Greetings ! First of all let me thank you for making Samba available. I am running Samba-1.9.16p11 on RedHat4.2 Linux. This is because the only Samba binary I could find that would run on SCO3.2v4.2, which is also on my LAN, was 1.9.16p11 and that same version was distributed with the RedHat. Linbox & Scobox are doing fine, so I don't want to get into any upgrade question until I resolve the problem which follows: Problem: Samba-1.9.17p2 is installed on FreeBSD2.2.5 [the included distribution] and I can ....... smbclient -L Scobox, ; from Bsdbox smbclient \\\\scobox\\share ; from Bsdbox smbclient -L Linbox ; from Bsdbox smbclient \\\\linbox\\share ; from Bsdbox without a problem. Also, all pings well. But, when I....... smbclient -L Bsdbox ; from the Bsdbox I get............ Your server software is being unfriendly ; which I resolved on Linbox & Scobox and............. lp_servicenumber: couldn't find homes lp_servicenumber: couldn't find printers I have read all 70 odd pages of the smb.conf docs that came with the Bsdbox, consulted dejanews, smb.protocol.misc and done miscellaneous web searches trying to get a handle on this. I failed. Help would be enthusiastically received. Gratitude to all, ccthomas@flash.net
Good day,
I have installed samba 2.0.5 on an Intel based Solaris 7 system.
For two days now I am trying to find some concise and precise
documentation on 'how to configure samba'.
Of course, my first stop was samba.org but did not find it very user
friendly.
Please help,
Regards,
////
(o o)
==============oOOo=(_)=oOOo============= Jean-Marc Beaudoin, T.P.
V.I.P. ExcelNet Inc.
http://www.vipxlnet.com
jmbeaudoin@vipxlnet.com
ICQ# 44484144
-----------------------------------------
Hello, I'm a beginner with Linux & Samba. I have the version 2.0.3 of Samba. But we can download the version 2.0.5 of Samba. But how do " install " this latest version ? Is it true that since the version 2.0.4 we can change unix permissions from a winnt workstation ? Thank you very much for your advices & answers ! Blaise Lab blaise.lab@cpln.ch
Hello, Can someone please tell me where to find specific and detailed documentation on how to INSTALL Samba on a Sco Unix system. We are trying to send files from Unix to NT. Please Helpppp! Regards Sharada Ali-Singh Software and Solutions Ltd 95 Edinburgh Village Chaguanas Trinidad West Indies -------------- next part -------------- HTML attachment scrubbed and removed
Hi everyone,
I am just learning SAMBA and do have a question. I am planning on
installing SAMBA on a Older HP workstation that is running HP-UX version
10.20. A script is being several times a day on this HP machine that
ftps into a remote computer and downloads data. I want to make this
data available to the users on our our office LAN which are currently
running Windows 98.
All of the documentation says that SAMBA should be installed in
/usr/local/samba. However, I want to make sure I have enough space
available on /usr. When I run BDF, the output states the following for
/usr:
Filesystem kbytes used avail
%used Mounted on
600571 396876 143637
73 /usr
Should I have enough space on this drive or should I move to another
one, such as /usr1? If I change the installation directory to /usr1, do
I need to go in and change the installation function?
Jeffrey Hovis
-------------- next part --------------
A non-text attachment was scrubbed...
