Hi All Can't connect WinXP (Remark: Group=SEC WinXP=M40G Samba Server=server.ltsp ipchains stop) # mount -t smbfs //M40G/Shared /mnt/WinXP/ params.c:Parameter() - Ignoring badly formed line in configuration file: 127.0.0.1 localhost localhost.localdomain params.c:Parameter() - Ignoring badly formed line in configuration file: 192.168.0.1 M40G params.c:Parameter() - Unexpected end-of-file at: 192.168.0.254 server.ltsp Error connecting to 218.188.78.190 (Network is unreachable) 3049: Connection to M40G failed SMB connection failed # testparm Load smb config files from /etc/samba/smb.conf Processing section "[test]" params.c:Parameter() - Ignoring badly formed line in configuration file: 127.0.0.1 localhost localhost.localdomain params.c:Parameter() - Ignoring badly formed line in configuration file: 192.168.0.1 M40G params.c:Parameter() - Unexpected end-of-file at: 192.168.0.254 server.ltsp Loaded services file OK. Configure File ==========#/etc/samba/smb.conf # Samba config file created using SWAT # from localhost.localdomain (127.0.0.1) # Date: 2002/08/05 16:52:24 # Global parameters [global] workgroup = SEC security = SHARE guest account = M40G [test] comment = test share path = /test writable = yes browseable = yes follow symlinks = yes wide links = yes public = yes read only = No guest ok = Yes guest only = Yes # /etc/hosts # Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1 localhost localhost.localdomain 192.168.0.1 M40G 192.168.0.254 server.ltsp Kindly advise. Thanks in advance. Stephen Liu
Do you really have those last few lines in smb.conf instead of /etc/hosts? If so, I'd have a look there first (/etc/hosts and /path/to/smb.conf are two different files). ~ Daniel satimis@writeme.com wrote:>Hi All > >Can't connect WinXP > >(Remark: Group=SEC WinXP=M40G >Samba Server=server.ltsp >ipchains stop) > ># mount -t smbfs //M40G/Shared /mnt/WinXP/ >params.c:Parameter() - Ignoring badly formed line in configuration file: >127.0.0.1 localhost localhost.localdomain >params.c:Parameter() - Ignoring badly formed line in configuration file: >192.168.0.1 M40G >params.c:Parameter() - Unexpected end-of-file at: 192.168.0.254 server.ltsp >Error connecting to 218.188.78.190 (Network is unreachable) >3049: Connection to M40G failed >SMB connection failed > > ># testparm >Load smb config files from /etc/samba/smb.conf >Processing section "[test]" >params.c:Parameter() - Ignoring badly formed line in configuration file: >127.0.0.1 localhost localhost.localdomain >params.c:Parameter() - Ignoring badly formed line in configuration file: >192.168.0.1 M40G >params.c:Parameter() - Unexpected end-of-file at: 192.168.0.254 server.ltsp >Loaded services file OK. > > >Configure File >==========>#/etc/samba/smb.conf ># Samba config file created using SWAT ># from localhost.localdomain (127.0.0.1) ># Date: 2002/08/05 16:52:24 > ># Global parameters >[global] > workgroup = SEC > security = SHARE > guest account = M40G > >[test] > comment = test share > path = /test > writable = yes > browseable = yes > follow symlinks = yes > wide links = yes > public = yes > read only = No > guest ok = Yes > guest only = Yes > > ># /etc/hosts ># Do not remove the following line, or various programs ># that require network functionality will fail. >127.0.0.1 localhost localhost.localdomain >192.168.0.1 M40G >192.168.0.254 server.ltsp > >Kindly advise. > >Thanks in advance. > >Stephen Liu >
Hi Daniel, Thanks for your response.>> Do you really have those last few lines in smb.conf instead of >> /etc/hosts? If so, I'd have a look there first (/etc/hosts and >> /path/to/smb.conf are two different files). >Yes. That is the complete content of /etc/samba/smb.conf Re-tried # mount -t smbfs //M40G/Shared /mnt/WinXP params.c:Parameter() - Ignoring badly formed line in configuration file: 127.0.0.1 localhost localhost.localdomain params.c:Parameter() - Ignoring badly formed line in configuration file: 192.168.0.1 M40G params.c:Parameter() - Unexpected end-of-file at: 192.168.0.254 server.ltsp Password: (there is no password. I just hit [Enter] It seems connected but I could not find the shared folder of WinXP # cd /mnt/WinXP/ # ls # /etc/hosts # Do not remove the following line, or various programs # that require network functionality will fail. 127.0.0.1 localhost.localdomain localhost 192.168.0.1 M40G 192.168.0.254 server.ltsp server (Remark: 1) The server is a LTSP server. M40G (PC) works as a standalone WS and Diskless Workstation as well 2) In this test I change the last 2nd line to read as "192.168.0.1 M40G. Before it reads as "192.168.0.1 ws001") However I could not find /path/to/smb.conf However to change those badly formed lines in /etc/smb.conf? Thanks Stephen Liu>> satimis@writeme.com wrote: >> >>> Hi All >>> >>> Can't connect WinXP >>> >>> (Remark: Group=SEC WinXP=M40G >>> Samba Server=server.ltsp >>> ipchains stop) >>> >>> # mount -t smbfs //M40G/Shared /mnt/WinXP/ >>> params.c:Parameter() - Ignoring badly formed line in configuration >>> file: 127.0.0.1 localhost localhost.localdomain >>> params.c:Parameter() - Ignoring badly formed line in configuration >>> file: 192.168.0.1 M40G >>> params.c:Parameter() - Unexpected end-of-file at: 192.168.0.254 >>> server.ltsp >>> Error connecting to 218.188.78.190 (Network is unreachable) >>> 3049: Connection to M40G failed >>> SMB connection failed >>> >>> >>> # testparm >>> Load smb config files from /etc/samba/smb.conf >>> Processing section "[test]" >>> params.c:Parameter() - Ignoring badly formed line in configuration >>> file: 127.0.0.1 localhost localhost.localdomain >>> params.c:Parameter() - Ignoring badly formed line in configuration >>> file: 192.168.0.1 M40G >>> params.c:Parameter() - Unexpected end-of-file at: 192.168.0.254 >>> server.ltsp >>> Loaded services file OK. >>> >>> >>> Configure File >>> ==========>>> #/etc/samba/smb.conf >>> # Samba config file created using SWAT >>> # from localhost.localdomain (127.0.0.1) >>> # Date: 2002/08/05 16:52:24 >>> >>> # Global parameters >>> [global] >>> workgroup = SEC >>> security = SHARE >>> guest account = M40G >>> >>> [test] >>> comment = test share >>> path = /test >>> writable = yes >>> browseable = yes >>> follow symlinks = yes >>> wide links = yes >>> public = yes >>> read only = No >>> guest ok = Yes >>> guest only = Yes >>> >>> >>> # /etc/hosts >>> # Do not remove the following line, or various programs >>> # that require network functionality will fail. >>> 127.0.0.1 localhost localhost.localdomain >>> 192.168.0.1 M40G >>> 192.168.0.254 server.ltsp >>> >>> Kindly advise. >>> >>> Thanks in advance. >>> >>> Stephen Liu >>