Susan Horwitz
2012-Nov-03 23:34 UTC
[LLVMdev] problem trying to write an LLVM register-allocation pass
Lang -
Your version does NOT work for me (i.e., I still get an error from the
assembler when I run your code on my tst.c) unless I force compilation
and assembly for a 32-bit X86 machine:
llc -march=x86 -regalloc=gc tst.bc
gcc -m32 tst.s
My machine is a 64-bit machine. Maybe you are working with a different
architecture and that's why it worked for you?
I would be happy if the above worked in general, but when I try other C
code (with my "real" register allocator, not the naive one I sent you)
I
get assembly that includes
%r8d
which seems to be invalid for a 32-bit machine. Sigh. It looks to me
like there's a problem with the LLVM-3.1 API for register allocation
and/or the code-generation phase. What do you think?
Susan
On 11/1/2012 5:28 PM, Lang Hames wrote:> Hi Susan,
>
> Without debugging symbols I can't make much out of that stack trace
> I'm afraid.
>
> I've attached my modified version of Gcra.cpp. I built llvm 3.1 by
> dropping this file into lib/CodeGen, and adding references to
> createGcra to include/lib/CodeGen/Passes.h and
> include/lib/CodeGen/LinkAllCodeGenComponents.h. (If you search for
> createRegAllocPBQP you'll see where to add the declarations).
>
> With that setup, running your allocator on the tst.c file you attached
> previously yielded a sane assembly file.
>
> Cheers,
> Lang.
>
> On Thu, Nov 1, 2012 at 3:13 PM, Susan Horwitz <horwitz at cs.wisc.edu
> <mailto:horwitz at cs.wisc.edu>> wrote:
>
> I still get a coredump:
>
> 0 libLLVM-3.1.so <http://libLLVM-3.1.so> 0x00007f0158a4e67f
> 1 libLLVM-3.1.so <http://libLLVM-3.1.so> 0x00007f0158a500ca
> 2 libpthread.so.0 0x0000003a86c0f500
> 3 libLLVM-3.1.so <http://libLLVM-3.1.so> 0x00007f01583c346c
> 4 libLLVM-3.1.so <http://libLLVM-3.1.so> 0x00007f0158546349
> llvm::FPPassManager::runOnFunction(llvm::Function&) + 521
> 5 libLLVM-3.1.so <http://libLLVM-3.1.so> 0x00007f01585463e3
> llvm::FPPassManager::runOnModule(llvm::Module&) + 51
> 6 libLLVM-3.1.so <http://libLLVM-3.1.so> 0x00007f0158545fae
> llvm::MPPassManager::runOnModule(llvm::Module&) + 462
> 7 libLLVM-3.1.so <http://libLLVM-3.1.so> 0x00007f01585460bd
> llvm::PassManagerImpl::run(llvm::Module&) + 125
> 8 llc 0x000000000040b012 main + 5218
> 9 libc.so.6 0x0000003a8601ecdd __libc_start_main + 253
> 10 llc 0x0000000000407d79
> Stack dump:
> 0. Program arguments: llc -load Debug/lib/P4.so -regalloc=gc
> tst.bc
> 1. Running pass 'Function Pass Manager' on module
'tst.bc'.
> 2. Running pass 'Machine Loop Invariant Code Motion' on
> function '@main'
> make: *** [tst.reg] Segmentation fault (core dumped)
>
>
>
> On 11/01/2012 04:59 PM, Lang Hames wrote:
>
> Hi Susan,
>
> Sorry - I had missed that you're using llvm-3.1, rather than
the
> development branch. We encourage people to live on top-of-tree
> - it's
> well tested, easier for active developers to offer help with, and
> keeping up with incremental changes is often easier than
> porting between
> stable versions.
>
> It also sounds like you were building a Release version of
> LLVM. That
> will not have any asserts enabled (though it will have some other
> diagnostics). You will probably want to work with a Debug+Asserts
> version (<src>/configure --disable-optimized
> --enable-assertions) while
> you're developing your allocator and watch for any asserts
> that trigger.
>
> In your case the Assertion that is triggering in PEI indicates
> that the
> MachineRegisterInfo object still contained some virtregs post
> register-allocation. You need to call MRI->clearVirtRegs() at
> the end of
> your allocator.
>
> Hope this helps!
>
> Cheers,
> Lang.
>
> On Thu, Nov 1, 2012 at 2:41 PM, Susan Horwitz
> <horwitz at cs.wisc.edu <mailto:horwitz at cs.wisc.edu>
> <mailto:horwitz at cs.wisc.edu <mailto:horwitz at
cs.wisc.edu>>> wrote:
>
> Hi again Lang,
>
> I decided to try the approach you proposed to see whether
> it makes
> the assembly-code problem go away. Again, I tried a very
> simple
> register allocator (attached) that just calls
> vrm.assignVirt2Phys
> for every vreg in each function, mapping the vreg to the
> first preg
> in the register class. I tried two versions: one maps
> *every* vreg,
> and the other only maps those for which
> MRI->reg_empty(vreg) returns
> false. In both cases I get a core dump somewhere after my
> reg-allocation pass has run (when I use the "tst.c"
file
> that I sent
> last time as input).
