Nut upsuser - Feb 2007 - 64bits bug? (was: my ups shuts down when starting upsd)

2007/2/19, Glen Ogilvie
<nelg@linuxsolutions.co.nz>:
> Hi,
>
> I have a Fenton Powerpal L660, when I try and configure nut with either the
> metatec or fentonups driver, and start upsd, the UPS instantly turns itself
> off.
>
> It used to work, until I changed my motherboard and CPU, which means it has
> a different bios and serial port setup.
>
> This is happening with Nut 2.0.1 and also Nut 2.0.5.   I have an AMD64 bit
> processor, Mandriva 2007 64 bit.
>
> Any suggestions as to what I should do to investigate this?
>
> The error I got from the fenton drive was:
> Short read during UPS id sequence
I wonder if were not facing a 64b bugs?!
can you make another test with nut 2.0.5 + megatec + same ups on a 32
bits system, and report back.

Any developer with a 64b setup to report back?

Arnaud
-- 
Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt
Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/
Debian Developer - http://people.debian.org/~aquette/
OpenSource Developer - http://arnaud.quette.free.fr/

Arnaud Quette wrote:
> 
> 2007/2/19, Glen Ogilvie <nelg@linuxsolutions.co.nz>:
> > Hi,
> >
> > I have a Fenton Powerpal L660, when I try and configure nut with
either the
> > metatec or fentonups driver, and start upsd, the UPS instantly turns
itself
> > off.
> >
> > It used to work, until I changed my motherboard and CPU, which means
it has
> > a different bios and serial port setup.
> >
> > This is happening with Nut 2.0.1 and also Nut 2.0.5.   I have an AMD64
bit
> > processor, Mandriva 2007 64 bit.
> >
> > Any suggestions as to what I should do to investigate this?
> >
> > The error I got from the fenton drive was:
> > Short read during UPS id sequence
> 
> I wonder if were not facing a 64b bugs?!
> can you make another test with nut 2.0.5 + megatec + same ups on a 32
> bits system, and report back.
> 
> Any developer with a 64b setup to report back?
I've run NUT on a 64-bit (AMD) Linux system without problems. I have
only run the newhidups/usbhid-ups driver though. -- Peter