Nut upsdev - Sep 2018 - [HCL] Cyber Power Systems CP600LCD supported by usbhid-ups

Cyber Power Systems CP600LCD
https://www.cyberpowersystems.com/product/ups/cp600lcd/

upsc output:
battery.charge: 100
battery.charge.low: 10
battery.charge.warning: 20
battery.mfr.date: CPS
battery.runtime: 2220
battery.runtime.low: 300
battery.type: PbAcid
battery.voltage: 13.5
battery.voltage.nominal: 12
device.mfr: CPS
device.model: UPS CP600
device.type: ups
driver.name: usbhid-ups
driver.parameter.pollfreq: 30
driver.parameter.pollinterval: 5
driver.parameter.port: auto
driver.version: DSM6-2-23656-180331
driver.version.data: CyberPower HID 0.3
driver.version.internal: 0.38
input.transfer.high: 140
input.transfer.low: 100
input.voltage: 120.0
input.voltage.nominal: 120
output.voltage: 120.0
ups.beeper.status: enabled
ups.delay.shutdown: 20
ups.delay.start: 30
ups.load: 22
ups.mfr: CPS
ups.model: UPS CP600
ups.productid: 0501
ups.realpower.nominal: 340
ups.status: OL
ups.test.result: Done and passed
ups.timer.shutdown: -60
ups.timer.start: 0
ups.vendorid: 0764

I have not yet completed the shutdown sequence test yet, but I suspect that
it will also be affected by the Cyber Power System offdelay/ondelay bug.

Cheers,
X


-- 
Xavier Landreville
--------------------------
MagnaX Software
(613) 454-5829
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://alioth-lists.debian.net/pipermail/nut-upsdev/attachments/20180926/2eb25dcf/attachment.html>

On Sep 26, 2018, at 12:39 AM, Landreville, Xavier <xavier.l at magnax.ca>
wrote:
> 
> I have not yet completed the shutdown sequence test yet, but I suspect that
it will also be affected by the Cyber Power System offdelay/ondelay bug.
> 
Have you had a chance to test the shutdown yet?

Are you referring to this bug? https://github.com/networkupstools/nut/issues/432

Also, do you happen to know which version of NUT is in the NAS firmware?