>
> Note also that there is no VirtRegMap.h in the
"include"
> directory
> of my installed llvm-3.1. I had to copy that file from
> the source
> directory. That seems suspicious.
>
> Any thoughts?
>
> Thanks!
>
> Susan
>
>
> On 10/31/2012 07:51 PM, Lang Hames wrote:
>
> Hi Susan,
>
> I'm having trouble reproducing that error on my end,
> but I think the
> problem is probably that you're not using the
> VirtRegRewriter
> infrastructure. What your allocator needs to do is
> populate the
> virtual
> register mapping (VirtRegMap pass) with your
> allocation, rather than
> rewriting the registers directly through
> MachineRegisterInfo.
>
> Have your allocator require and preserve the
> VirtRegMap pass,
> then in
> your runOnMachineFunction pass grab a reference to the
> pass with:
>
> VirtRegMap &vrm = getAnalysis<VirtRegMap>();
>
> You can then describe your register allocations with:
>
> vrm.assignVirt2Phys(<virtreg>, <physreg>)
>
> The VirtRegRewriter pass (in VirtRegMap.cpp) will run
> after your
> allocator and apply the mapping that you described in the
> VirtRegMap.
>
> I hope this helps. Let me know if it doesn't fix your
> issue.
>
> Cheers,
> Lang.
>
> On Wed, Oct 31, 2012 at 3:54 PM, Susan Horwitz
> <horwitz at cs.wisc.edu <mailto:horwitz at
cs.wisc.edu>
> <mailto:horwitz at cs.wisc.edu <mailto:horwitz at
cs.wisc.edu>>
> <mailto:horwitz at cs.wisc.edu
> <mailto:horwitz at cs.wisc.edu> <mailto:horwitz at
cs.wisc.edu
> <mailto:horwitz at cs.wisc.edu>>>> wrote:
>
> Thanks Lang!
>
> Here's another question: I'm trying to process
> this input:
>
> int main() {
> return 0;
> }
>
> but I'm getting an error
> Assertion `!Fn.getRegInfo(). getNumVirtRegs()
&&
> "Regalloc must
>
> assign all vregs"' failed.
>
> At the start of runOnMachineFunction I call
> Fn.getRegInfo().
> getNumVirtRegs();
> and find that there is 1 virtual register. However,
> MRI->reg_empty(vreg)
> tells me that it is not used or defined. So my
> register-allocation
> code never sees it, and thus can't allocate a
> preg for it.
> I tried
> using MRI->replaceRegWith(vreg, preg);
> (where preg is available to vreg's register
> class) but that
> didn't
> work. When I look, the number of vregs in the
> function is
> still 1.
>
> Can you help with this?
>
> Thanks again!
>
> Susan
>
>
> On 10/31/2012 04:55 PM, Lang Hames wrote:
>
> Hi Susan,
>
> The meaning of "addRequired(X)" is that
your
> pass needs
> X to be
> run, and
> for X to be preserved by all passes that run
> after X
> and before your
> pass. The PHIElemination and
> TwoAddressInstruction
> passes do not
> preserve each other, hence there's no way for
> the pass
> manager to
> schedule them for you if you addRequire(...)
> them.
>
> The trick is that CodeGen will schedule both
> of these
> passes to
> be run
> before _any_ register allocation pass (see
> Passes.cpp),
> so you
> needn't
> require them explicitly - you can just assume
> they have
> been
> run. If you
> just remove those lines from your
> getAnalysisUsage
> method your pass
> should now run as you expect.
>
> Cheers,
> Lang.
>
> On Wed, Oct 31, 2012 at 1:46 PM, Susan Horwitz
> <horwitz at cs.wisc.edu <mailto:horwitz at
cs.wisc.edu>
> <mailto:horwitz at cs.wisc.edu <mailto:horwitz at
cs.wisc.edu>>
> <mailto:horwitz at cs.wisc.edu
> <mailto:horwitz at cs.wisc.edu> <mailto:horwitz at
cs.wisc.edu
> <mailto:horwitz at cs.wisc.edu>>>
> <mailto:horwitz at cs.wisc.edu
> <mailto:horwitz at cs.wisc.edu> <mailto:horwitz at
cs.wisc.edu
> <mailto:horwitz at cs.wisc.edu>>
> <mailto:horwitz at cs.wisc.edu
> <mailto:horwitz at cs.wisc.edu> <mailto:horwitz at
cs.wisc.edu
> <mailto:horwitz at cs.wisc.edu>>>>> wrote:
>
> I'm trying to write a
> MachineFunctionPass to do
> register
> allocation.
> I have code that worked with an old
> version of
> LLVM. It
> does not
> work with llvm-3.1. (or various other
> versions
> that I've
> tried).
