Nut upsuser - Jun 2017 - Help with Elite 800VA usb UPS

Use the name from ups.conf in front of "@localhost".

?The re?sult is quite different ;)

root at artu:~# upsc Elit at artu
Init SSL without certificate database
Error: Driver not connected


> What if you try nutdrv_qx without specifying megatec? (It should
> autodetect.)
>
?Here is the result:

?
 root at artu:~# upsdrvctl start
Network UPS Tools - UPS driver controller 2.7.2
Network UPS Tools - Generic Q* USB/Serial driver 0.06 (2.7.2)
USB communication driver 0.32
Device not supported!
Device not supported!
Driver failed to start (exit status=1)

> If that doesn't work, please try to get some logs - they will look like
> this:
>
>    http://lists.alioth.debian.org/pipermail/nut-upsuser/
> 2017-March/010555.html
>
> The author of the driver recommends a debug level of 5: "-DDDDD"
>
> (Note that we are not looking for the debug output for upsdrvctl, but
> rather for nutdrv_qx. If you pass "-D" flags to upsdrvctl, it
should tell
> you how to start the driver in debug mode instead.)

?Here is the output of debug level 5:?


root at artu:~# /lib/nut/nutdrv_qx -a Elit -u nut -DDDDD
Network UPS Tools - Generic Q* USB/Serial driver 0.06 (2.7.2)
USB communication driver 0.32
   0.000000     debug level is '5'
   0.001187     upsdrv_initups...
   0.414464     Checking device (1D6B/0001) (006/001)
   0.477567     - VendorID: 1d6b
   0.477611     - ProductID: 0001
   0.477619     - Manufacturer: unknown
   0.477627     - Product: unknown
   0.477634     - Serial Number: unknown
   0.477648     - Bus: 006
   0.477656     Trying to match device
   0.477668     Device does not match - skipping
   0.477784     Checking device (1D6B/0001) (005/001)
   0.541404     - VendorID: 1d6b
   0.541733     - ProductID: 0001
   0.541933     - Manufacturer: unknown
   0.542124     - Product: unknown
   0.543843     - Serial Number: unknown
   0.543897     - Bus: 005
   0.543935     Trying to match device
   0.543978     Device does not match - skipping
   0.544122     Checking device (FFFF/0000) (004/004)
   0.561393     - VendorID: ffff
   0.561428     - ProductID: 0000
   0.561438     - Manufacturer:
   0.561443     - Product: 010937
   0.561457     - Serial Number:
   0.561461     - Bus: 004
   0.561466     Trying to match device
   0.561473     Device matches
   0.565355     send_to_all: SETINFO ups.vendorid "ffff"
   0.565815     send_to_all: SETINFO ups.productid "0000"
   0.566137     send: QGS
   0.566421     read: QGS
   0.566708     qx_process_answer: short reply (input.voltage)
   0.567007     send: QGS
   0.567377     read: QGS
   0.567668     qx_process_answer: short reply (input.voltage)
   0.567965     send: QGS
   0.568256     read: QGS
   0.568609     qx_process_answer: short reply (input.voltage)
   0.568952     send: M
   0.569310     read: M
   0.569498     voltronic_qs_protocol: invalid protocol [M]
   0.569678     ups_infoval_set: failed to preprocess value
[ups.firmware.aux: M]
   0.569866     send: M
   0.570071     read: M
   0.570262     voltronic_qs_protocol: invalid protocol [M]
   0.570460     ups_infoval_set: failed to preprocess value
[ups.firmware.aux: M]
   0.570653     send: M
   0.570834     read: M
   0.571024     voltronic_qs_protocol: invalid protocol [M]
   0.571213     ups_infoval_set: failed to preprocess value
[ups.firmware.aux: M]
   0.571405     send: QS
   0.571587     read: QS
   0.571781     qx_process_answer: short reply (input.voltage)
   0.571973     send: QS
   0.572155     read: QS
   0.572343     qx_process_answer: short reply (input.voltage)
   0.572532     send: QS
   0.572716     read: QS
   0.572903     qx_process_answer: short reply (input.voltage)
   0.573093     send: D
   0.573288     read: D
   0.573481     qx_process_answer: short reply (input.voltage)
   0.573673     send: D
   0.573853     read: D
   0.574041     qx_process_answer: short reply (input.voltage)
   0.574236     send: D
   0.574414     read: D
   0.574600     qx_process_answer: short reply (input.voltage)
   0.574759     send: Q1
   0.807418     received 46 (40)
   0.807475     read: (225.3 140.0 222.6 015 49.9 13.8 30.0 00001001
   0.807516     qx_process_answer: short reply (input.voltage)
   0.807548     send: Q1
   1.041418     received 46 (40)
   1.041472     read: (225.3 140.0 224.5 015 49.9 13.9 30.0 00001001
   1.041487     qx_process_answer: short reply (input.voltage)
   1.041508     send: Q1
   1.275423     received 46 (40)
   1.275476     read: (225.3 140.0 222.6 015 49.9 13.9 30.0 00001001
   1.275489     qx_process_answer: short reply (input.voltage)
   1.275511     send: Q1
   1.509410     received 46 (40)
   1.509463     read: (225.3 140.0 222.6 015 49.9 13.9 30.0 00001001
   1.509501     qx_process_answer: short reply (input.voltage)
   1.509566     send: Q1
   1.743299     received 46 (40)
   1.743344     read: (225.3 140.0 222.6 015 49.9 13.9 30.0 00001001
   1.743353     qx_process_answer: short reply (input.voltage)
   1.743365     send: Q1
   1.976367     received 46 (40)
   1.976428     read: (225.3 140.0 222.6 015 49.9 13.9 30.0 00001001
   1.976441     qx_process_answer: short reply (input.voltage)
   1.976453     send: Q1
   2.438350     received 46 (40)
   2.438409     read: (225.3 140.0 224.5 015 49.9 13.9 30.0 00001001
   2.438453     qx_process_answer: short reply (input.voltage)
   2.438523     send: Q1
   2.672338     received 46 (40)
   2.672398     read: (225.3 140.0 224.5 015 49.9 13.9 30.0 00001001
   2.672411     qx_process_answer: short reply (input.voltage)
   2.672422     send: Q1
   2.906353     received 46 (40)
   2.906411     read: (225.3 140.0 224.5 015 49.9 13.9 30.0 00001001
   2.906424     qx_process_answer: short reply (input.voltage)
   2.906444     send: Q1
   3.140343     received 46 (40)
   3.140400     read: (225.3 140.0 224.5 015 49.9 13.9 30.0 00001001
   3.140443     qx_process_answer: short reply (input.voltage)
   3.140512     send: Q1
   3.374274     received 46 (40)
   3.374321     read: (225.3 140.0 224.5 015 49.9 13.9 30.0 00001001
   3.374329     qx_process_answer: short reply (input.voltage)
   3.374337     send: Q1
   3.608246     received 46 (40)
   3.608291     read: (225.3 140.0 224.5 015 49.9 13.9 30.0 00001001
   3.608299     qx_process_answer: short reply (input.voltage)
   3.608313     Device not supported!
   3.608319     Device not supported!

