O.S. Ubuntu 10.10, Maverick Meerkat 32 bit.
NUT 2.4.3-1ubuntu5, package installed
Belkin F6C1500-TW-RK
I am having trouble starting uspd whenever I add a client from my lan to
uspd.conf:
LISTEN 127.0.0.1 3493
LISTEN 192.168.36.106 3493
naknight at nak-server:~$ sudo upsd -DDDD
Network UPS Tools upsd 2.4.3
0.000000 listen_add: added 127.0.0.1:3493
0.000093 listen_add: added 192.168.36.106:3495
0.000224 setuptcp: try to bind to 192.168.36.106 port 3495
0.000428 setuptcp: bind: Cannot assign requested address
0.000455 not listening on 192.168.36.106 port 3495
naknight at nak-server:~$
It is not clear to me if I need to edit hosts.allow, but I added "upsd :
naknight at 192.168.36.106", and it didn't seem to make any difference.
The software seems to behave as expected when uspd.conf is setup for
localhost:
LISTEN 127.0.0.1 3493
naknight at nak-server:/etc$ sudo upsd -DDDD
Network UPS Tools upsd 2.4.3
0.000000 listen_add: added 127.0.0.1:3493
0.000103 setuptcp: try to bind to 127.0.0.1 port 3493
0.000379 listening on 127.0.0.1 port 3493
0.000708 Connected to UPS [Belkin]: usbhid-ups-Belkin
0.001701 mainloop: polling 2 filedescriptors
0.001842 mainloop: polling 2 filedescriptors
0.001950 mainloop: polling 2 filedescriptors
0.002065 mainloop: polling 2 filedescriptors
0.002179 mainloop: polling 2 filedescriptors
0.002225 UPS [Belkin]: dump is done
0.002243 mainloop: polling 2 filedescriptors
0.445070 Connect from 127.0.0.1
0.445099 mainloop: polling 3 filedescriptors
0.445263 write: [destfd=6] [len=3] [OK]
0.445283 mainloop: polling 3 filedescriptors
0.445436 write: [destfd=6] [len=3] [OK]
0.445456 mainloop: polling 3 filedescriptors
0.445682 User admin at 127.0.0.1 logged into UPS [Belkin]....
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20110929/45506c9d/attachment.html>
On Sep 29, 2011, at 5:45 PM, Neil Knight wrote:> O.S. Ubuntu 10.10, Maverick Meerkat 32 bit. > NUT 2.4.3-1ubuntu5, package installed > Belkin F6C1500-TW-RK > > I am having trouble starting uspd whenever I add a client from my > lan to uspd.conf: > LISTEN 127.0.0.1 3493 > LISTEN 192.168.36.106 3493 > naknight at nak-server:~$ sudo upsd -DDDD > Network UPS Tools upsd 2.4.3 > 0.000000 listen_add: added 127.0.0.1:3493 > 0.000093 listen_add: added 192.168.36.106:3495 > 0.000224 setuptcp: try to bind to 192.168.36.106 port 3495 > 0.000428 setuptcp: bind: Cannot assign requested address > 0.000455 not listening on 192.168.36.106 port 3495 > naknight at nak-server:~$Same issue as here? http://article.gmane.org/gmane.comp.monitoring.nut.user/6644
Yes, thank you. Problem solved! On 09/29/2011 06:44 PM, Charles Lepple wrote:> On Sep 29, 2011, at 5:45 PM, Neil Knight wrote: > >> O.S. Ubuntu 10.10, Maverick Meerkat 32 bit. >> NUT 2.4.3-1ubuntu5, package installed >> Belkin F6C1500-TW-RK >> >> I am having trouble starting uspd whenever I add a client from my lan >> to uspd.conf: >> LISTEN 127.0.0.1 3493 >> LISTEN 192.168.36.106 3493 >> naknight at nak-server:~$ sudo upsd -DDDD >> Network UPS Tools upsd 2.4.3 >> 0.000000 listen_add: added 127.0.0.1:3493 >> 0.000093 listen_add: added 192.168.36.106:3495 >> 0.000224 setuptcp: try to bind to 192.168.36.106 port 3495 >> 0.000428 setuptcp: bind: Cannot assign requested address >> 0.000455 not listening on 192.168.36.106 port 3495 >> naknight at nak-server:~$ > > Same issue as here? > > http://article.gmane.org/gmane.comp.monitoring.nut.user/6644