search for: powerpal

...*** fentonups.h 2005-07-20 12:45:41.000000000 +0200 --- /usr/src/redhat/BUILD/nut-2.0.3/drivers/fentonups.h 2006-07-24 14:28:18.000000000 +0200 *************** *** 30,71 **** int highnorm; int highxfer; int has_temp; } modeltab[] = { /* USA models */ ! { "L280A", "PowerPal 280", 9.6, 2.4, 12.1, 1.7, 84, 98, 126, 142, 0 }, ! { "L425A", "PowerPal 425", 9.6, 2.4, 12.1, 1.7, 84, 98, 126, 142, 0 }, ! { "L660A", "PowerPal 660", 19.6, 4.4, 24.2, 3.3, 84, 98, 126, 142, 0 }, ! { "L1000A", "PowerPal 1000&qu...

...ossible with "contact closure " UPS's that "nut" software can perform this? So again after the log entry .......... "Executing automatic power-fail shutdown" Can the proccess be canced by a "power restored alert" like log entry ... "UPS powerpal at localhost on line power" that is offered before "Executing automatic power-fail shutdown" and it seems that after log entry "Host 127.0.0.1 disconnected (read failure)" there is no "turning back". Why does "batt low" cause this "Auto log...

Hi There, i have a strange problem with a fenton powerpal 660. When you switch off the power to the UPS (from the wall), the server (IBM xSeries 203) attached to it dies...However, if you unplug the cable from the server to the UPS and plug it back in again (with the power still out to the UPS), the server starts up again (set to power up after a powe...

Hi there Would anybody happen to know the correct driver for a Fenton Powerpal S series? upsdrvctl reports: Network UPS Tools - UPS driver controller 1.2.2 Network UPS Tools - Fenton UPS driver 0.90 (1.2.2) Unknown ups - please report this ID string: #FENTON S Series V4.04EG503 Detected Unknown Series on /dev/ttyS0 Alternatively, does anyone know if the manufa...

...x1 upsd[4858]: Startup successful Oct 15 14:28:47 mx1 upsmon[4860]: Startup successful Oct 15 14:28:47 mx1 upsd[4858]: Connection from 127.0.0.1 Here is the output of /sbin/upsdrvctl start: Network UPS Tools - UPS driver controller 2.0.1 Network UPS Tools - Fenton UPS driver 1.22 (2.0.1) Detected PowerPal 1400RE on /dev/ttyS0 So its seeing the UPS, but then reporting as unsupported... WTF? Any ideas on what todo here? Thanks Simon

Hi, I have a Fenton Powerpal L660, when I try and configure nut with either the metatec or fentonups driver, and start upsd, the UPS instantly turns itself off. It used to work, until I changed my motherboard and CPU, which means it has a different bios and serial port setup. This is happening with Nut 2.0.1 and also Nut 2.0...

Gidday all - I'm a new user to nut. I've got some cheap powerpal UPSs working fairly well. However I also have a new Dynamix UPS-1700D and an old Powercom KIN-1700 something unit that I cannot make work right. The best method I've found is "trial and error" which sounds a bit last-resort. Is there any better way to find out what protocol is used...

Hi all... I've tested my installation and everything seems OK, but I'll note a couple of things. System is debian, UPS is Fenton Powerpal 660 L First of all, the ups software did not restart because I had not changed 'no' to 'yes' in /etc/default/nut. Maybe it's a debian thing, I don't know. But I don't remember seeing it noted anywhere in nut docs. Second... Regarding the ups shutdown during system sh...

2007/2/19, Glen Ogilvie <nelg@linuxsolutions.co.nz>: > Hi, > > I have a Fenton Powerpal L660, when I try and configure nut with either the > metatec or fentonups driver, and start upsd, the UPS instantly turns itself > off. > > It used to work, until I changed my motherboard and CPU, which means it has > a different bios and serial port setup. > > This is happenin...

Hi everybody, following UPS is successfuly tested. Model: FSP Champ Tower 1k https://www.fsp-europe.com/CS/champ-tower-series-1k2k3k/ lsusb: Bus 002 Device 004: ID 0665:5161 Cypress Semiconductor USB to Serial ups.conf: [powerpal]     driver = blazer_usb     port = /dev/hidraw0 Mode = standalone Distro = CentOS 8 What I did to get UPS communicate. In terminal run as root: ln -s /lib/udev/rules.d/62-nut-usbups.rules /etc/udev/rules.d/ udevadm control --reload-rules udevadm trigger output upsc: Init SSL without certi...

