Charles Determan
2015-May-13 18:57 UTC
[Rd] example fails during R CMD CHECK but works interactively?
Thank you Dan but it isn't my tests that are failing (all of them pass without problem) but one of the examples from the inst/examples directory. I did try, however, to start R with the environmental variables as you suggest but it had no effect on my tests. Charles On Wed, May 13, 2015 at 1:51 PM, Dan Tenenbaum <dtenenba at fredhutch.org> wrote:> > > ----- Original Message ----- > > From: "Charles Determan" <cdetermanjr at gmail.com> > > To: r-devel at r-project.org > > Sent: Wednesday, May 13, 2015 11:31:36 AM > > Subject: [Rd] example fails during R CMD CHECK but works interactively? > > > > Greetings, > > > > I am collaborating with developing the bigmemory package and have run > > in to > > a strange problem when we run R CMD CHECK. For some reason that > > isn't > > clear to us one of the examples crashes stating: > > > > Error: memory could not be allocated for instance of type big.matrix > > > > You can see the output on the Travis CI page at > > https://travis-ci.org/kaneplusplus/bigmemory where the error starts > > at line > > 1035. This is completely reproducible when running > > devtools::check(args='--as-cran') locally. The part that is > > confusing is > > that the calls work perfectly when called interactively. > > > > Hadley comments on the 'check' page of his R packages website ( > > http://r-pkgs.had.co.nz/check.html) regarding test failing following > > R CMD > > check: > > > > Occasionally you may have a problem where the tests pass when run > > interactively with devtools::test(), but fail when in R CMD check. > > This > > usually indicates that you?ve made a faulty assumption about the > > testing > > environment, and it?s often hard to figure it out. > > > > Any thoughts on how to troubleshoot this problem? I have no idea > > what > > assumption we could have made. > > Note that R CMD check runs R with environment variables set as follows (at > least on my system; you can check $R_HOME/bin/check to see what it does on > yours): > > R_DEFAULT_PACKAGES= LC_COLLATE=C > > So try staring R like this: > > R_DEFAULT_PACKAGES= LC_COLLATE=C R > > And see if that reproduces the test failure. The locale setting could > affect tests of sort order, and the default package setting could > potentially affect other things. > > Dan > > > > > > > Regards, > > Charles > > > > [[alternative HTML version deleted]] > > > > ______________________________________________ > > R-devel at r-project.org mailing list > > https://stat.ethz.ch/mailman/listinfo/r-devel > > >[[alternative HTML version deleted]]
Charles Determan
2015-May-15 12:05 UTC
[Rd] example fails during R CMD CHECK but works interactively?
Does anyone else have any thoughts about troubleshooting the R CMD check environment? Charles On Wed, May 13, 2015 at 1:57 PM, Charles Determan <cdetermanjr at gmail.com> wrote:> Thank you Dan but it isn't my tests that are failing (all of them pass > without problem) but one of the examples from the inst/examples directory. > I did try, however, to start R with the environmental variables as you > suggest but it had no effect on my tests. > > Charles > > On Wed, May 13, 2015 at 1:51 PM, Dan Tenenbaum <dtenenba at fredhutch.org> > wrote: > >> >> >> ----- Original Message ----- >> > From: "Charles Determan" <cdetermanjr at gmail.com> >> > To: r-devel at r-project.org >> > Sent: Wednesday, May 13, 2015 11:31:36 AM >> > Subject: [Rd] example fails during R CMD CHECK but works interactively? >> > >> > Greetings, >> > >> > I am collaborating with developing the bigmemory package and have run >> > in to >> > a strange problem when we run R CMD CHECK. For some reason that >> > isn't >> > clear to us one of the examples crashes stating: >> > >> > Error: memory could not be allocated for instance of type big.matrix >> > >> > You can see the output on the Travis CI page at >> > https://travis-ci.org/kaneplusplus/bigmemory where the error starts >> > at line >> > 1035. This is completely reproducible when running >> > devtools::check(args='--as-cran') locally. The part that is >> > confusing is >> > that the calls work perfectly when called interactively. >> > >> > Hadley comments on the 'check' page of his R packages website ( >> > http://r-pkgs.had.co.nz/check.html) regarding test failing following >> > R CMD >> > check: >> > >> > Occasionally you may have a problem where the tests pass when run >> > interactively with devtools::test(), but fail when in R CMD check. >> > This >> > usually indicates that you?ve made a faulty assumption about the >> > testing >> > environment, and it?s often hard to figure it out. >> > >> > Any thoughts on how to troubleshoot this problem? I have no idea >> > what >> > assumption we could have made. >> >> Note that R CMD check runs R with environment variables set as follows >> (at least on my system; you can check $R_HOME/bin/check to see what it does >> on yours): >> >> R_DEFAULT_PACKAGES= LC_COLLATE=C >> >> So try staring R like this: >> >> R_DEFAULT_PACKAGES= LC_COLLATE=C R >> >> And see if that reproduces the test failure. The locale setting could >> affect tests of sort order, and the default package setting could >> potentially affect other things. >> >> Dan >> >> >> >> > >> > Regards, >> > Charles >> > >> > [[alternative HTML version deleted]] >> > >> > ______________________________________________ >> > R-devel at r-project.org mailing list >> > https://stat.ethz.ch/mailman/listinfo/r-devel >> > >> > >[[alternative HTML version deleted]]
Hadley Wickham
2015-May-15 12:13 UTC
[Rd] example fails during R CMD CHECK but works interactively?
