search for: r3000

Hi Matthijs, > Arnaud. >After some trial and error, i found out that the HP R3000 XR ups's we have >can be used with Network Ups Tools. >This using the bcmxcp driver. > >Note that in the code of this driver (line 1420) , the Baudrate is fixed to >9600 baud. >to connect to a serial HP R3000 XR ups one needs to change this to 19200 >baud. > >ideally,...

Hi All, I put my Compaq R3000 UPS on NUT. Every once in a while the battery alarm light turns on, on the front of the UPS. Maybe once every couple of days or so. When that happens I get the following output in /var/log/messages: Sep 22 01:51:46 mail upscode2[90734]: Unknown response to UPDS: .20 MOUL1 Sep 22 01:51:46 ma...

Hi, So far I've gleaned heaps of useful info from the list and got mostly running with NUT. There was a thread by Paul Battaglia and Kjell Claesson about the R3000 which has helped me get so far, but now with the patched driver I still have this on startup: # /usr/local/ups/bin/upsdrvctl start Network UPS Tools - UPS driver controller 2.0.5 Network UPS Tools - BCMXCP UPS driver 0.11 (2.0.5) Communications with UPS lost: Error executing command Communication...

...If I understand it correctly, Clang knows what 'mips1' and 'mips5' are - but can't generate code for it? Why is it like that? I actually have a more in general questions about processors... If this is the wrong place for it, please ignore it, I'm just a bit confused. So the R3000 is a "MIPS CPU"? What does that actually mean? Is the architecture MIPS? Or the producer? When I go to Wikipedia I see MIPS as the designer, so I take it is like saying "Intel CPU" or "AMD CPU" but that does not tell me anything about the assembly instruction it uses,...

Hi there. I need some advise on how to configure NUT, if it is possible to do it. My UPS, a Compaq R3000 has three individual power segments. I want NUT to: When mains is interrupted. Shut down all serves immediately. When all servers are completely down, in sequence with time delay shut down two of the power segments. When batteries is about to be depleted shut down itself and the last power segmen...

Hi I have a HP R3000 XR UPS which NUT never says is at 100% battery. It seems stuck in 98 or 99 . something percentage. How accurate should i expect the reports to be? All my other UPSes has been and is at 100%, even those i have retired. My monitor system runs debian. The host that is physically connected to thi...

Hi All, I'm trying to communication with the HP r3000 XR UP using the latest stable build and I'm getting the following errors. Can anyone enlighten me with the errors below and what other course of action I can take. Thanks in advance. Paul. [root@WRRFtpServer etc]# /usr/local/ups/bin/upsdrvctl start Network UPS Tools - UPS driver control...

Hello list, I recently loaded CentOS 4.2 x86_64 on a Compaq R3000 laptop and then fully updated to 4.3. The battery applet on other installs always just showed up and worked, not so here. It is not in the applet choices at all, it is available here on my desktop. I suspect it is something simple I'm missing but I need a point in the right direction. I did try...

...What is the difference?) then x86-64. So I wanted to know, which are supported and how do I tell Clang do use a different target? To give even more background: I used an old development environment, which provided compiler for the old Playstation CPU - Wikipedia says it is a "32-bit RISC MIPS R3000A-compatible MIPS R3051" (I simply thought it is a R3000). And I started to wonder, how do I know if Clang supports that old CPU? So I ran my llvm-config with --targets-built and got: AArch64 AMDGPU ARM BPF Hexagon Lanai Mips MSP430 NVPTX PowerPC RISCV Sparc SystemZ WebAssembly X86 XCore I se...

Hello list, I've installed NUT on an HP blade server, and I try to get it communicating via SNMP with 2 HP R3000 UPSes, each fitted with a AF465A management card. To do this, I used the snmp-ups driver, and configured it for the "cpqpower" MIB. Communication with the UPSes is established. My problem is that both UPSes constantly return the "OL OB" status which, in addition to being nonsen...

UPS: HP R3000 XR with HP UPS Management Module What I Want: I just want the UPS to shut down the client called "tor" before the UPS power drains out, I'd prefer to use a direct serial cable instead of network, in case the network doesn't work. I'll manage the UPS trough the ethernet using...

All, I have a fairly old Compaq R3000h which is overdue for new batteries. Before I go and splash out a few hundred francs, I'd just need a quick sanity check - when I disconnect the power (UPS under load), it cuts out pretty much right away, so the batteries are flat (even though the charge indicator says full). When I reconnec...

Hello, Does anyone here happen to have a copy of the firmware for this UPS? Any links on the HPE website I could find (pointing to the old HP) are long dead. Thanks! Marek

Hello all, Does anyone know where I could turn to find out how to set up the NVIDIA driver to work properly on my Compaq Presario R3000? Thanks in advance, Phil

I have setup nut-2.4.1 with the bcmxcp driver for my HP R3000 XR unit and although it appears to work, I receive the following sorts of errors in syslog: Aug 27 10:33:05 sv18 bcmxcp[6373]: Communications with UPS lost: Receive error (data): got 0 bytes instead of 64!!! Aug 27 10:33:15 sv18 bcmxcp[6373]: Communications with UPS lost: Receive error (data): got...

...Phillip Greimann <jg at softjury.de> wrote: > >> Hi there, >> >> OS: (L)ubuntu 12.04 precise LTS >> Nut: 2.6.3-1ubuntu1.1 >> Installation Method: Package (apt-get install nut) >> Hardware: HP R1500 G3 INT > > FYI: > I have a different UPS, a HP R3000 XR and I monitor it using serial and the bcmxcp driver. > > [R3000XR] > port = /dev/ttyUSB0 > driver = bcmxcp > > > > > _______________________________________________ > Nut-upsuser mailing list > Nut-upsuser at lists.alioth.debian.org > http://lists.alioth...

...t.tpst=bd9b6997fbc7fc515f4cf4626f5c8d01&ac.admitted=1393496865122.876444892.492883150> TIA Cheers. Bye. Ph. A. On 27/02/14 11:06, Philippe Andersson wrote: > Hello list, > > I've installed NUT on an HP blade server, and I try to get it > communicating via SNMP with 2 HP R3000 UPSes, each fitted with a AF465A > management card. To do this, I used the snmp-ups driver, and configured > it for the "cpqpower" MIB. Communication with the UPSes is established. > > My problem is that both UPSes constantly return the "OL OB" status > which, in...

Hi! Have a similar issue with one of our customers having HP R12000/3 UPS with AF430A card. Upsmon shows the UPS as Online, on Battery and Battery discharging at the same time: [root at smrsrvslv06 lib64]# upsc hpups at localhost ambient.temperature: 19.0 ambient.temperature.high: 0.00 ambient.temperature.low: 0.00 battery.charge: 94.00 battery.current: 0.00 battery.runtime: 4620.00

On Sat, Jul 22, 2017 at 7:48 AM, Charles Lepple <clepple at gmail.com> wrote: > > I also have not used a Synology device, but as I recall, they generally > expect to be the NUT master system. This may cause problems if you need to > do something fancy with upssched. > The Synology boxes work fine as NUT clients, *however* they provide very little ability to configure NUT

...496865122.876444892.492883150> > > TIA > > Cheers. Bye. > > Ph. A. > > > On 27/02/14 11:06, Philippe Andersson wrote: >> Hello list, >> >> I've installed NUT on an HP blade server, and I try to get it >> communicating via SNMP with 2 HP R3000 UPSes, each fitted with a AF465A >> management card. To do this, I used the snmp-ups driver, and configured >> it for the "cpqpower" MIB. Communication with the UPSes is established. >> >> My problem is that both UPSes constantly return the "OL OB" status...