>
> The first problem is that including this
> line:
>
> AU.addRequiredID(__
> TwoAddressInstructionPassID);
>
>
> in method getAnalysisUsage causes a
> runtime error:
>
> Unable to schedule 'Eliminate PHI nodes
> for register
> allocation'
> required by 'Unnamed pass: implement
> Pass::getPassName()'
> Unable to schedule pass
> UNREACHABLE executed at ...
>
> I'm invoking the pass like this (given
> input file
> foo.c):
>
> clang -emit-llvm -O0 -c foo.c -o foo.bc
> opt -mem2reg foo.bc > foo.ssa
> mv foo.ssa foo.bc
> llc -load Debug/lib/P4.so -regalloc=gc
> foo.bc
>
>
> I've attached my entire file (it's
very
> short).
> Any help
> would be
> much appreciated!
>
> Susan Horwitz
>
> ______________________________
> _________________
> LLVM Developers mailing list
> LLVMdev at cs.uiuc.edu <mailto:LLVMdev at cs.uiuc.edu>
> <mailto:LLVMdev at cs.uiuc.edu <mailto:LLVMdev at
cs.uiuc.edu>>
> <mailto:LLVMdev at cs.uiuc.edu
> <mailto:LLVMdev at cs.uiuc.edu> <mailto:LLVMdev at
cs.uiuc.edu
> <mailto:LLVMdev at cs.uiuc.edu>>>
> <mailto:LLVMdev at cs.uiuc.edu
> <mailto:LLVMdev at cs.uiuc.edu> <mailto:LLVMdev at
cs.uiuc.edu
> <mailto:LLVMdev at cs.uiuc.edu>>
> <mailto:LLVMdev at cs.uiuc.edu
> <mailto:LLVMdev at cs.uiuc.edu> <mailto:LLVMdev at
cs.uiuc.edu
> <mailto:LLVMdev at cs.uiuc.edu>>>>
>
> http://llvm.cs.uiuc.edu
> http://lists.cs.uiuc.edu/ mailman/listinfo/llvmdev
> <http://lists.cs.uiuc.edu/__mailman/listinfo/llvmdev
>
<http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev>>
>
>
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20121103/352f4008/attachment.html>
Lang Hames
2012-Nov-04 21:27 UTC
[LLVMdev] problem trying to write an LLVM register-allocation pass
Hi Susan, I tested the version of Gcra.cpp that I sent you on x86-64 systems running MacOS 10.8 and Ubuntu 12.04 (Linux 3.2.0). Could you send me the bitcode file you're compiling? Different bitcodes (due to different clang versions or applied optimizations) could account for the different results we're seeing. For reference I've attached the *.ll file that I have tested with, which was compiled from your tst.c file with: clang -O0 -emit-llvm -S -o tst.ll tst.c My clang version was built from a recent checkout from subversion. It's unlikely that there is any fundamental problem with the register allocation APIs or the code generator that would prevent you from building a working allocator. The APIs certainly could have changed in a way that would break existing allocators though. - Lang. On Sat, Nov 3, 2012 at 4:34 PM, Susan Horwitz <horwitz at cs.wisc.edu> wrote:> Lang - > > Your version does NOT work for me (i.e., I still get an error from the > assembler when I run your code on my tst.c) unless I force compilation and > assembly for a 32-bit X86 machine: > > llc -march=x86 -regalloc=gc tst.bc > gcc -m32 tst.s > > My machine is a 64-bit machine. Maybe you are working with a different > architecture and that's why it worked for you? > > I would be happy if the above worked in general, but when I try other C > code (with my "real" register allocator, not the naive one I sent you) I > get assembly that includes > > %r8d > > which seems to be invalid for a 32-bit machine. Sigh. It looks to me > like there's a problem with the LLVM-3.1 API for register allocation and/or > the code-generation phase. What do you think? > > Susan > > > On 11/1/2012 5:28 PM, Lang Hames wrote: > > Hi Susan, > > Without debugging symbols I can't make much out of that stack trace I'm > afraid. > > I've attached my modified version of Gcra.cpp. I built llvm 3.1 by > dropping this file into lib/CodeGen, and adding references to createGcra to > include/lib/CodeGen/Passes.h and > include/lib/CodeGen/LinkAllCodeGenComponents.h. (If you search for > createRegAllocPBQP you'll see where to add the declarations). > > With that setup, running your allocator on the tst.c file you attached > previously yielded a sane assembly file. > > Cheers, > Lang. > > On Thu, Nov 1, 2012 at 3:13 PM, Susan Horwitz <horwitz at cs.wisc.edu> wrote: > >> I still get a coredump: >> >> 0 libLLVM-3.1.so 0x00007f0158a4e67f >> 1 libLLVM-3.1.so 0x00007f0158a500ca >> 2 libpthread.so.0 0x0000003a86c0f500 >> 3 libLLVM-3.1.so 0x00007f01583c346c >> 4 libLLVM-3.1.so 0x00007f0158546349 >> llvm::FPPassManager::runOnFunction(llvm::Function&) + 521 >> 5 libLLVM-3.1.so 0x00007f01585463e3 >> llvm::FPPassManager::runOnModule(llvm::Module&) + 