Make the example print out Sys.getenv() and then manually inspect? Otherwise, you'll need to debug the code by adding print statements. Something clearly is not as you expect, so you need carefully empirically verify your assumptions about the inputs to and environment of the function. Hadley On Fri, May 15, 2015 at 7:05 AM, Charles Determan <cdetermanjr at gmail.com> wrote:> Does anyone else have any thoughts about troubleshooting the R CMD check > environment? > > Charles > > On Wed, May 13, 2015 at 1:57 PM, Charles Determan <cdetermanjr at gmail.com> > wrote: > >> Thank you Dan but it isn't my tests that are failing (all of them pass >> without problem) but one of the examples from the inst/examples directory. >> I did try, however, to start R with the environmental variables as you >> suggest but it had no effect on my tests. >> >> Charles >> >> On Wed, May 13, 2015 at 1:51 PM, Dan Tenenbaum <dtenenba at fredhutch.org> >> wrote: >> >>> >>> >>> ----- Original Message ----- >>> > From: "Charles Determan" <cdetermanjr at gmail.com> >>> > To: r-devel at r-project.org >>> > Sent: Wednesday, May 13, 2015 11:31:36 AM >>> > Subject: [Rd] example fails during R CMD CHECK but works interactively? >>> > >>> > Greetings, >>> > >>> > I am collaborating with developing the bigmemory package and have run >>> > in to >>> > a strange problem when we run R CMD CHECK. For some reason that >>> > isn't >>> > clear to us one of the examples crashes stating: >>> > >>> > Error: memory could not be allocated for instance of type big.matrix >>> > >>> > You can see the output on the Travis CI page at >>> > https://travis-ci.org/kaneplusplus/bigmemory where the error starts >>> > at line >>> > 1035. This is completely reproducible when running >>> > devtools::check(args='--as-cran') locally. The part that is >>> > confusing is >>> > that the calls work perfectly when called interactively. >>> > >>> > Hadley comments on the 'check' page of his R packages website ( >>> > http://r-pkgs.had.co.nz/check.html) regarding test failing following >>> > R CMD >>> > check: >>> > >>> > Occasionally you may have a problem where the tests pass when run >>> > interactively with devtools::test(), but fail when in R CMD check. >>> > This >>> > usually indicates that you?ve made a faulty assumption about the >>> > testing >>> > environment, and it?s often hard to figure it out. >>> > >>> > Any thoughts on how to troubleshoot this problem? I have no idea >>> > what >>> > assumption we could have made. >>> >>> Note that R CMD check runs R with environment variables set as follows >>> (at least on my system; you can check $R_HOME/bin/check to see what it does >>> on yours): >>> >>> R_DEFAULT_PACKAGES= LC_COLLATE=C >>> >>> So try staring R like this: >>> >>> R_DEFAULT_PACKAGES= LC_COLLATE=C R >>> >>> And see if that reproduces the test failure. The locale setting could >>> affect tests of sort order, and the default package setting could >>> potentially affect other things. >>> >>> Dan >>> >>> >>> >>> > >>> > Regards, >>> > Charles >>> > >>> > [[alternative HTML version deleted]] >>> > >>> > ______________________________________________ >>> > R-devel at r-project.org mailing list >>> > https://stat.ethz.ch/mailman/listinfo/r-devel >>> > >>> >> >> > > [[alternative HTML version deleted]] > > ______________________________________________ > R-devel at r-project.org mailing list > https://stat.ethz.ch/mailman/listinfo/r-devel-- http://had.co.nz/
Martin Morgan
2015-May-15 12:49 UTC
[Rd] example fails during R CMD CHECK but works interactively?