?It seems I am not so lucky...

Thank you lots,
Andrea?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170609/0b2f8a1f/attachment.html>

> root at artu:~# /lib/nut/nutdrv_qx -a Elit -u nut -DDDDD
> Network UPS Tools - Generic Q* USB/Serial driver 0.06 (2.7.2)
> USB communication driver 0.32
>    0.000000     debug level is '5'
...
>    0.574759     send: Q1
>    0.807418     received 46 (40)
>    0.807475     read: (225.3 140.0 222.6 015 49.9 13.8 30.0 00001001
>    0.807516     qx_process_answer: short reply (input.voltage)
hmm, apparently the UPS doesn't close the replies to our queries with
the expected CR and we (I) did not consider that case in nutdrv_qx --
noted:
https://github.com/networkupstools/nut/issues/441

But blazer_usb, being less strict on the terminating CR of Q1 replies,
should work with your device.
> root at artu:~# upsc Elit at artu
> Init SSL without certificate database
> Error: Driver not connected
aehm, was the blazer_usb driver running?

>
> hmm, apparently the UPS doesn't close the replies to our queries with
> the expected CR and we (I) did not consider that case in nutdrv_qx --
> noted:
> https://github.com/networkupstools/nut/issues/441
>
> But blazer_usb, being less strict on the terminating CR of Q1 replies,
> should work with your device.
>
> > root at artu:~# upsc Elit at artu
> > Init SSL without certificate database
> > Error: Driver not connected
>
> aehm, was the blazer_usb driver running?
>
?This was tested with ?