51 >> 6 libLLVM-3.1.so 0x00007f0158545fae >> llvm::MPPassManager::runOnModule(llvm::Module&) + 462 >> 7 libLLVM-3.1.so 0x00007f01585460bd >> llvm::PassManagerImpl::run(llvm::Module&) + 125 >> 8 llc 0x000000000040b012 main + 5218 >> 9 libc.so.6 0x0000003a8601ecdd __libc_start_main + 253 >> 10 llc 0x0000000000407d79 >> Stack dump: >> 0. Program arguments: llc -load Debug/lib/P4.so -regalloc=gc tst.bc >> 1. Running pass 'Function Pass Manager' on module 'tst.bc'. >> 2. Running pass 'Machine Loop Invariant Code Motion' on function >> '@main' >> make: *** [tst.reg] Segmentation fault (core dumped) >> >> >> >> On 11/01/2012 04:59 PM, Lang Hames wrote: >> >>> Hi Susan, >>> >>> Sorry - I had missed that you're using llvm-3.1, rather than the >>> development branch. We encourage people to live on top-of-tree - it's >>> well tested, easier for active developers to offer help with, and >>> keeping up with incremental changes is often easier than porting between >>> stable versions. >>> >>> It also sounds like you were building a Release version of LLVM. That >>> will not have any asserts enabled (though it will have some other >>> diagnostics). You will probably want to work with a Debug+Asserts >>> version (<src>/configure --disable-optimized --enable-assertions) while >>> you're developing your allocator and watch for any asserts that trigger. >>> >>> In your case the Assertion that is triggering in PEI indicates that the >>> MachineRegisterInfo object still contained some virtregs post >>> register-allocation. You need to call MRI->clearVirtRegs() at the end of >>> your allocator. >>> >>> Hope this helps! >>> >>> Cheers, >>> Lang. >>> >>> On Thu, Nov 1, 2012 at 2:41 PM, Susan Horwitz <horwitz at cs.wisc.edu >>> <mailto:horwitz at cs.wisc.edu>> wrote: >>> >>> Hi again Lang, >>> >>> I decided to try the approach you proposed to see whether it makes >>> the assembly-code problem go away. Again, I tried a very simple >>> register allocator (attached) that just calls vrm.assignVirt2Phys >>> for every vreg in each function, mapping the vreg to the first preg >>> in the register class. I tried two versions: one maps *every* vreg, >>> and the other only maps those for which MRI->reg_empty(vreg) returns >>> false. In both cases I get a core dump somewhere after my >>> reg-allocation pass has run (when I use the "tst.c" file that I sent >>> last time as input). >>> >>> Note also that there is no VirtRegMap.h in the "include" directory >>> of my installed llvm-3.1. I had to copy that file from the source >>> directory. That seems suspicious. >>> >>> Any thoughts? >>> >>> Thanks! >>> >>> Susan >>> >>> >>> On 10/31/2012 07:51 PM, Lang Hames wrote: >>> >>> Hi Susan, >>> >>> I'm having trouble reproducing that error on my end, but I think >>> the >>> problem is probably that you're not using the VirtRegRewriter >>> infrastructure. What your allocator needs to do is populate the >>> virtual >>> register mapping (VirtRegMap pass) with your allocation, rather >>> than >>> rewriting the registers directly through MachineRegisterInfo. >>> >>> Have your allocator require and preserve the VirtRegMap pass, >>> then in >>> your runOnMachineFunction pass grab a reference to the pass with: >>> >>> VirtRegMap &vrm = getAnalysis<VirtRegMap>(); >>> >>> You can then describe your register allocations with: >>> >>> vrm.assignVirt2Phys(<virtreg>, <physreg>) >>> >>> The VirtRegRewriter pass (in VirtRegMap.cpp) will run after your >>> allocator and apply the mapping that you described in the >>> VirtRegMap. >>> >>> I hope this helps. Let me know if it doesn't fix your issue. >>> >>> Cheers, >>> Lang. >>> >>> On Wed, Oct 31, 2012 at 3:54 PM, Susan Horwitz >>> <horwitz at cs.wisc.edu <mailto:horwitz at cs.wisc.edu> >>> <mailto:horwitz at cs.wisc.edu <mailto:horwitz at cs.wisc.edu>>> >>> wrote: >>> >>> Thanks Lang! >>> >>> Here's another question: I'm trying to process this input: >>> >>> int main() { >>> return 0; >>> } >>> >>> but I'm getting an error >>> Assertion `!Fn.getRegInfo(). getNumVirtRegs() && >>> "Regalloc must >>> >>> assign all vregs"' failed. >>> >>> At the start of runOnMachineFunction I call Fn.getRegInfo(). >>> getNumVirtRegs(); >>> and find that there is 1 virtual register. However, >>> MRI->reg_empty(vreg) >>> tells me that it is not used or defined. So my >>> register-allocation >>> code never sees it, and thus can't