Hi All, I'm trying to communication with the HP r3000 XR UP using the latest stable build and I'm getting the following errors. Can anyone enlighten me with the errors below and what other course of action I can take. Thanks in advance. Paul. [root@WRRFtpServer etc]# /usr/local/ups/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools - BCMXCP UPS driver 0.11 (2.0.5) Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS re-established Connected to UPS on /dev/ttyS0 baudrate: 19200 Communications with UPS lost: Receive error (Request command): 9!!! Communications with UPS lost: Receive error (Request command): 9!!! Communications with UPS lost: Receive error (Request command): 9!!! Communications with UPS lost: Error executing command Could not communicate with the ups Driver failed to start (exit status=1) -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.412 / Virus Database: 268.18.5/706 - Release Date: 28/02/2007 -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20070301/1279c501/attachment.html
Hi All, I'm trying to communication with the HP r3000 XR UP using the latest stable build and I'm getting the following errors. Can anyone enlighten me with the errors below and what other course of action I can take. Thanks in advance. Paul. [root@WRRFtpServer etc]# /usr/local/ups/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools - BCMXCP UPS driver 0.11 (2.0.5) Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS lost: Error executing command Communications with UPS re-established Connected to UPS on /dev/ttyS0 baudrate: 19200 Communications with UPS lost: Receive error (Request command): 9!!! Communications with UPS lost: Receive error (Request command): 9!!! Communications with UPS lost: Receive error (Request command): 9!!! Communications with UPS lost: Error executing command Could not communicate with the ups Driver failed to start (exit status=1) -- No virus found in this outgoing message. Checked by AVG Free Edition. Version: 7.1.412 / Virus Database: 268.18.5/706 - Release Date: 28/02/2007 ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.
Hi Paul. Yes this is a bugg entered into the stable release. It was noticed after the 2.0.5 release by Henning Brauer. If you would apply the attached patch it would fix this. Just gunzip it and place it in the nut source directory and do a patch -p1 < bcmxcp.patch Now build and try it out. Regards Kjell Claesson tor 2007-03-01 klockan 09:37 +1100 skrev Paul Battaglia:> Hi All, > > I'm trying to communication with the HP r3000 XR UP using the latest > stable build and I'm getting the following errors. Can anyone > enlighten me with the errors below and what other course of action I > can take. > > Thanks in advance. > Paul. > > > > [root@WRRFtpServer etc]# /usr/local/ups/bin/upsdrvctl start > Network UPS Tools - UPS driver controller 2.0.5 > Network UPS Tools - BCMXCP UPS driver 0.11 (2.0.5) > > Communications with UPS lost: Error executing command > Communications with UPS lost: Error executing command > Communications with UPS lost: Error executing command > Communications with UPS lost: Error executing command > Communications with UPS re-established > Connected to UPS on /dev/ttyS0 baudrate: 19200 > Communications with UPS lost: Receive error (Request command): 9!!! > > Communications with UPS lost: Receive error (Request command): 9!!! > > Communications with UPS lost: Receive error (Request command): 9!!! > > Communications with UPS lost: Error executing command > Could not communicate with the ups > Driver failed to start (exit status=1) > > > -- > No virus found in this outgoing message. > Checked by AVG Free Edition. > Version: 7.1.412 / Virus Database: 268.18.5/706 - Release Date: > 28/02/2007 > > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser@lists.alioth.debian.org > http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser-------------- next part -------------- A non-text attachment was scrubbed... Name: bcmxcp.patch.gz Type: application/x-gzip Size: 1250 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20070301/08f03410/bcmxcp.patch-0001.bin