?nutdrv_qx....

rroot at artu:~# upsdrvctl start
Network UPS Tools - UPS driver controller 2.7.2
Network UPS Tools - Megatec/Q1 protocol USB driver 0.11 (2.7.2)
Can't chdir to /var/run/nut: No such file or directory
Driver failed to start (exit status=1)

?but with blazer_usb seems better....

?root at artu:~# upsdrvctl start
Network UPS Tools - UPS driver controller 2.7.2
Network UPS Tools - Megatec/Q1 protocol USB driver 0.11 (2.7.2)
Supported UPS detected with megatec protocol
Rating information unavailable
Vendor information unavailable
No values provided for battery high/low voltages in ups.conf

Using 'guestimation' (low: -0.866667, high: -1.083333)!
Battery runtime will not be calculated (runtimecal not set)

but

root at artu:~# upsc Elit at artu
Error: Connection failure: Connection refused

Starting the driver with debug level 5 seems happier, but continue to cycle

root at artu:~# /lib/nut/blazer_usb -a Elit -u nut -DDDDD
Network UPS Tools - Megatec/Q1 protocol USB driver 0.11 (2.7.2)
   0.000000     debug level is '5'
   0.415024     Checking device (1D6B/0001) (006/001)
   0.478033     - VendorID: 1d6b
   0.478074     - ProductID: 0001
   0.478081     - Manufacturer: unknown
   0.478089     - Product: unknown
   0.478096     - Serial Number: unknown
   0.478103     - Bus: 006
   0.478109     Trying to match device
   0.478120     Device does not match - skipping
   0.478193     Checking device (1D6B/0001) (005/001)
   0.541928     - VendorID: 1d6b
   0.542215     - ProductID: 0001
   0.542370     - Manufacturer: unknown
   0.542525     - Product: unknown
   0.542673     - Serial Number: unknown
   0.542818     - Bus: 005
   0.542959     Trying to match device
   0.543981     Device does not match - skipping
   0.544060     Checking device (FFFF/0000) (004/004)
   0.560313     - VendorID: ffff
   0.560574     - ProductID: 0000
   0.560700     - Manufacturer:
   0.560833     - Product: 010937
   0.560958     - Serial Number:
   0.561081     - Bus: 004
   0.561205     Trying to match device
   0.561332     Device matches
   0.793308     send_to_all: SETINFO ups.vendorid "ffff"
   0.793568     send_to_all: SETINFO ups.productid "0000"
   0.793711     send_to_all: SETINFO device.type "ups"
   0.793897     send_to_all: SETINFO driver.version "2.7.2"
   0.794035     send_to_all: SETINFO driver.version.internal "0.11"
   0.794164     send_to_all: SETINFO driver.name "blazer_usb"
   0.794289     Trying megatec protocol...
   0.794402     send: Q1
   1.027417     received 46 (40)
   1.027475     read: (221.8 140.0 220.6 015 50.0 13.8 30.0 00001001
   1.027758     send_to_all: SETINFO input.voltage "221.8"
   1.027796     send_to_all: SETINFO input.voltage.fault "140.0"
   1.027839     send_to_all: SETINFO output.voltage "220.6"
   1.027903     send_to_all: SETINFO ups.load "15"
   1.027944     send_to_all: SETINFO input.frequency "50.0"
   1.027970     send_to_all: SETINFO battery.voltage "13.80"
   1.027990     send_to_all: SETINFO ups.temperature "30.0"
   1.028011     send_to_all: SETINFO ups.beeper.status "enabled"
   1.028031     send_to_all: SETINFO ups.type "offline / line
interactive"
   1.028049     send_to_all: SETINFO ups.status "OL"
   1.028058     Status read in 1 tries
   1.028067     Supported UPS detected with megatec protocol
   1.028077     send: F
   1.150426     received 21 (35)
   1.150482     read: #220.0 000 012.0 50.0
   1.150492     blazer_rating: short reply
   1.150510     Rating read 1 failed
   1.150520     send: F
   1.273356     received 21 (35)
   1.273397     read: #220.0 000 012.0 50.0
   1.273402     blazer_rating: short reply
   1.273407     Rating read 2 failed
   1.273418     send: F
   1.396336     received 21 (35)
   1.396380     read: #220.0 000 012.0 50.0
   1.396386     blazer_rating: short reply
   1.396392     Rating read 3 failed
   1.396403     Rating information unavailable
   1.396411     send: I
   1.591274     received 38 (35)
   1.591622     read: #                           TR00094S
   1.591816     blazer_vendor: short reply
   1.591925     Vendor information read 1 failed
   1.591938     send: I
   1.785267     received 38 (35)
   1.785641     read: #                           TR00094S
   1.785879     blazer_vendor: short reply
   1.786077     Vendor information read 2 failed
   1.786275     send: I
   1.980336     received 38 (35)
   1.980814     read: #                           TR00094S
   1.981136     blazer_vendor: short reply
   1.981417     Vendor information read 3 failed
   1.981633     Vendor information unavailable
   1.981900     No values provided for battery high/low voltages in ups.conf

