Hi all, I am running R 2.0.1 under Windows XP in German. I configured my path as follows: C:\Programme\R\rw2001\bin;C:\Programme\xemacs-packages\lib-src\;C:\Programme\XEmacs-21.4.13\i586-pc-win32 I can not start R proccess or ESS from within XEmacs. What is going wrong? I can not start S. M-x S gives "no matching" How can I configure XEmacs for STATA 8? Thanks for your help. M -- ----------------------------------- Mahdi Osman (PhD) E-mail: m_osm at gmx.net ----------------------------------- DSL Komplett von GMX +++ Supergünstig und stressfrei einsteigen! AKTION "Kein Einrichtungspreis" nutzen: http://www.gmx.net/de/go/dsl
There is an ESS mailing list that might be more appropriate. I use emacs rather than Xemacs, but I think you need to point the path to ess in init.el file which is located on the home directory. E.g. : (setq ess-icon-directory "C:/Programme/xemacs-packages/etc/ess") (require 'ess-site) Follow the excellent instructions at John Fox's website http://socserv.mcmaster.ca/jfox/Books/Companion/ESS/ Then to start R, try 'M-x R'. Regards, Adai On Thu, 2005-03-03 at 23:57 +0100, Mahdi Osman wrote:> Hi all, > > I am running R 2.0.1 under Windows XP in German. I configured my path as > follows: > > C:\Programme\R\rw2001\bin;C:\Programme\xemacs-packages\lib-src\;C:\Programme\XEmacs-21.4.13\i586-pc-win32 > > I can not start R proccess or ESS from within XEmacs. What is going wrong? > > I can not start S. M-x S gives "no matching" > > How can I configure XEmacs for STATA 8? > > Thanks for your help. > > > M > >
Hi,> -----Original Message----- > From: r-help-bounces at stat.math.ethz.ch > [mailto:r-help-bounces at stat.math.ethz.ch] On Behalf Of Mahdi Osman > Sent: Thursday, March 03, 2005 11:57 PM > To: r-help at stat.math.ethz.ch > Subject: [R] ESS > > > I can not start R proccess or ESS from within XEmacs. What is > going wrong?Do you have a HOME directory? AFAIK, XEmacs is going there to check for the file .emacs or for .xemacs/init.el. If you don't have one, I think XEmacs is checking C:\ as the default location. In my init.el-file I have the following lines: (load "u:\\XEmacs\\xemacs-packages\\lisp\\ess\\ess-site") (add-path "u:\\XEmacs\\xemacs-packages\\lisp\\ess\\") (require 'ess-site) Most likely you have to modify them according to your own settings. ;-) You also have to modify the file ess-site.el In my version of ESS you find the important lines you have to change at about line 325. (If I remember correctly, the location in previous versions of ESS was about line 250). My line for R looks like: (setq-default inferior-R-program-name "U:\\R\\rw2001\\bin\\Rterm.exe") ; msdos systems> > I can not start S. M-x S gives "no matching"Try M-x R> > How can I configure XEmacs for STATA 8?Probably the wrong mailing list? However, if you have ESS corretly configured, you can open any *.do file and XEmacs switches to ESS[STA] mode and supports syntax highlighting and probably a lot more (I haven't used Stata for a while now - thanks to R). Hope this helps. Best, Roland P.S. This is my version of ESS: ;;; ess-site.el --- user customization of ess-mode ;; Copyright (C) 1993 David M. Smith ;; Copyright (C) 1997--2004 A.J. Rossini, R.M. Heiberger, Martin ;; Maechler, Kurt Hornik, Rodney Sparapani, and Stephen Eglen. ;; Author: David Smith <D.M.Smith at lancaster.ac.uk> ;; Maintainer: A.J. Rossini <rossini at u.washington.edu>, ;; Martin Maechler <maechler at stat.math.ethz.ch> ;; Created: 12 Nov 1993 ;; Modified: $Date: 2004/07/28 15:07:04 $ ;; Version: $Revision: 1.3 $ ;; RCS: $Id: ess-site.el,v 1.3 2004/07/28 15:07:04 rsparapa Exp $ +++++ This mail has been sent through the MPI for Demographic Rese...{{dropped}}
