similar to: Problem with HP R3000 XR

Hi, So far I've gleaned heaps of useful info from the list and got mostly running with NUT. There was a thread by Paul Battaglia and Kjell Claesson about the R3000 which has helped me get so far, but now with the patched driver I still have this on startup: # /usr/local/ups/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools - BCMXCP UPS driver 0.11

Hi Matthijs, > Arnaud. >After some trial and error, i found out that the HP R3000 XR ups's we have >can be used with Network Ups Tools. >This using the bcmxcp driver. > >Note that in the code of this driver (line 1420) , the Baudrate is fixed to >9600 baud. >to connect to a serial HP R3000 XR ups one needs to change this to 19200 >baud. > >ideally, this should

I have setup nut-2.4.1 with the bcmxcp driver for my HP R3000 XR unit and although it appears to work, I receive the following sorts of errors in syslog: Aug 27 10:33:05 sv18 bcmxcp[6373]: Communications with UPS lost: Receive error (data): got 0 bytes instead of 64!!! Aug 27 10:33:15 sv18 bcmxcp[6373]: Communications with UPS lost: Receive error (data): got 0 bytes instead of 64!!! Aug 27

UPS: HP R3000 XR with HP UPS Management Module What I Want: I just want the UPS to shut down the client called "tor" before the UPS power drains out, I'd prefer to use a direct serial cable instead of network, in case the network doesn't work. I'll manage the UPS trough the ethernet using the built-in HTTP webinterface in the HP UPS Management Module. I've created a

Hi I have a HP R3000 XR UPS which NUT never says is at 100% battery. It seems stuck in 98 or 99 . something percentage. How accurate should i expect the reports to be? All my other UPSes has been and is at 100%, even those i have retired. My monitor system runs debian. The host that is physically connected to this ups runs: nut 2.2.2-6.4 The web script runs nut-cgi 2.0.4-4 JonB

On 08/07/2013 02:02 PM, Bendtsen, Jon wrote: > On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: > >> Hi there, >> >> OS: (L)ubuntu 12.04 precise LTS >> Nut: 2.6.3-1ubuntu1.1 >> Installation Method: Package (apt-get install nut) >> Hardware: HP R1500 G3 INT > > FYI: > I have a different UPS, a HP R3000 XR and I monitor

Greetings, I've just installed nut-2.4.1 on a Solaris 10 x86 machine to monitor a HP R3000XR UPS. SunOS babylon4 5.10 Generic_138889-08 i86pc i386 i86pc Solaris First of all, I encountered a single problem during the build. After configuring, drivers/Makefile ends up containing the following line: LIBNETSNMP_LDFLAGS = -R../lib -L/usr/sfw/lib -lnetsnmp -lgen [...] This is clearly

On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: > Hi there, > > OS: (L)ubuntu 12.04 precise LTS > Nut: 2.6.3-1ubuntu1.1 > Installation Method: Package (apt-get install nut) > Hardware: HP R1500 G3 INT FYI: I have a different UPS, a HP R3000 XR and I monitor it using serial and the bcmxcp driver. [R3000XR] port = /dev/ttyUSB0 driver =

Network UPS Tools version 2.0.5 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.0/nut-2.0.5.tar.gz - News: http://www.networkupstools.org/source/2.0/new-2.0.5.txt - ChangeLog: http://www.networkupstools.org/source/2.0/ChangeLog

Network UPS Tools version 2.0.5 has been released. http://www.networkupstools.org/ Direct access: - Download: http://www.networkupstools.org/source/2.0/nut-2.0.5.tar.gz - News: http://www.networkupstools.org/source/2.0/new-2.0.5.txt - ChangeLog: http://www.networkupstools.org/source/2.0/ChangeLog

On 08/08/2013, at 18.58, Alf H?gemark <alf at i100.no> wrote: > On 08/07/2013 02:02 PM, Bendtsen, Jon wrote: >> On 07/08/2013, at 13.40, Jan Phillip Greimann <jg at softjury.de> wrote: >> >>> Hi there, >>> >>> OS: (L)ubuntu 12.04 precise LTS >>> Nut: 2.6.3-1ubuntu1.1 >>> Installation Method: Package (apt-get install nut)

Hi Michael, I've forwarded your patch to Kjell, who's maintaining the bcmxcp driver, and to the nut development list. Kjell and others have more knowledges of the xcp protocol and will be able to analyze your patch. 2008/1/4, michalwd1979 <michalwd1979 at o2.pl>: > Hello Arnaud, > I am sending You a small patch to bcmxcp.c and bcmxcp.h files from nut-2.2.0. I written this

Hello, Does anyone here happen to have a copy of the firmware for this UPS? Any links on the HPE website I could find (pointing to the old HP) are long dead. Thanks! Marek

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 - -----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi! Has anyone gotten it working at all with Linux :) I picked one up for thiry bucks and would love to monitor it! Liz - -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) iD8DBQFD/5fEIACpLcG4dhwRAmeCAJ9+8FGXqKoOlZdkw/KFXb9n0PEemwCdHaoD NVnv7JjmBAjNsExK6WzAdnA= =pcPX - -----END PGP

hello everyone, I've been testing the NUT solution as opposed to the undocumented LanSafe application to control my Eaton UPS. I am on a Slackware 13.37 system with a 2.6.37.6 kernel. NUT version is 2.4.3 . I installed the tarball by compiling it directly on my system (as a slackbuild package). The UPS is an Eaton Powerware 9155, but I don't know how to obtain the manufacturing date. The

=?ISO-8859-1?Q?Alf_H=F8gemark?= <alf at i100.no> writes: > I am working on improving the bcmxcp driver, to add more data reported > from the driver, and also add support for sending more commands to the ups. > The code changes are currently not part of any release, but they are in > github, and some more are on the way. > Would you be able to do some testing on your HP R3000

Hi All, I put my Compaq R3000 UPS on NUT. Every once in a while the battery alarm light turns on, on the front of the UPS. Maybe once every couple of days or so. When that happens I get the following output in /var/log/messages: Sep 22 01:51:46 mail upscode2[90734]: Unknown response to UPDS: .20 MOUL1 Sep 22 01:51:46 mail upscode2[90734]: Unknown response to UPDS: 0119.20 MOIL1 Sep 22

All, I have a fairly old Compaq R3000h which is overdue for new batteries. Before I go and splash out a few hundred francs, I'd just need a quick sanity check - when I disconnect the power (UPS under load), it cuts out pretty much right away, so the batteries are flat (even though the charge indicator says full). When I reconnect the power, the surge triggers a 16A mains fuse. This sounds

Additional question: I noticed on the HP Website that the latest version of "CPQPOWER.MIB" (1.76, dated Sept. 19, 2013) was more recent than the related file (./drivers/compaq-mib.c) in the NUT driver. Is the MIB structure as implemented on the management card perhaps no longer in line with the NUT driver ? The latest MIB file can be downloaded from the following URL:

Hi, I have an HP R5500XR and a Compaq R3000XR that I would like to use with nut. I searched the compatibility lists and the mail list archives but couldn't find anything. They both have 9 pin serial ports. Can anyone give me any information about them, and if they are supported by nut? Thanks, Denny Fox