Hi,
I am trying to send bulk sms using sms_client using GSM/GPRS
ANALOGIC MODEM .
Below is the log file
-----------------------------------------------------------------------------
MODEM: Toggle DTR 1000000 Microseconds
MODEM: Toggle DTR 1000000 Microseconds
MDM_send: Drain required.
WARNING: read() Timeout
Written String: +<CR>+
Written String: +<CR>+
Written String: +ATE0<CR>+
WARNING: read() Timeout
ERROR: Timeout: searching for +<CR><LF>+ failed after 10 seconds
Received String: +EE<ENQ>T<BS>a+
ERROR: MODEM: Setting Local echo Failed
----------------------------------------------------------------------------------------------
and also SMS_MODEM Config
MDM_lock_dir = "/var/lock" # Lock directory
MDM_device = "ttyS2" # Modem Device Name
# Modem Device Name Examples:
#
# ssscxzvbnmmuoliytreDM_device = "term/00m" #
UNIXWARE
# MDM_device = "ttyS0" # Linux COM1
# MDM_device = "ttyS1" # Linux COM2
#
# MDM_device = "cua/a" # SOLARIS
# MDM_lock_platform = "SOLARIS" # Set this so that we generate
# Solaris compatible lock file
# names
# ------------------------------------------------------------
# MDM_pause_after_connect = 3000000 # Pause after the
connection
# string for 3 seconds
MDM_command_prefix = "AT"
MDM_init_command = "Z"
MDM_dial_command = "DT"
MDM_number_prefix = "0" # Number to dial to
get an
# external line.
MDM_set_local_echo_off = "E0"
MDM_disable_echo_test = NO # Test and Set local
echo
# YES/NO
# ------------------------------------------------------------
MDM_dtr_hangup_sleep = 3000000 # How many
microseconds should
MDM_dtr_init_sleep = 1000000 # I lower DTR during
# init/hangup
# -------------------
vvvvvvvxxxxxxxxxxxxxxxxxx
-----------------------------------------
MDM_command_suffix = "\r"
MDM_response_prefix = "\r\n"
MDM_response_suffix = "\r\n"
MDM_flow_control = "Hardware" # Software or Hardware
# ------------------------------------------------------------
MDM_hangup_command = "H"
MDM_attention_command = "+++"
MDM_soft_hangup_retries = 0 # Number of times I
should
# continue sending
hangup code
# If 0 then don''t
bother
# and rely on lowering
DTR
MDM_guard_time = 1750000 # Microsecond delay
before and
# After transmitting
attention command
MDM_esc_time = 125000 # Microsecond delay
between each
# character of the
attention command
# ------------------------------------------------------------
MDM_lock_action = "BLOCK"
MDM_lock_retry_delay = 5000000 # Microsecond delay to
wait before
# retrying for modem
lock.
}
-------------------------------------------------------------------------------------------------------------------
can somebody help me out why its failing at time of receving string.
**I dont know even this is right group for discuss this topic.Because
on odir.com I search lot from where we start new thread