Hello, I need configure samba, my system is HP N4000 with HPUX 11.0 No problem for the installation of samba 2.2.3a I have problem with configuration process (I think so), use testparm and is OK, daemons are up and running. tvsaha:/etc # testparm Load smb config files from /opt/samba/lib/smb.conf Processing section "[test]" Global parameter encrypt passwords found in service section! Loaded services file OK. Press enter to see a dump of your service definitions tvsaha:/etc # ps -ef |grep mbd |grep -v grep root 20971 1 0 17:45:10 ? 0:08 nmbd -D root 20969 1 0 17:45:10 ? 0:00 smbd -D I have the follow message with smbclient command tvsaha:/etc # smbclient -U% -L localhost added interface ip=133.1.13.30 bcast=133.1.13.31 nmask=255.255.255.240 added interface ip=133.1.12.25 bcast=133.1.12.31 nmask=255.255.255.240 added interface ip=16.1.1.1 bcast=16.1.1.255 nmask=255.255.255.0 Domain=[SIMPLE] OS=[Unix] Server=[Samba 2.2.3a] tree connect failed: SUCCESS - 0 I use documentacion for linux. Thank you. Rogelio Cuadros
Servicio Administracion HP wrote:> > Hello, > I need configure samba, my system is HP N4000 with HPUX 11.0 > No problem for the installation of samba 2.2.3a > I have problem with configuration process (I think so), use testparm > and is OK, daemons are up and running.> tvsaha:/etc # smbclient -U% -L localhost > added interface ip=133.1.13.30 bcast=133.1.13.31 > nmask=255.255.255.240 > added interface ip=133.1.12.25 bcast=133.1.12.31 > nmask=255.255.255.240 > added interface ip=16.1.1.1 bcast=16.1.1.255 > nmask=255.255.255.0 > Domain=[SIMPLE] OS=[Unix] Server=[Samba 2.2.3a] > tree connect failed: SUCCESS - 0This usually means somthing very bad happend. Look in the server logs, and see if you have a PANIC. Try Samba 2.2.6pre2. Andrew Bartlett -- Andrew Bartlett abartlet@pcug.org.au Manager, Authentication Subsystems, Samba Team abartlet@samba.org Student Network Administrator, Hawker College abartlet@hawkerc.net http://samba.org http://build.samba.org http://hawkerc.net