I did not suggest the use of emacs over Xemacs (or vice versa) but was merely suggesting that I have little experience with Xemacs and thus may advice may be inaccurate to some level. I do not know why Stata does not work for you. I never used Stata and this is neither a Stata nor ESS mailing list. This is the R-help. Have you checked : https://stat.ethz.ch/mailman/listinfo/ess-help http://stat.ethz.ch/ESS/Manual/ess.html http://www.xemacs.org/Documentation/ On Fri, 2005-03-04 at 11:46 +0800, Shige Song wrote:> It's not possible to invoke stata8 within Emacs buffer because the CLI > interface of Stata for windows does not exist. > > Shige > > > On Fri, 04 Mar 2005 00:19:23 +0000, Adaikalavan Ramasamy > <ramasamy at cancer.org.uk> wrote: > > There is an ESS mailing list that might be more appropriate. > > > > I use emacs rather than Xemacs, but I think you need to point the path > > to ess in init.el file which is located on the home directory. E.g. : > > > > (setq ess-icon-directory "C:/Programme/xemacs-packages/etc/ess") > > (require 'ess-site) > > > > Follow the excellent instructions at John Fox's website > > http://socserv.mcmaster.ca/jfox/Books/Companion/ESS/ > > > > Then to start R, try 'M-x R'. > > > > Regards, Adai > > > > > > On Thu, 2005-03-03 at 23:57 +0100, Mahdi Osman wrote: > > > Hi all, > > > > > > I am running R 2.0.1 under Windows XP in German. I configured my path as > > > follows: > > > > > > C:\Programme\R\rw2001\bin;C:\Programme\xemacs-packages\lib-src\;C:\Programme\XEmacs-21.4.13\i586-pc-win32 > > > > > > I can not start R proccess or ESS from within XEmacs. What is going wrong? > > > > > > I can not start S. M-x S gives "no matching" > > > > > > How can I configure XEmacs for STATA 8? > > > > > > Thanks for your help. > > > > > > > > > M > > > > > > > > > > ______________________________________________ > > R-help at stat.math.ethz.ch mailing list > > https://stat.ethz.ch/mailman/listinfo/r-help > > PLEASE do read the posting guide! http://www.R-project.org/posting-guide.html > > >
Hi all, I have got a dataframe in coma delimted text format. My ESS and R processes are working well and active. I can read R help files and documentations from inside ESS. Can I perform anayltical operations such as (glm, plot ect) on elements of my dataframe (variables) from within ESS? I could do these tasks directly in Rconsole and would like to them in ESS directly. How can I sumbit commandlines relevant to my datafrom to R? Thanks for your help Cheers Mahdi -- ----------------------------------- Mahdi Osman (PhD) E-mail: m_osm at gmx.net ----------------------------------- DSL Komplett von GMX +++ Supergünstig und stressfrei einsteigen! AKTION "Kein Einrichtungspreis" nutzen: http://www.gmx.net/de/go/dsl
try and read the ess manual a bit and look at the folowing reference card http://stat.ethz.ch/ESS/refcard.pdf On Tue, 8 Mar 2005, Mahdi Osman wrote:> Hi all, > > I have got a dataframe in coma delimted text format. My ESS and R processes > are working well and active. I can read R help files and documentations from > inside ESS. > > Can I perform anayltical operations such as (glm, plot ect) on elements of > my dataframe (variables) from within ESS? I could do these tasks directly in > Rconsole and would like to them in ESS directly. > > How can I sumbit commandlines relevant to my datafrom to R? > > Thanks for your help > > > Cheers > > Mahdi > > -- > ----------------------------------- > Mahdi Osman (PhD) > E-mail: m_osm at gmx.net > ----------------------------------- > > DSL Komplett von GMX +++ Supergünstig und stressfrei einsteigen! > AKTION "Kein Einrichtungspreis" nutzen: http://www.gmx.net/de/go/dsl > > ______________________________________________ > R-help at stat.math.ethz.ch mailing list > https://stat.ethz.ch/mailman/listinfo/r-help > PLEASE do read the posting guide! http://www.R-project.org/posting-guide.html >