   1.982186     send_to_all: SETINFO battery.voltage.low "-0.87"
   1.982418     send_to_all: SETINFO battery.voltage.high "-1.08"
   1.982649     Using 'guestimation' (low: -0.866667, high: -1.083333)!
   1.982878     Battery runtime will not be calculated (runtimecal not set)
   1.983106     send_to_all: SETINFO ups.delay.start "180"
   1.983331     send_to_all: SETINFO ups.delay.shutdown "30"
   1.983551     send_to_all: ADDCMD beeper.toggle
   1.983770     send_to_all: ADDCMD load.off
   1.983986     send_to_all: ADDCMD load.on
   1.984207     send_to_all: ADDCMD shutdown.return
   1.984508     send_to_all: ADDCMD shutdown.stayoff
   1.984750     send_to_all: ADDCMD shutdown.stop
   1.984862     send_to_all: ADDCMD test.battery.start
   1.984905     send_to_all: ADDCMD test.battery.start.deep
   1.985040     send_to_all: ADDCMD test.battery.start.quick
   1.985082     send_to_all: ADDCMD test.battery.stop
   1.985121     send: Q1
   2.217282     received 46 (40)
   2.217319     read: (221.8 140.0 220.6 015 50.0 13.8 30.0 00001001
   2.217362     send_to_all: DATAOK
   2.217474     dstate_init: sock /var/run/nut/blazer_usb-Elit open on fd 5
   2.217490     send_to_all: SETINFO driver.parameter.pollinterval "2"
   2.217497     send: Q1
   2.451299     received 46 (40)
   2.451338     read: (223.6 140.0 220.6 016 50.0 13.8 30.0 00001001
   2.451360     send_to_all: SETINFO input.voltage "223.6"
   2.451383     send_to_all: SETINFO ups.load "16"
   4.217877     send: Q1
   4.451260     received 46 (40)
   4.451564     read: (223.6 140.0 222.6 015 49.9 13.8 30.0 00001001
   4.451641     send_to_all: SETINFO output.voltage "222.6"
   4.451691     send_to_all: SETINFO ups.load "15"
   4.451737     send_to_all: SETINFO input.frequency "49.9"
   6.219742     send: Q1
   6.453145     received 46 (40)
   6.453182     read: (223.6 140.0 220.6 015 50.0 13.8 30.0 00001001
   6.453209     send_to_all: SETINFO output.voltage "220.6"
   6.453260     send_to_all: SETINFO input.frequency "50.0"
   8.220697     send: Q1
   8.453059     received 46 (40)
   8.453104     read: (223.6 140.0 220.6 015 49.9 13.8 30.0 00001001
   8.453143     send_to_all: SETINFO input.frequency "49.9"
  10.221828     send: Q1
  10.454997     received 46 (40)
  10.455043     read: (221.8 140.0 220.6 015 50.0 13.9 30.0 00001001
  10.455067     send_to_all: SETINFO input.voltage "221.8"
  10.455131     send_to_all: SETINFO input.frequency "50.0"
  10.455163     send_to_all: SETINFO battery.voltage "13.90"
  12.223764     send: Q1
  12.456907     received 46 (40)
  12.457129     read: (223.6 140.0 222.6 015 50.0 13.8 30.0 00001001
  12.457173     send_to_all: SETINFO input.voltage "223.6"
  12.457206     send_to_all: SETINFO output.voltage "222.6"
  12.457243     send_to_all: SETINFO battery.voltage "13.80"
  14.224891     send: Q1
  14.456862     received 46 (40)
  14.456918     read: (221.8 140.0 220.6 015 50.0 13.9 30.0 00001001
  14.456994     send_to_all: SETINFO input.voltage "221.8"
  14.457050     send_to_all: SETINFO output.voltage "220.6"
  14.457110     send_to_all: SETINFO battery.voltage "13.90"
  16.226737     send: Q1
  16.459791     received 46 (40)
  16.459847     read: (221.8 140.0 220.6 015 49.9 13.9 30.0 00001001
  16.459902     send_to_all: SETINFO input.frequency "49.9"
  18.228598     send: Q1
  18.461662     received 46 (40)
  18.461702     read: (223.6 140.0 220.6 015 49.9 13.8 30.0 00001001
