Nut upsdev - Oct 2012 - Eaton , Powerare 9120 6kva

Are there driver to this device it works? I trie with 9130 and 9140 driver
but didn't work.


Thanks

Ignacio Fridemberg
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20121025/af016ac1/attachment.html>

torsdagen den 25 oktober 2012 22.15.56 skrev  Ignacio Fridemberg:

Hi Ignacio,
> Are there driver to this device it works? I trie with 9130 and 9140 driver
> but didn't work.
> 
What is the type of connection ? (USB Serial)
How old is it ? 

For USB you should try 'bcmxcp-usb' driver.
Older 9120 talk upscode, so if serial it could be 'upscode2'

Regards
Kjell Claesson

m?ndagen den 29 oktober 2012 08.09.15 skrev  Ignacio Fridemberg:
OK,
> Kjell : thanks for the answer. another one,  which configuration is for
>  port =? do you recomend me   with usb port ?
> 
You set it to:

port = auto

Make sure that the port you connect the ups to, is chown'ed to the
right owner.

This should be handled by udev. But I have seen some dist's that
had some problem with this. 

Regards
Kjell Claesson

El 08/11/2012 19:57, "Ignacio Fridemberg" <ignacio_Fridemberg at
hotmail.com>
escribi?:
>
> root at pc-688:~# upsc powerare at localhost:3493
> ambient.temperature: 15
> ambient.temperature.high: 40
> battery.charge: 95
> battery.runtime: 1287
> battery.voltage: 277.0
> device.mfr: Eaton
> device.model: PW9120 6000i
> device.serial: RY354A0089
> device.type: ups
> driver.name: bcmxcp_usb
> driver.parameter.pollinterval: 2
> driver.parameter.port: /dev/usbmon2/002/002
> driver.version: 2.6.3
> driver.version.internal: 0.25
> input.frequency: 49.9
> input.frequency.high: 52
> input.frequency.low: 48
> input.frequency.nominal: 50
> input.transfer.boost.high: 187
> input.transfer.high: 276
> input.transfer.low: 160
> input.transfer.trim.low: 242
> input.voltage: 218
> input.voltage.nominal: 220
> output.current:  7.0
> output.current.nominal: 27.0
> output.frequency: 49.9
> output.phases: 1
> output.voltage: 220
> output.voltage.nominal: 220
> ups.beeper.status: enabled
> ups.firmware: Cont:05.50 Inve:05.50
> ups.load:  25.0
> ups.mfr: Eaton
> ups.model: PW9120 6000i
> ups.power: 1501
> ups.power.nominal: 6000
> ups.serial: RY354A0089
> ups.status: OL
>
>
> 2012/11/8 Arnaud Quette <aquette.dev at gmail.com>
>
>> Hi Ignacio
>>
>> 2012/11/7 Ignacio Fridemberg <ignacio_Fridemberg at hotmail.com>
>>
>>> the trouble with usb port was resolved,
>>
>>
>> great!
>>
>>
>>> but it have emerged another problem, I tried get graph from nut
server
>>> to cacti server, i used a template in this pages
>>> http://www.eric-a-hall.com/software/cacti-nut/ , but the template
is
>>> wrong,the asociated data source of power input does't work, and
temperature
>>> neither , Does anybody know if this problem is result?
>>
>>
>> could you please post back your upsc output
>> you should also contact cacti-nut author for specific support.
>>
>> cheers,
>> Arnaud
>> --
>> Network UPS Tools (NUT) Project Leader - http://www.networkupstools.org
>> Debian Developer - http://www.debian.org
>> Free Software Developer - http://arnaud.quette.fr
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20121108/b13a2ccf/attachment.html>