2007/2/19, Glen Ogilvie <nelg@linuxsolutions.co.nz>: > Hi, > > I have a Fenton Powerpal L660, when I try and configure nut with either the > metatec or fentonups driver, and start upsd, the UPS instantly turns itself > off. > > It used to work, until I changed my motherboard and CPU, which means it has > a different bios and serial port setup. > > This is happenin...

...quot;, raw); - /* manufacturer */ - rtrim(&temp[1], ' '); - dstate_setinfo("ups.mfr", &temp[1], 0, 0); + temp[11] = 0; + temp[27] = 0; - /* L660A = PowerPal (L) @ 660 VA, American (A) version (115V) */ + /* manufacturer */ + rtrim(&temp[1], ' '); + dstate_setinfo("ups.mfr", &temp[1], 0, 0); - /* grab full model strin...

Description: Replace many usleep and some sleep calls with nanosleep. usleep is stated in its manual page as removed by POSIX. Contrary to its predecessors, nanosleep semantics is well defined. The replacement, which is mostly in drivers, is untested. Supplements http://bugs.debian.org/633791. Last-Update: Sat, 13 Aug 2011 14:04:48 +0300 Index:

I am sorry if this is an FAQ, but there doesn't seem to be searchable archives, and the supported manufacturer's list doesn't include "surge master". Google was also not much help. I have just put a Linux box and the customer has a "surge max " UPS. Anyone any ideas what protocol it uses? There is a Green serial cable. The manufacturers web site is here:

Hey there, I got a new UPS (CyberPower PR1500LCDRTXL2Ua) and found the serial drivers don't quite work... So I decided to jump in and make changes to the driver that would hopefully make it happier. I have it working (I really only changed powerp-txt.c) but still have a couple questions... Charles said I should mention them here to talk to anyone interest but specifically Arjen (one of

Hi all, I attached a driver for MiniBox openUPS device ( http://www.mini-box.com/OpenUPS) and a dump of the hid usages. I had the possibility to make a few adjustments to the device firmware for HID usages, and although I haven't managed to produce a good structure many issues from previous firmware were at least fixed and new information added. ATM the driver only shows pertaining

...I could do a run a script that cancels the shutdown. ... with " shutdown -c" . But there is no alert as to AC power being restored. Pulling power before "LOW BATTERY" there is an alert. IE from /var/log/syslog ............. Aug 21 12:12:05 roj-desktop upsmon[18721]: UPS powerpal at localhost on line power But after LOW BATTERY is detected there is NO such alert. thx Any comments greatly appreciated. Roger Salisbury roger at pchelp2u.com.au 75 Mawson Pde Chifley Sydney NSW 2036 0296618811 mob 0400339007 Interfacing a Contact-Closure UPS to Mac OS X and Lin...

On Jan 19, 2016, at 9:37 AM, Ben Kamen <ben at benkamen.net> wrote: > > Hey there, > > I got a new UPS (CyberPower PR1500LCDRTXL2Ua) and found the serial drivers don't quite work... [...] > Essentially, I rewrote powpan_status so it better tolerates strings of different lengths (although I only have the 1 UPS right now, so I can't test against another and different

Dear all, Further to my previous message I now made a one-line convencience function to export your currently active graphics window/plot to either Word or Powerpoint in Office-native vector-based DrawingML format using either export2ppt(file="plot.pptx") or export2doc(file="plot.docx") : see

...he appearance of the # variable to the outside world (and NUT calculations), internally # in the UPS the original value is used. # # Anything else is passed through to the hardware-specific part of # the driver. # # Examples # -------- # # A simple example for a UPS called "powerpal" that uses the blazer_ser # driver on /dev/ttyS0 is: # # [powerpal] # driver = blazer_ser # port = /dev/ttyS0 # desc = "Web server" # # If your UPS driver requires additional settings, you can specify them # here. For example, if it supports a setting of "1234" for t...