allocate a preg for it. >>> I tried >>> using MRI->replaceRegWith(vreg, preg); >>> (where preg is available to vreg's register class) but that >>> didn't >>> work. When I look, the number of vregs in the function is >>> still 1. >>> >>> Can you help with this? >>> >>> Thanks again! >>> >>> Susan >>> >>> >>> On 10/31/2012 04:55 PM, Lang Hames wrote: >>> >>> Hi Susan, >>> >>> The meaning of "addRequired(X)" is that your pass needs >>> X to be >>> run, and >>> for X to be preserved by all passes that run after X >>> and before your >>> pass. The PHIElemination and TwoAddressInstruction >>> passes do not >>> preserve each other, hence there's no way for the pass >>> manager to >>> schedule them for you if you addRequire(...) them. >>> >>> The trick is that CodeGen will schedule both of these >>> passes to >>> be run >>> before _any_ register allocation pass (see Passes.cpp), >>> so you >>> needn't >>> require them explicitly - you can just assume they have >>> been >>> run. If you >>> just remove those lines from your getAnalysisUsage >>> method your pass >>> should now run as you expect. >>> >>> Cheers, >>> Lang. >>> >>> On Wed, Oct 31, 2012 at 1:46 PM, Susan Horwitz >>> <horwitz at cs.wisc.edu <mailto:horwitz at cs.wisc.edu> >>> <mailto:horwitz at cs.wisc.edu <mailto:horwitz at cs.wisc.edu>> >>> <mailto:horwitz at cs.wisc.edu <mailto:horwitz at cs.wisc.edu> >>> <mailto:horwitz at cs.wisc.edu <mailto:horwitz at cs.wisc.edu>>>> >>> wrote: >>> >>> I'm trying to write a MachineFunctionPass to do >>> register >>> allocation. >>> I have code that worked with an old version of >>> LLVM. It >>> does not >>> work with llvm-3.1. (or various other versions >>> that I've >>> tried). >>> >>> The first problem is that including this line: >>> >>> AU.addRequiredID(__ TwoAddressInstructionPassID); >>> >>> >>> in method getAnalysisUsage causes a runtime error: >>> >>> Unable to schedule 'Eliminate PHI nodes for >>> register >>> allocation' >>> required by 'Unnamed pass: implement >>> Pass::getPassName()' >>> Unable to schedule pass >>> UNREACHABLE executed at ... >>> >>> I'm invoking the pass like this (given input file >>> foo.c): >>> >>> clang -emit-llvm -O0 -c foo.c -o foo.bc >>> opt -mem2reg foo.bc > foo.ssa >>> mv foo.ssa foo.bc >>> llc -load Debug/lib/P4.so -regalloc=gc foo.bc >>> >>> >>> I've attached my entire file (it's very short). >>> Any help >>> would be >>> much appreciated! >>> >>> Susan Horwitz >>> >>> ______________________________ _________________ >>> LLVM Developers mailing list >>> LLVMdev at cs.uiuc.edu <mailto:LLVMdev at cs.uiuc.edu> >>> <mailto:LLVMdev at cs.uiuc.edu <mailto:LLVMdev at cs.uiuc.edu>> >>> <mailto:LLVMdev at cs.uiuc.edu <mailto:LLVMdev at cs.uiuc.edu> >>> <mailto:LLVMdev at cs.uiuc.edu <mailto:LLVMdev at cs.uiuc.edu>>> >>> >>> http://llvm.cs.uiuc.edu >>> http://lists.cs.uiuc.edu/ mailman/listinfo/llvmdev >>> <http://lists.cs.uiuc.edu/__mailman/listinfo/llvmdev >>> <http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev>> >>> >>> >>> >>> >>> >>> >>> >> > >-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20121104/6c8b08a7/attachment.html> -------------- next part -------------- A non-text attachment was scrubbed... Name: tst.ll Type: application/octet-stream Size: 642 bytes Desc: not available URL: <http://lists.llvm.org/pipermail/llvm-dev/attachments/20121104/6c8b08a7/attachment.obj>
Susan Horwitz
2012-Nov-04 22:08 UTC
[LLVMdev] problem trying to write an LLVM register-allocation pass
My tst.bc is attached. I had to use ssh to copy it from my office
machine to my home laptop. In case that corrupts it, I also put a copy
here:
http://pages.cs.wisc.edu/~horwitz/LANG/tst.bc
I created the file like this:
clang -emit-llvm -O0 -c tst.c -o tst.bc
opt -mem2reg tst.bc > tst.mem2reg
mv tst.mem2reg tst.bc
Susan
On 11/4/2012 3:27 PM, Lang Hames wrote:> Hi Susan,
>
> I tested the version of Gcra.cpp that I sent you on x86-64 systems
> running MacOS 10.8 and Ubuntu 12.04 (Linux 3.2.0).
>
> Could you send me the bitcode file you're compiling? Different
> bitcodes (due to different clang versions or applied optimizations)
> could account for the different results we're seeing. For reference
> I've attached the *.ll file that I have tested with, which was
> compiled from your tst.c file with:
>
> clang -O0 -emit-llvm -S -o tst.ll tst.c
>
> My clang version was built from a recent checkout from subversion.
