member in one of the workgroups and
there is a trust relationship between it and the other workgroup then
you can configure samba to allow from the other workgroup in effect
serving both workgroups.
HTH
Mike
-----Original Message-----
From: Mark Lidstone [mailto:mlidstone@bmtseatech.co.uk]
Sent: Wednesday, August 11, 2004 6:34 AM
To: samba@lists.samba.org
Subject: RE: [Samba] (no subject)
You're kinda confusing things there. A single physical network could
span multiple IP networks, and a single IP network doesn't have to be
restricted to one physical network.
Do you mean that you want to use a single server to serve to two
separate workgroups both of which are using the same physical hardware
and IP network? If so, then I don't believe so, but I could be wrong.
AFAIK it's only possible to have a server answer to multiple names in a
single workgroup ("netbios name" then "netbios aliases")
I hope this helps,
Mark Lidstone
IT and Network Support Administrator
BMT SeaTech Ltd
Grove House, Meridians Cross, 7 Ocean Way
Ocean Village, Southampton. SO14 3TJ. UK
Tel: +44 (0)23 8063 5122
Fax: +44 (0)23 8063 5144
E-Mail: mailto:mark.lidstone@bmtseatech.co.uk
Website: www.bmtseatech.co.uk
========================================================================Confidentiality
Notice and Disclaimer:
The contents of this e-mail and any attachments are intended only for
the use of the e-mail addressee(s) shown. If you are not that person, or
one of those persons, you are not allowed to take any action based upon
it or to copy it, forward, distribute or disclose the contents of it and
you should please delete it from your system. BMT SeaTech Limited does
not accept liability for any errors or omissions in the context of this
e-mail or its attachments which arise as a result of Internet
transmission, nor accept liability for statements which are those of the
author and not clearly made on behalf of BMT SeaTech Limited.
========================================================================
-----Original Message-----
From: Andrew Norman [mailto:andrew.norman@donoss.com]
Sent: 11 August 2004 14:28
To: samba@lists.samba.org
Subject: [Samba] (no subject)
Hi,
I'm new to samba and wish to know if it is possible to set up a samba
server that can be accessed from different workgroups on the same
physical network i.e. 192.168.0?
Many thanks
Andy
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