On 05/15/2015 05:05 AM, Charles Determan wrote:> Does anyone else have any thoughts about troubleshooting the R CMD check > environment?In the pkg.Rcheck directory there is a file pkg-Ex.R. LANGUAGE=en _R_CHECK_INTERNALS2_=1 $(R_HOME)/bin/R --vanilla pkge-Ex.R followed by the usual strategy of bisecting the file into smaller chunks that still reproduce the example. (this is based on my parsing of the complicated source, most relevant at https://github.com/wch/r-source/blob/trunk/src/library/tools/R/check.R#L2467 and https://github.com/wch/r-source/blob/trunk/src/library/tools/R/check.R#L36 ) Martin> > Charles > > On Wed, May 13, 2015 at 1:57 PM, Charles Determan <cdetermanjr at gmail.com> > wrote: > >> Thank you Dan but it isn't my tests that are failing (all of them pass >> without problem) but one of the examples from the inst/examples directory. >> I did try, however, to start R with the environmental variables as you >> suggest but it had no effect on my tests. >> >> Charles >> >> On Wed, May 13, 2015 at 1:51 PM, Dan Tenenbaum <dtenenba at fredhutch.org> >> wrote: >> >>> >>> >>> ----- Original Message ----- >>>> From: "Charles Determan" <cdetermanjr at gmail.com> >>>> To: r-devel at r-project.org >>>> Sent: Wednesday, May 13, 2015 11:31:36 AM >>>> Subject: [Rd] example fails during R CMD CHECK but works interactively? >>>> >>>> Greetings, >>>> >>>> I am collaborating with developing the bigmemory package and have run >>>> in to >>>> a strange problem when we run R CMD CHECK. For some reason that >>>> isn't >>>> clear to us one of the examples crashes stating: >>>> >>>> Error: memory could not be allocated for instance of type big.matrix >>>> >>>> You can see the output on the Travis CI page at >>>> https://travis-ci.org/kaneplusplus/bigmemory where the error starts >>>> at line >>>> 1035. This is completely reproducible when running >>>> devtools::check(args='--as-cran') locally. The part that is >>>> confusing is >>>> that the calls work perfectly when called interactively. >>>> >>>> Hadley comments on the 'check' page of his R packages website ( >>>> http://r-pkgs.had.co.nz/check.html) regarding test failing following >>>> R CMD >>>> check: >>>> >>>> Occasionally you may have a problem where the tests pass when run >>>> interactively with devtools::test(), but fail when in R CMD check. >>>> This >>>> usually indicates that you?ve made a faulty assumption about the >>>> testing >>>> environment, and it?s often hard to figure it out. >>>> >>>> Any thoughts on how to troubleshoot this problem? I have no idea >>>> what >>>> assumption we could have made. >>> >>> Note that R CMD check runs R with environment variables set as follows >>> (at least on my system; you can check $R_HOME/bin/check to see what it does >>> on yours): >>> >>> R_DEFAULT_PACKAGES= LC_COLLATE=C >>> >>> So try staring R like this: >>> >>> R_DEFAULT_PACKAGES= LC_COLLATE=C R >>> >>> And see if that reproduces the test failure. The locale setting could >>> affect tests of sort order, and the default package setting could >>> potentially affect other things. >>> >>> Dan >>> >>> >>> >>>> >>>> Regards, >>>> Charles >>>> >>>> [[alternative HTML version deleted]] >>>> >>>> ______________________________________________ >>>> R-devel at r-project.org mailing list >>>> https://stat.ethz.ch/mailman/listinfo/r-devel >>>> >>> >> >> > > [[alternative HTML version deleted]] > > ______________________________________________ > R-devel at r-project.org mailing list > https://stat.ethz.ch/mailman/listinfo/r-devel >-- Computational Biology / Fred Hutchinson Cancer Research Center 1100 Fairview Ave. N. PO Box 19024 Seattle, WA 98109 Location: Arnold Building M1 B861 Phone: (206) 667-2793
Martyn Plummer
2015-May-15 14:44 UTC
[Rd] example fails during R CMD CHECK but works interactively?