  18.461723     send_to_all: SETINFO input.voltage "223.6"
  18.461850     send_to_all: SETINFO battery.voltage "13.80"
  20.230537     send: Q1
  20.463680     received 46 (40)
  20.463735     read: (221.8 140.0 220.6 015 49.9 13.9 30.0 00001001
  20.463770     send_to_all: SETINFO input.voltage "221.8"
  20.463870     send_to_all: SETINFO battery.voltage "13.90"
  22.232394     send: Q1
  22.464495     received 46 (40)
  22.464530     read: (227.0 140.0 226.5 015 50.0 13.9 30.0 00001001
  22.464547     send_to_all: SETINFO input.voltage "227.0"
  22.464564     send_to_all: SETINFO output.voltage "226.5"
  22.464574     send_to_all: SETINFO input.frequency "50.0"
  24.232629     send: Q1
  24.466477     received 46 (40)
  24.466536     read: (221.8 140.0 220.6 015 49.9 13.9 30.0 00001001
  24.466572     send_to_all: SETINFO input.voltage "221.8"
  24.466653     send_to_all: SETINFO output.voltage "220.6"
  24.466707     send_to_all: SETINFO input.frequency "49.9"
  26.234547     send: Q1
  26.467332     received 46 (40)
  26.467541     read: (221.8 140.0 220.6 015 50.0 13.8 30.0 00001001
  26.467588     send_to_all: SETINFO input.frequency "50.0"
  26.467615     send_to_all: SETINFO battery.voltage "13.80"
  28.236383     send: Q1
  28.469320     received 46 (40)
  28.469377     read: (223.6 140.0 220.6 015 50.0 13.8 30.0 00001001
  28.469420     send_to_all: SETINFO input.voltage "223.6"
  30.238212     send: Q1
  30.471209     received 46 (40)
  30.471245     read: (221.8 140.0 220.6 015 49.9 13.9 30.0 00001001
  30.471262     send_to_all: SETINFO input.voltage "221.8"
  30.471278     send_to_all: SETINFO input.frequency "49.9"
  30.471301     send_to_all: SETINFO battery.voltage "13.90"
  32.240077     send: Q1
  32.473109     received 46 (40)
  32.473145     read: (221.8 140.0 220.6 015 50.0 13.9 30.0 00001001
  32.473172     send_to_all: SETINFO input.frequency "50.0"
  34.241808     send: Q1
  34.475070     received 46 (40)
  34.475115     read: (220.1 140.0 218.6 014 49.9 13.9 30.0 00001001
  34.475139     send_to_all: SETINFO input.voltage "220.1"
  34.475191     send_to_all: SETINFO output.voltage "218.6"
  34.475223     send_to_all: SETINFO ups.load "14"
  34.475254     send_to_all: SETINFO input.frequency "49.9"
  36.243749     send: Q1
  36.476959     received 46 (40)
  36.477283     read: (221.8 140.0 220.6 014 50.0 13.8 30.0 00001001
  36.477358     send_to_all: SETINFO input.voltage "221.8"
  36.477419     send_to_all: SETINFO output.voltage "220.6"
  36.477482     send_to_all: SETINFO input.frequency "50.0"
  36.477542     send_to_all: SETINFO battery.voltage "13.80"
  38.245683     send: Q1
  38.478868     received 46 (40)
  38.478954     read: (221.8 140.0 220.6 015 50.0 13.8 30.0 00001001
  38.478997     send_to_all: SETINFO ups.load "15"
  40.247557     send: Q1
  40.479832     received 46 (40)
  40.479891     read: (221.8 140.0 220.6 015 49.9 13.8 30.0 00001001
  40.479955     send_to_all: SETINFO input.frequency "49.9"
  42.249436     send: Q1
  42.482780     received 46 (40)
  42.482838     read: (220.1 140.0 218.6 015 50.0 13.8 30.0 00001001
  42.482873     send_to_all: SETINFO input.voltage "220.1"
  42.482905     send_to_all: SETINFO output.voltage "218.6"
  42.482934     send_to_all: SETINFO input.frequency "50.0"

Thank you again,
A.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20170610/b5bad75a/attachment-0001.html>