Nut upsuser - Dec 2013 - Delayed UPS start up after shutdown?

Hello.

I am faced with a configuration where the OS (Debian 6.0.8) and the PC 
shut down before the UPS (MGE Protection Center 675). Also, the UPS 
restores power to attached devices as soon as main power is back but the 
PC does not detect power restorations that occur less than a couple of 
seconds, say 10, after its power supply has been cut. As a result, if 
main power comes back within 10 seconds after the UPS has been shut 
down, the UPS will power up the PC but the latter will not start.

Does anyone have an idea how I could handle this situation?

Regards:
Angel Tsankov

Hi, 

I own one a MGE Protection Center 675. You can change the
parameter ups.delay.start into your UPS to set the "Interval to wait
before (re)starting the load (seconds)" 

use upsset to change the
value. 

Regards,
Ren? 

Le 2013-12-06 15:14, Angel Tsankov a ?crit :

> Hello.
> 
> I am faced with a configuration where the OS (Debian
6.0.8) and the PC 
> shut down before the UPS (MGE Protection Center
675). Also, the UPS 
> restores power to attached devices as soon as
main power is back but the 
> PC does not detect power restorations that
occur less than a couple of 
> seconds, say 10, after its power supply
has been cut. As a result, if 
> main power comes back within 10 seconds
after the UPS has been shut 
> down, the UPS will power up the PC but
the latter will not start.
> 
> Does anyone have an idea how I could
handle this situation?
> 
> Regards:
> Angel Tsankov
> 
>
_______________________________________________
> Nut-upsuser mailing
list
> Nut-upsuser at lists.alioth.debian.org
>
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
[1]

 

Links:
------
[1]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsuser
-------------- section suivante --------------
Une pi?ce jointe HTML a ?t? nettoy?e...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20131206/c41db3f4/attachment.html>

> Le 2013-12-06 15:14, Angel Tsankov a ?crit?:
> ...if main power comes back within 10 seconds after the UPS has been 
> shut down, the UPS will power up the PC but the latter will not start.
On Fri, 6 Dec 2013, Rene Garcia wrote:
> .... You can change the parameter ups.delay.start into your UPS to set 
> the "Interval to wait before (re)starting the load (seconds)"
> use upsset to change the value.
Hi, You could also place a declaration such as

   ondelay = 60

in file ups.conf.

Regards, Roger

Hello, Ren?.
> You can change the parameter
> ups.delay.start into your UPS to set the "Interval to wait before
> (re)starting the load (seconds)"
>
> use upsset to change the value.
So far, the ups.delay.start parameter in my MGE Protection Center 675 
has always been equal to the driver.parameter.ondelay parameter (which 
equals the ondelay argument in ups.conf). Furthermore, whenever I have 
changed the ondelay argument in ups.conf (and restarted NUT) the above 
parameters have always been set equal to ondelay. Therefore, I would 
assume that ups.delay.start cannot help. Do you have any reason to 
consider this assumption might be wrong?

Regards:
Angel