Nut upsdev - Jan 2016 - [HCL] NHS Laser Senoidal 5000VA supported by gamatronic

Device Manufacturer: NHS 
Device Name: Laser Senoidal 5000VA 

upsc output when the UPS is in normal condition: 

battery.charge: 100 
battery.current: 0.4 
battery.date: 12292015 
battery.runtime: 00000 
battery.runtime.low: 59940 
battery.temperature: 00 
battery.voltage: 163.4 
device.mfr: NHS Sistemas de Energia 
device.model: Laser Senoidal 5000VA 
device.type: ups 
driver.name: gamatronic 
driver.parameter.pollinterval: 20 
driver.parameter.port: /dev/ttyACM2 
driver.version: 2.6.3 
driver.version.internal: 0.02 
input.frequency: 59.9 
input.transfer.high: 144 
input.transfer.low: 096 
input.voltage: 127.6 
input.voltage.nominal: 120 
output.current: 0.0 
output.frequency: 60.0 
output.voltage: 119.1 
ups.firmware: LSPWM(15).55 
ups.id: ny7bd8723tbecabc 
ups.load: 000 
ups.mfr: NHS Sistemas de Energia 
ups.model: Laser Senoidal 5000VA 
ups.power.nominal: 05000 
ups.status: OL 



Below the "upsc" command when the UPS is on battery without input
(input bad):


battery.charge: 100 
battery.current: 0.0 
battery.date: 12292015 
battery.runtime: 00076 
battery.runtime.low: 59940 
battery.temperature: 00 
battery.voltage: 155.9 
device.mfr: NHS Sistemas de Energia 
device.model: Laser Senoidal 5000VA 
device.type: ups 
driver.name: gamatronic 
driver.parameter.pollinterval: 20 
driver.parameter.port: /dev/ttyACM2 
driver.version: 2.6.3 
driver.version.internal: 0.02 
input.frequency: 0.0 
input.transfer.high: 144 
input.transfer.low: 096 
input.voltage: 0.0 
input.voltage.nominal: 120 
output.current: 0.0 
output.frequency: 60.0 
output.voltage: 119.7 
ups.alarm: Input Bad 
ups.firmware: LSPWM(15).55 
ups.id: ny7bd8723tbecabc 
ups.load: 000 
ups.mfr: NHS Sistemas de Energia 
ups.model: Laser Senoidal 5000VA 
ups.power.nominal: 05000 
ups.status: ALARM OB 




I've tested and the shutdown occours when??????? ups.status? it's?
equal? OB LB
Best Regards. 
----------------------------------------------------------- 
Thiago Wiezbicki 
NHS Sistemas de Energia 
Av. Juscelino Kubitschek de Oliveira, 5270 
Cidade Industrial - Curitiba - PR 
Fone/Fax: +55 41 2141-9262 
http://www.nhs.com.br 

-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20151229/7c272faf/attachment.html>

This is the same as https://github.com/networkupstools/nut/issues/254 , right?

(It's on my TODO list. DDL updates take a little longer than HCL updates.)

Other comments below.
> On Dec 29, 2015, at 1:55 PM, Thiago Wiezbicki - NHS <thiago.wiezbicki at
nhs.com.br> wrote:
> 
> Device Manufacturer: NHS
> Device Name: Laser Senoidal 5000VA
> 
> upsc output when the UPS is in normal condition:
> 
> battery.charge: 100
> battery.current: 0.4
> battery.date: 12292015
> battery.runtime: 00000
Does battery.runtime only get updated when on battery power, or is this with a
different load?
> battery.runtime.low: 59940
> battery.temperature: 00
Is this fixed at 0, or is there a temperature option?
> battery.voltage: 163.4
> device.mfr: NHS Sistemas de Energia
> device.model: Laser Senoidal 5000VA
> device.type: ups
> driver.name: gamatronic
> driver.parameter.pollinterval: 20
> driver.parameter.port: /dev/ttyACM2
> driver.version: 2.6.3
> driver.version.internal: 0.02
> input.frequency: 59.9
> input.transfer.high: 144
> input.transfer.low: 096
> input.voltage: 127.6
> input.voltage.nominal: 120
> output.current: 0.0
> output.frequency: 60.0
> output.voltage: 119.1
> ups.firmware: LSPWM(15).55
> ups.id: ny7bd8723tbecabc
> ups.load: 000
> ups.mfr: NHS Sistemas de Energia
> ups.model: Laser Senoidal 5000VA
> ups.power.nominal: 05000
> ups.status: OL
> 
> 
> 
> Below the "upsc" command when the UPS is on battery without input
(input bad):
> 
> 
> battery.charge: 100
> battery.current: 0.0
> battery.date: 12292015
> battery.runtime: 00076
> battery.runtime.low: 59940
This seems rather high. This variable is supposed to represent the runtime [in
seconds] below which the UPS will signal "LB", but this capture only
shows "OB".
> battery.temperature: 00
> battery.voltage: 155.9
> device.mfr: NHS Sistemas de Energia
> device.model: Laser Senoidal 5000VA
> device.type: ups
> driver.name: gamatronic
> driver.parameter.pollinterval: 20
> driver.parameter.port: /dev/ttyACM2
> driver.version: 2.6.3
> driver.version.internal: 0.02
> input.frequency: 0.0
> input.transfer.high: 144
> input.transfer.low: 096
> input.voltage: 0.0
> input.voltage.nominal: 120
> output.current: 0.0
> output.frequency: 60.0
> output.voltage: 119.7
> ups.alarm: Input Bad 
> ups.firmware: LSPWM(15).55
> ups.id: ny7bd8723tbecabc
> ups.load: 000
> ups.mfr: NHS Sistemas de Energia
> ups.model: Laser Senoidal 5000VA
> ups.power.nominal: 05000
> ups.status: ALARM OB
> 
> 
> 
> 
> I've tested and the shutdown occours when        ups.status  it's 
equal  OB LB
Thanks for testing.