Name: jeffrey.hovis.vcf
Type: text/x-vcard
Size: 373 bytes
Desc: Card for Jeffrey Hovis
Url :
http://lists.samba.org/archive/samba/attachments/20020219/be942737/jeffrey.hovis.vcf
Hi Jeffrey, get the Samba 2.2.3a binaries from http://hpux.connect.org.uk/hppd/hpux/Networking/Misc/samba-2.2.3a/ The installation path is /opt/samba and the package is in HP-UX SD Depot Format (use: gunzip and swinstall). You must have 22MB free space on /opt. Regards, Thomas -------------- next part -------------- HTML attachment scrubbed and removed
Hello! I have some question regarding the installation of Samba i a Spar Sun Solaris 8 machine. First alternative: 1) I start with the download of the file samba-latest.tar.gz. 2) The second step is > gunzip -vf samba-latest.tar.gz. 3) After that > tar -xvf samba-latest.tar. Att this point everything is OK. 4) Next step is > cd samba.2.2.4/source 5) the next step is >./configure . Thisis the step that does not work. I get thoses erros : loading cache ./config.cache checking for gcc... gcc checking whether the C compiler (gcc -O ) works... no configure: error: installation or configuration problem: C compiler cannot create executables. I seems tha I have some wrong configuration in my machine. Second Alternative: 1) Downloading of the file samba-2.2.4-sparc-solaris-2.8.pkg.gz. 2) > cp samba-2.2.4-sparc-solaris-2.8.pkg.gz samba-2.2.4-sparc-solaris-2.8.pkg 3) > pkgadd -d samba-2.2.4-sparc-solaris-2.8.pkg. All seems be installed. Untill now everything is Ok. And I start nmbd OK start smbd Not OK -----Why I can not start smbd? I appreciate your answers. BR /Daniel Rivera
Can I have installation and configuration steps for Sam a?
I am a newbie in Linux and I wish to install Samba but Red hat looks so different from MS products that I have no idea how applications can be installed in Linux. i have downloaded the .tar.gz samba file but now I am stuck. How do i go about installing Samba? Titus,
Titus: If you are using Redhat, it would be much easier to install there latest rpm. However if you want the latest Samba, when you unzip the one you have, there will be instructions. It is usually in a file called INSTALL or something similar. Hope that helps. Stu...... -----Original Message----- From: samba-admin@lists.samba.org [mailto:samba-admin@lists.samba.org]On Behalf Of Titus Syengo Sent: October 1, 2002 10:30 PM To: samba@samba.org Subject: [Samba] Samba Installation I am a newbie in Linux and I wish to install Samba but Red hat looks so different from MS products that I have no idea how applications can be installed in Linux. i have downloaded the .tar.gz samba file but now I am stuck. How do i go about installing Samba? Titus, -- To unsubscribe from this list go to the following URL and read the instructions: http://lists.samba.org/mailman/listinfo/samba
U must first unpack the tar.gz file. Use this from monitor window. tar -zxvf (your tar.gz file) cd to the samba dir ans cd to source.Type ./configure make make install Read both any README file and INSTALL as suggested by the other reader. U can see the options by typing ./configure --help To later mount a samba file system you should use this option ./configure --with-smbmount Check the syntaks. --- Stewart Thompson <stewart.thompson@shaw.ca> skrev:> Titus: > > If you are using Redhat, it would be much easier to > install there > latest rpm. However if you want the latest Samba, > when you unzip the > one you have, there will be instructions. It is > usually in a file called > INSTALL or something similar. Hope that helps. > > Stu...... > > > -----Original Message----- > From: samba-admin@lists.samba.org > [mailto:samba-admin@lists.samba.org]On > Behalf Of Titus Syengo > Sent: October 1, 2002 10:30 PM > To: samba@samba.org > Subject: [Samba] Samba Installation > > > I am a newbie in Linux and I wish to install Samba > but Red hat looks so > different from MS products that I have no idea how > applications can be > installed in Linux. i have downloaded the .tar.gz > samba file but now I > am stuck. How do i go about installing Samba? > > Titus, > > > > -- > To unsubscribe from this list go to the following > URL and read the > instructions: > http://lists.samba.org/mailman/listinfo/samba > > -- > To unsubscribe from this list go to the following > URL and read the > instructions: http://lists.samba.org/mailman/listinfo/samba______________________________________________________ Se den nye Yahoo! Mail p? http://no.yahoo.com/ Nytt design, enklere ? bruke, alltid tilgang til Adressebok, Kalender og Notisbok