>
> It's unlikely that there is any fundamental problem with the register
> allocation APIs or the code generator that would prevent you from
> building a working allocator. The APIs certainly could have changed in
> a way that would break existing allocators though.
>
> - Lang.
>
>
> On Sat, Nov 3, 2012 at 4:34 PM, Susan Horwitz <horwitz at cs.wisc.edu
> <mailto:horwitz at cs.wisc.edu>> wrote:
>
> Lang -
>
> Your version does NOT work for me (i.e., I still get an error from
> the assembler when I run your code on my tst.c) unless I force
> compilation and assembly for a 32-bit X86 machine:
>
> llc -march=x86 -regalloc=gc tst.bc
> gcc -m32 tst.s
>
> My machine is a 64-bit machine. Maybe you are working with a
> different architecture and that's why it worked for you?
>
> I would be happy if the above worked in general, but when I try
> other C code (with my "real" register allocator, not the
naive one
> I sent you) I get assembly that includes
>
> %r8d
>
> which seems to be invalid for a 32-bit machine. Sigh. It looks to
> me like there's a problem with the LLVM-3.1 API for register
> allocation and/or the code-generation phase. What do you think?
>
> Susan
>
>
> On 11/1/2012 5:28 PM, Lang Hames wrote:
>> Hi Susan,
>>
>> Without debugging symbols I can't make much out of that stack
>> trace I'm afraid.
>>
>> I've attached my modified version of Gcra.cpp. I built llvm 3.1
>> by dropping this file into lib/CodeGen, and adding references to
>> createGcra to include/lib/CodeGen/Passes.h and
>> include/lib/CodeGen/LinkAllCodeGenComponents.h. (If you search
>> for createRegAllocPBQP you'll see where to add the
declarations).
>>
>> With that setup, running your allocator on the tst.c file you
>> attached previously yielded a sane assembly file.
>>
>> Cheers,
>> Lang.
>>
>> On Thu, Nov 1, 2012 at 3:13 PM, Susan Horwitz
>> <horwitz at cs.wisc.edu <mailto:horwitz at
cs.wisc.edu>> wrote:
>>
>> I still get a coredump:
>>
>> 0 libLLVM-3.1.so <http://libLLVM-3.1.so>
0x00007f0158a4e67f
>> 1 libLLVM-3.1.so <http://libLLVM-3.1.so>
0x00007f0158a500ca
>> 2 libpthread.so.0 0x0000003a86c0f500
>> 3 libLLVM-3.1.so <http://libLLVM-3.1.so>
0x00007f01583c346c
>> 4 libLLVM-3.1.so <http://libLLVM-3.1.so>
0x00007f0158546349
>> llvm::FPPassManager::runOnFunction(llvm::Function&) + 521
>> 5 libLLVM-3.1.so <http://libLLVM-3.1.so>
0x00007f01585463e3
>> llvm::FPPassManager::runOnModule(llvm::Module&) + 51
>> 6 libLLVM-3.1.so <http://libLLVM-3.1.so>
0x00007f0158545fae
>> llvm::MPPassManager::runOnModule(llvm::Module&) + 462
>> 7 libLLVM-3.1.so <http://libLLVM-3.1.so>
0x00007f01585460bd
>> llvm::PassManagerImpl::run(llvm::Module&) + 125
>> 8 llc 0x000000000040b012 main + 5218
>> 9 libc.so.6 0x0000003a8601ecdd __libc_start_main + 253
>> 10 llc 0x0000000000407d79
>> Stack dump:
>> 0. Program arguments: llc -load Debug/lib/P4.so
>> -regalloc=gc tst.bc
>> 1. Running pass 'Function Pass Manager' on module
'tst.bc'.
>> 2. Running pass 'Machine Loop Invariant Code
Motion' on
>> function '@main'
>> make: *** [tst.reg] Segmentation fault (core dumped)
>>
>>
>>
>> On 11/01/2012 04:59 PM, Lang Hames wrote:
>>
>> Hi Susan,
>>
>> Sorry - I had missed that you're using llvm-3.1, rather
>> than the
>> development branch. We encourage people to live on
>> top-of-tree - it's
>> well tested, easier for active developers to offer help
>> with, and
>> keeping up with incremental changes is often easier than
>> porting between
>> stable versions.
>>
>> It also sounds like you were building a Release version
>> of LLVM. That
>> will not have any asserts enabled (though it will have
>> some other
>> diagnostics). You will probably want to work with a
>> Debug+Asserts
>> version (<src>/configure --disable-optimized
>> --enable-assertions) while
>> you're developing your allocator and watch for any
>> asserts that trigger.
>>
>> In your case the Assertion that is triggering in PEI
>> indicates that the
>> MachineRegisterInfo object still contained some virtregs
post
>> register-allocation. You need to call
>> MRI->clearVirtRegs() at the end of
>> your allocator.
>>
>> Hope this helps!