The error can be reproduced by running the bigmemory-Ex.R script which you can find in the bigmemory.Rcheck directory, either in batch mode or via source() in an interactive session. It seems that you have underlying memory allocation problems. I can get the script to running by adding gc() calls when necessary (i.e. when a failure is reported, add gc() just before this point in the script and rerun). Martyn On Fri, 2015-05-15 at 07:05 -0500, Charles Determan wrote:> Does anyone else have any thoughts about troubleshooting the R CMD check > environment? > > Charles > > On Wed, May 13, 2015 at 1:57 PM, Charles Determan <cdetermanjr at gmail.com> > wrote: > > > Thank you Dan but it isn't my tests that are failing (all of them pass > > without problem) but one of the examples from the inst/examples directory. > > I did try, however, to start R with the environmental variables as you > > suggest but it had no effect on my tests. > > > > Charles > > > > On Wed, May 13, 2015 at 1:51 PM, Dan Tenenbaum <dtenenba at fredhutch.org> > > wrote: > > > >> > >> > >> ----- Original Message ----- > >> > From: "Charles Determan" <cdetermanjr at gmail.com> > >> > To: r-devel at r-project.org > >> > Sent: Wednesday, May 13, 2015 11:31:36 AM > >> > Subject: [Rd] example fails during R CMD CHECK but works interactively? > >> > > >> > Greetings, > >> > > >> > I am collaborating with developing the bigmemory package and have run > >> > in to > >> > a strange problem when we run R CMD CHECK. For some reason that > >> > isn't > >> > clear to us one of the examples crashes stating: > >> > > >> > Error: memory could not be allocated for instance of type big.matrix > >> > > >> > You can see the output on the Travis CI page at > >> > https://travis-ci.org/kaneplusplus/bigmemory where the error starts > >> > at line > >> > 1035. This is completely reproducible when running > >> > devtools::check(args='--as-cran') locally. The part that is > >> > confusing is > >> > that the calls work perfectly when called interactively. > >> > > >> > Hadley comments on the 'check' page of his R packages website ( > >> > http://r-pkgs.had.co.nz/check.html) regarding test failing following > >> > R CMD > >> > check: > >> > > >> > Occasionally you may have a problem where the tests pass when run > >> > interactively with devtools::test(), but fail when in R CMD check. > >> > This > >> > usually indicates that you?ve made a faulty assumption about the > >> > testing > >> > environment, and it?s often hard to figure it out. > >> > > >> > Any thoughts on how to troubleshoot this problem? I have no idea > >> > what > >> > assumption we could have made. > >> > >> Note that R CMD check runs R with environment variables set as follows > >> (at least on my system; you can check $R_HOME/bin/check to see what it does > >> on yours): > >> > >> R_DEFAULT_PACKAGES= LC_COLLATE=C > >> > >> So try staring R like this: > >> > >> R_DEFAULT_PACKAGES= LC_COLLATE=C R > >> > >> And see if that reproduces the test failure. The locale setting could > >> affect tests of sort order, and the default package setting could > >> potentially affect other things. > >> > >> Dan > >> > >> > >> > >> > > >> > Regards, > >> > Charles > >> > > >> > [[alternative HTML version deleted]] > >> > > >> > ______________________________________________ > >> > R-devel at r-project.org mailing list > >> > https://stat.ethz.ch/mailman/listinfo/r-devel > >> > > >> > > > > > > [[alternative HTML version deleted]] > > ______________________________________________ > R-devel at r-project.org mailing list > https://stat.ethz.ch/mailman/listinfo/r-devel
Apparently Analagous Threads
- example fails during R CMD CHECK but works interactively?
- example fails during R CMD CHECK but works interactively?
- example fails during R CMD CHECK but works interactively?
- example fails during R CMD CHECK but works interactively?
- difficulty with sanitizer using bigmemory