Hi Jonathan and Charles,
yes, the Tripp-Lite HID subdriver was under development. I started it
based on the debug output posted by somebody on this list a few weeks
ago, but then I either didn't get the information I needed, or got too
busy to act on it.
That driver is still incomplete, in the sense that there are many
unmapped device variables.
Jonathan, if you run this driver, could you use "upsc" to print out
the states of the various variables? Also observe how they change over
time as you plug/unplug the power, initiate battery tests, etc.
Perhaps you can figure out the meaning of some of the variables
starting with "UPS.*", which are the ones I haven't yet mapped.
For
example, one of them might be the system load that you were looking
for.
Some of the instant commands have been implemented, and may/may not be
working. You could test the behavior of
test.battery.start.quick
test.battery.start.deep
test.battery.stop
load.off
shutdown.return
shutdown.stop
beeper.on
beeper.off
and let me know if they do anything sensible. Note: only run these
tests if nothing important is plugged into the UPS, as it might cut
power. Also, beeper.on and beeper.off might not do anything unless
there is an "alarm condition" (such as low battery).
The most important variable to look out for is ups.status, as this is
what upsmon uses to figure out if/when to shutdown the system. You may
test that it shows OL (which the UPS is on line), OB (when it is on
battery), or LB (when the battery is low).
-- Peter
Charles Lepple wrote:>
> Peter,
>
> any objections to enabling the Tripp-Lite HID subdriver?
>
> ---------- Forwarded message ----------
> From: Jonathan Freedman <jef@pleiades.ca>
> Date: Dec 15, 2005 1:20 AM
> Subject: Re: [Nut-upsdev] Fun with TrippLite
> To: Charles Lepple <clepple@gmail.com>
>
>
> Hey
>
> So yeah. Instead of sleeping I decided to get this working. As you
> mentioned, there appears to be a subdriver for the tripplite in existence.
> However it was not enabled. That part was easy... I simply added a "
> &tripplite_subdriver" on line 42 and a "#include
"tripplite-hid.h" on line
> 34 with the rest of the includes.
>
> It works; and the nagios plugin works; and I am happy. The only catch is
> it doesn't seem to give the current load; but it didn't do that
under
> windows either so I can live with it.
>
> Cheers
>
> Jonathan Freedman
> Vice President
> Pleiades Consulting
> (902) 444-4335 x400
>
>
> --
> - Charles Lepple
>