>>
>> Cheers,
>> Lang.
>>
>> On Thu, Nov 1, 2012 at 2:41 PM, Susan Horwitz
>> <horwitz at cs.wisc.edu <mailto:horwitz at
cs.wisc.edu>
>> <mailto:horwitz at cs.wisc.edu
>> <mailto:horwitz at cs.wisc.edu>>> wrote:
>>
>> Hi again Lang,
>>
>> I decided to try the approach you proposed to see
>> whether it makes
>> the assembly-code problem go away. Again, I tried a
>> very simple
>> register allocator (attached) that just calls
>> vrm.assignVirt2Phys
>> for every vreg in each function, mapping the vreg to
>> the first preg
>> in the register class. I tried two versions: one
>> maps *every* vreg,
>> and the other only maps those for which
>> MRI->reg_empty(vreg) returns
>> false. In both cases I get a core dump somewhere
>> after my
>> reg-allocation pass has run (when I use the
"tst.c"
>> file that I sent
>> last time as input).
>>
>> Note also that there is no VirtRegMap.h in the
>> "include" directory
>> of my installed llvm-3.1. I had to copy that file
>> from the source
>> directory. That seems suspicious.
>>
>> Any thoughts?
>>
>> Thanks!
>>
>> Susan
>>
>>
>> On 10/31/2012 07:51 PM, Lang Hames wrote:
>>
>> Hi Susan,
>>
>> I'm having trouble reproducing that error on my
>> end, but I think the
>> problem is probably that you're not using the
>> VirtRegRewriter
>> infrastructure. What your allocator needs to do
>> is populate the
>> virtual
>> register mapping (VirtRegMap pass) with your
>> allocation, rather than
>> rewriting the registers directly through
>> MachineRegisterInfo.
>>
>> Have your allocator require and preserve the
>> VirtRegMap pass,
>> then in
>> your runOnMachineFunction pass grab a reference
>> to the pass with:
>>
>> VirtRegMap &vrm =
getAnalysis<VirtRegMap>();
>>
>> You can then describe your register allocations
with:
>>
>> vrm.assignVirt2Phys(<virtreg>, <physreg>)
>>
>> The VirtRegRewriter pass (in VirtRegMap.cpp) will
>> run after your
>> allocator and apply the mapping that you
>> described in the
>> VirtRegMap.
>>
>> I hope this helps. Let me know if it doesn't
fix
>> your issue.
>>
>> Cheers,
>> Lang.
>>
>> On Wed, Oct 31, 2012 at 3:54 PM, Susan Horwitz
>> <horwitz at cs.wisc.edu <mailto:horwitz at
cs.wisc.edu>
>> <mailto:horwitz at cs.wisc.edu <mailto:horwitz at
cs.wisc.edu>>
>> <mailto:horwitz at cs.wisc.edu
>> <mailto:horwitz at cs.wisc.edu> <mailto:horwitz at
cs.wisc.edu
>> <mailto:horwitz at cs.wisc.edu>>>> wrote:
>>
>> Thanks Lang!
>>
>> Here's another question: I'm trying to
>> process this input:
>>
>> int main() {
>> return 0;
>> }
>>
>> but I'm getting an error
>> Assertion `!Fn.getRegInfo().
>> getNumVirtRegs() &&
>> "Regalloc must
>>
>> assign all vregs"' failed.
>>
>> At the start of runOnMachineFunction I call
>> Fn.getRegInfo().
>> getNumVirtRegs();
>> and find that there is 1 virtual register.
>> However,
>> MRI->reg_empty(vreg)
>> tells me that it is not used or defined. So
my
>> register-allocation
>> code never sees it, and thus can't
allocate
>> a preg for it.
>> I tried
>> using MRI->replaceRegWith(vreg, preg);
>> (where preg is available to vreg's
register
>> class) but that
>> didn't
>> work. When I look, the number of vregs in
>> the function is
>> still 1.
>>
>> Can you help with this?
>>
>> Thanks again!
>>
>> Susan
>>
>>
>> On 10/31/2012 04:55 PM, Lang Hames wrote:
>>
>> Hi Susan,
>>
>> The meaning of "addRequired(X)"
is that
>> your pass needs
>> X to be
>> run, and
>> for X to be preserved by all passes that
>> run after X
>> and before your
>> pass. The PHIElemination and
>> TwoAddressInstruction
>> passes do not
>> preserve each other, hence there's no
>> way for the pass
>> manager to
>> schedule them for you if you
>> addRequire(...) them.
>>
>> The trick is that CodeGen will schedule
>> both of these
>> passes to
>> be run
>> before _any_ register allocation pass
>> (see Passes.cpp),
>> so you
>> needn't
>> require them explicitly - you can just
>> assume they have
>> been
>> run. If you
>> just remove those lines from your
>> getAnalysisUsage
>> method your pass
>> should now run as you expect.
>>
>> Cheers,
>> Lang.