-- 
Charles Lepple
clepple at gmail

Below the answers:
> This is the same as https://github.com/networkupstools/nut/issues/254 ,
right?
Yes, this UPS is the same.
> Does battery.runtime only get updated when on battery power, or is this
with a different load?
> battery.runtime.low: 59940
> battery.temperature: 00
Yes, this time time is updated on battery power, This is a dynamic counter that
changes with a different load.
> Is this fixed at 0, or is there a temperature option?
In this case, this UPS doesn't have a temperature sensor, therefore this
value is equal zero.
> battery.voltage: 163.4
> device.mfr: NHS Sistemas de Energia
> device.model: Laser Senoidal 5000VA
> device.type: ups
> driver.name: gamatronic
> driver.parameter.pollinterval: 20
> driver.parameter.port: /dev/ttyACM2
> driver.version: 2.6.3
> driver.version.internal: 0.02
> input.frequency: 59.9
> input.transfer.high: 144
> input.transfer.low: 096
> input.voltage: 127.6
> input.voltage.nominal: 120
> output.current: 0.0
> output.frequency: 60.0
> output.voltage: 119.1
> ups.firmware: LSPWM(15).55
> ups.id: ny7bd8723tbecabc
> ups.load: 000
> ups.mfr: NHS Sistemas de Energia
> ups.model: Laser Senoidal 5000VA
> ups.power.nominal: 05000
> ups.status: OL
> 
> 
> 
> Below the "upsc" command when the UPS is on battery without input
(input bad):
> 
> 
> battery.charge: 100
> battery.current: 0.0
> battery.date: 12292015
> battery.runtime: 00076
> battery.runtime.low: 59940
> This seems rather high. This variable is supposed to represent the runtime
[in seconds] below which the UPS will signal "LB", but this capture
only shows "OB".
> battery.temperature: 00
> battery.voltage: 155.9
> device.mfr: NHS Sistemas de Energia
> device.model: Laser Senoidal 5000VA
> device.type: ups
> driver.name: gamatronic
> driver.parameter.pollinterval: 20
> driver.parameter.port: /dev/ttyACM2
> driver.version: 2.6.3
> driver.version.internal: 0.02
> input.frequency: 0.0
> input.transfer.high: 144
> input.transfer.low: 096
> input.voltage: 0.0
> input.voltage.nominal: 120
> output.current: 0.0
> output.frequency: 60.0
> output.voltage: 119.7
> ups.alarm: Input Bad 
> ups.firmware: LSPWM(15).55
> ups.id: ny7bd8723tbecabc
> ups.load: 000
> ups.mfr: NHS Sistemas de Energia
> ups.model: Laser Senoidal 5000VA
> ups.power.nominal: 05000
> ups.status: ALARM OB
This value is high because we don't have a load in the output of the UPS,
therefore, with this load the time until the UPS achieve the low battery status
is 59940 seconds.

Best Regards.
----------------------------------------------------------- 
Thiago Wiezbicki 
NHS Sistemas de Energia 
Av. Juscelino Kubitschek de Oliveira, 5270 
Cidade Industrial - Curitiba - PR 
Fone/Fax: +55 41 2141-9262 
http://www.nhs.com.br