similar to: PowerMust 500

Disclaimer: I've setup APC UPS monitoring and it works... ... but when it comes to mustek powermust 600usb (connected via com-port), I can't make it work. Got NUT installed via aptitude in ubuntu feisty and a basic setup, exactly the same as for the apc, except for the name of the ups and the corresponding section of ups.conf -- [mustek] driver = megatec port = /dev/ttyS1

Arnaud Quette wrote: > Anyhow, I would more see this as a merge of all these drivers, with > some autodetection or flag/param to switch the mfr/model and maybe > capabilities... Whatever the driver name is, a good thing would be the > name of the protocol or something generic enough, though powermust is > fine. Ok, I made some minor changes to powermust, to make it less

Hi, a few days ago, I bought some of those Mustek UPSes that have both a serial and a USB connector. Currently only the serial port is supported by the megatec driver. This works fine so far. Now I have seen there is a megatec_usb driver, which currently only supports 2 other UPSes. How can I help to find out whether the PowerMust might actually work with the megatec_usb driver? -- Regards,

Hello, fisrt, you should subscribe to the NUT user mailing list to get a good support, since I've personaly no knowledges about such units: http://lists.alioth.debian.org/mailman/listinfo/nut-upsuser Next, you should try the latest nut release (2.0.5 currently, but 2.2.0 soon) and most of all the new megatec driver. 2007/6/10, esva2 at inbox.lv <esva2 at inbox.lv>: > Dear

Hello, We are using the equipment "MUSTEK PowerMust 3000 NetGuard RM". That is using Megatec protocol. But unfortunately not all the data can be viewed correctly when dumping from utility "upsc". For example: upsbox# upsc mustek at localhost battery.voltage: 108.00 battery.voltage.nominal: 96.0 driver.name: megatec driver.parameter.pollinterval: 2 driver.parameter.port:

System: Cenots Linux 6.9 Application: nut-2.7.5-0.20170613gitb1314c6 [with usb 0.1 from distro] Device: Mustek PowerMust 1060 LCD Comunication log file: dump.txt We are looking at the possibility of successful communicating with this device UPS Mustek PowerMust 1060 LCD. PS: wolfy on the list gives me assistance and i can install any new compiled nut version from sources. Thanks, Catalin.

Hello ! first off, thank you all for making this piece of software. from what i have seen so far this seems to be a really mature and advanced tool for all sorts of UPS models ! I`d like to tell that I own a UPS which isn`t listed on the compatibility list, but seems to be compatible. It is a PowerWalker - see this at

Hello ! first off, thank you all for making this piece of software. from what i have seen so far this seems to be a really mature and advanced tool for all sorts of UPS models ! I`d like to tell that I own a UPS which isn`t listed on the compatibility list, but seems to be compatible. It is a PowerWalker - see this at

Hi! I am trying to install subj, on my Bubba miniserver, that runs Debian. I am stoped now with driver test: upsdrvctl start Network UPS Tools - UPS driver controller 2.0.4 Network UPS Tools - Megatec protocol driver 1.4 (2.0.4) Carlos Rodrigues (c) 2003-2006 Unable to open : No such file or directory Things to try: - Check 'port=' in ups.conf - Check owner/permissions of all

Hi Stefanos, you should mail to the NUT list, and try the megatec driver, which is only available from subversion for the moment (but should be included in the next stable release). Carlos might give you some help with this driver. Arnaud Quette -- Linux / Unix Expert - MGE UPS SYSTEMS - R&D Dpt Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org/ Debian Developer -

So, I have this Mustek Powermust 600USB (no serial port) here temporarily. It seems to be a hid device. The output from "lsusb -v" and "newhidups -DDDDD" (with "generic" and "vendorid=06da") are (respectively): ----------------------------------------------------------------------------------------------- Bus 001 Device 002: ID 06da:0003 Phoenixtec Power

Hi all, I'm thinking buying a UPS Mustek PowerMust 600 USB to shutdown a Linux box on case of power failure. Can I use nut with this UPS without problems? I checked the page http://www.vamos-wentworth.org/upsinfo.html and was only something (incomplete) about Powermust 400 (information from November 2005). Could this be already changed? Thanks in advance.

Hi, I'm having a hard time configuring a Mustek Powermust 600VA ups to work via USB with nut. I read somewhere that nut works OK via the rs232 cable, but unfortunately I don't have a COM port in my computer. The kernel detects the ups as an Xbox pad :) and loads the xpad module. I tried running /lib/nut/megatec with different /dev/ttySx but it displays megatec protocol UPS was not

A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 188 bytes Desc: not available Url : http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20071124/3ceb35d2/attachment.pgp

Hello, first of all I'd like to thank all the NUT developers for their gorgeous work and for their efforts to make NUT the best and most complete UPS management software I've ever seen (seriously). Secondarily I'd like to help the NUT project as far as my help is needed, I'm not a programmer (by now...) but I would like to help somehow anyway. I have 3 UPS from the same

An HTML attachment was scrubbed... URL: http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20090120/ffb91e55/attachment.htm

On Feb 11, 2008 5:30 PM, Marcio Gomes <mpg at microlink.com.br> wrote: > I change the if in [OFF] detect state to, in original way, if you send a > reset.watchdog, the UPS goes > to OFF state in clients, but it is not correct, because UPS is OL and > Shutdown are in progress, but > the power is not OFF First of all, thanks for the patch. But I have a few comments: Are you

On 10/30/2017 03:19 PM, Alexa Catalin wrote: > System: Cenots Linux 6.9 > Application: nut-2.7.5-0.20170613gitb1314c6? [with usb 0.1 from distro] > Device:??Mustek PowerMust 1060 LCD > Comunication log file: dump.txt > > We are looking at the possibility of successful communicating with > this device UPS?Mustek PowerMust 1060 LCD. > > PS: wolfy on the list gives me

On 2/27/07, Markus Layr <tuxian@yahoo.de> wrote: > do you now if there is a possibility to get an connection betwenn nut an > the Mustek PowerMust 2000VA via USB? > I tried if with newhidups but I always got "No matching HID UPS found". In the latest development version of NUT there's a new driver called "megatec_usb" that may support your UPS. If it

Hi Vitaly, 2009/2/26 Vitaly Polyakov <var at fapu.ru> > Hello. > > You are the site administrator Project Network UPS Tools, are not you? I > think? it is a good idea to add information about the compatibility the > NUT with a Mustek PowerMust 424/636/848 USB. These UPS are using > modified protocol, and therefore the old driver megatec_usb is not > suitable and the