Hi Guys,
Can anyone cross check the steps regarding samba installation in Unix
1. Download package
2. ./configure from source directory
3.make
4. make install
5. Made following smb.conf file (File I have created)
[global]
workgroup = lansource.sto
netbios name = GARG
encrypt passwords=yes
server string = Ashish Samba
security = domain
domain logons = yes
#Debugging Information
log level = 2
log file = /export/home/cbank/ashish/logs
max log size = 50
debug timestamp = yes
[sources]
comment = PVCS Check in Directory
path = /export/home/cbank/ashish
read only = yes
guest ok = yes
domain master = no
6. testparm smb.conf
loaded successfully
7. Stated daemons
/usr/local/samba/smbd -D
/usr/local/samba/nmbd -D
8. smbd testing :
/usr/local/samba/bin > smbclient -U% -L localhost
added interface ip=192.168.219.7 bcast=192.168.219.63 nmask=255.255.255.192
Domain=[LANSOURCE.STO] OS=[Unix] Server=[Samba 2.2.8a]
Sharename Type Comment
--------- ---- -------
sources Disk PVCS Check in Directory
IPC$ IPC IPC Service (Ashish Samba)
ADMIN$ Disk IPC Service (Ashish Samba)
Server Comment
--------- -------
GARG Ashish Samba
Workgroup Master
--------- -------
LANSOURCE.STO GARG
9. smbd testing by netstat :
# netstat -a | grep 139
*.41394 *.* 0 0 24576 0 BOUND
#
10 But when i do same for nmbd port --- i don't get any output
# netstat -a | grep 137
*.41394 *.* 0 0 24576 0 BOUND
#
1. Can anyone suggest why it is happening
2. Neither I am able to see my samba share in windiows clientt
First I just wanted to confirmn that at least daemons are OKKK... Please confirm
Your inputs are most welcome. I have already spent 3 days on all this. My
special Thanks to manjula who has helped me
rgds
ashish
-----Ursprungligt meddelande-----
Fr?n: Farkas Levente [mailto:lfarkas@bnap.hu]
Skickat: fr 2003-05-09 10:08
Till: Samba List
Kopia:
?mne: [Samba] oplock error
hi,
my smbd.log file is full of such messages:
-----------------------------
[2003/05/09 09:35:42, 0] smbd/oplock_linux.c:linux_init_kernel_oplocks(287)
Failed to setup RT_SIGNAL_LEASE handler
[2003/05/09 09:37:27, 0] smbd/oplock_linux.c:linux_init_kernel_oplocks(287)
Failed to setup RT_SIGNAL_LEASE handler
-----------------------------
on redhat9 with kernel-2.4.20-9 and samba-2.2.7a-8.9.0.
it's a real problem or just some kind of debug info?
is there any solutions not to get these messages?
thanks in advance.
--
Levente "Si vis pacem para bellum!"
--
To unsubscribe from this list go to the following URL and read the
instructions: http://lists.samba.org/mailman/listinfo/samba
Hi, first of all i am Samba beginner! I have this problem : Samba-2.2.7a is just runing on my Linux Server. I will now install the new Version of samba-2.2.28a When i do ./configure, make and make-> install->smbstatus I see that there is still old Version runing and not Samba-2.2.8a?!! My old samba is installed in /etc/samba and the new vesion is downloaded and installed ( i hope) in /usr/local/samba-2.2.8a thnks for your reply Henry
Hi Thomas, As i wrote that's still the old Version: /usr/local/samba-2.2.8a/bin/smbstatus --> samba version 2.2.7a-SUSE When i type "Which smbstatus" i get /usr/bin /smbstatus I dont know what you mean with : For startup the samba processes you should change your Startscript in "/etc/init.d/samba" where the other version is still started. Sorry,what should i do with /init.d/samba ? Thanks henry Hi, please try "/usr/local/samba-2.2.8a/bin/smbstatus" Might be, you have a standard installation on your system. Type "which smbstatus" and you will see which prgram are in your default path ($PATH variable) For startup the samba processes you should change your Startscript in "/etc/init.d/samba" where the other version is still started. - Thomas A.A wrote:> Hi,
Hello Folks, I want to install new version of samba but have already old version of samba which came with Linux 8.0. Please advise, I want to install new version of samba ... How would I un-install old version which came with Linux8.0 ? Do i really need to do so, in order to install new version of samba ? Do i reallly need to remove any files or pkgs before i install new version ? which ? thanks, --------------------------------- Do you Yahoo!? The New Yahoo! Shopping - with improved product search