>>
>> On Wed, Oct 31, 2012 at 1:46 PM, Susan
>> Horwitz
>> <horwitz at cs.wisc.edu <mailto:horwitz at
cs.wisc.edu>
>> <mailto:horwitz at cs.wisc.edu <mailto:horwitz at
cs.wisc.edu>>
>> <mailto:horwitz at cs.wisc.edu
>> <mailto:horwitz at cs.wisc.edu> <mailto:horwitz at
cs.wisc.edu
>> <mailto:horwitz at cs.wisc.edu>>>
>> <mailto:horwitz at cs.wisc.edu
>> <mailto:horwitz at cs.wisc.edu> <mailto:horwitz at
cs.wisc.edu
>> <mailto:horwitz at cs.wisc.edu>>
>> <mailto:horwitz at cs.wisc.edu
>> <mailto:horwitz at cs.wisc.edu> <mailto:horwitz at
cs.wisc.edu
>> <mailto:horwitz at cs.wisc.edu>>>>>
wrote:
>>
>> I'm trying to write a
>> MachineFunctionPass to do
>> register
>> allocation.
>> I have code that worked with an
>> old version of
>> LLVM. It
>> does not
>> work with llvm-3.1. (or various
>> other versions
>> that I've
>> tried).
>>
>> The first problem is that including
>> this line:
>>
>> AU.addRequiredID(__ TwoAddressInstructionPassID);
>>
>>
>> in method getAnalysisUsage causes a
>> runtime error:
>>
>> Unable to schedule 'Eliminate PHI
>> nodes for register
>> allocation'
>> required by 'Unnamed pass:
implement
>> Pass::getPassName()'
>> Unable to schedule pass
>> UNREACHABLE executed at ...
>>
>> I'm invoking the pass like this
>> (given input file
>> foo.c):
>>
>> clang -emit-llvm -O0 -c foo.c -o
foo.bc
>> opt -mem2reg foo.bc > foo.ssa
>> mv foo.ssa foo.bc
>> llc -load Debug/lib/P4.so
>> -regalloc=gc foo.bc
>>
>>
>> I've attached my entire file
(it's
>> very short).
>> Any help
>> would be
>> much appreciated!
>>
>> Susan Horwitz
>>
>> ______________________________ _________________
>> LLVM Developers mailing list
>> LLVMdev at cs.uiuc.edu <mailto:LLVMdev at
cs.uiuc.edu>
>> <mailto:LLVMdev at cs.uiuc.edu <mailto:LLVMdev at
cs.uiuc.edu>>
>> <mailto:LLVMdev at cs.uiuc.edu
>> <mailto:LLVMdev at cs.uiuc.edu> <mailto:LLVMdev at
cs.uiuc.edu
>> <mailto:LLVMdev at cs.uiuc.edu>>>
>> <mailto:LLVMdev at cs.uiuc.edu
>> <mailto:LLVMdev at cs.uiuc.edu> <mailto:LLVMdev at
cs.uiuc.edu
>> <mailto:LLVMdev at cs.uiuc.edu>>
>> <mailto:LLVMdev at cs.uiuc.edu
>> <mailto:LLVMdev at cs.uiuc.edu> <mailto:LLVMdev at
cs.uiuc.edu
>> <mailto:LLVMdev at cs.uiuc.edu>>>>
>>
>> http://llvm.cs.uiuc.edu
>> http://lists.cs.uiuc.edu/ mailman/listinfo/llvmdev
>>
<http://lists.cs.uiuc.edu/__mailman/listinfo/llvmdev
>>
<http://lists.cs.uiuc.edu/mailman/listinfo/llvmdev>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.llvm.org/pipermail/llvm-dev/attachments/20121104/96898448/attachment.html>
-------------- next part --------------
BC脌脼!
脤 ?#?A脠I29??
%
?b?EB?
B陇28I
2D$H
?!#脛R?
!r$脠Hb篓聽篓@脝冒 I
?每每每每脌A?F ? ?? ? ?脛每每每每` ? 2"H d??"陇??"茫?隆?L??
?陇LHs`??脗
??H ? s聽0G楼陇脌"V?脠M 0|脌;酶;聽?6篓wXwx?{p?6`?tp?z脌?68w篓?
1Qm z`t聽v@z`t脨茅z?z?m?x聽x聽x脨茅v聽q`zv脨茅0r聽s z0r脨茅`t聽v@z`t脨忙0r聽s
z0r脨忙`t聽v@z`t脨枚`t聽v@z`t脨枚r?zr?zr?mp聽p聽v@m0p聽v@z`t脨忙?p聽q x聽q x脨卯?zv聽s z`t脨鲁r?:dH
#DD?
?脡 @掳#)?# ?( 0Di? ?!脢 d? 2
?
L?? &G脝C
c
ED? y
3?
脛谩
f=?C8?脙?B?yxs?q
忙 铆么?3
B
脗脕
脦隆
q 1 脪酶脝芒脌貌Q`6?-K脜酶
脕忙?4脗没?冒>垄茫F`<脪L?
?4@酶脪 a ! E, F J聽??脰 漏?聽4?Q脌
露 3?
梅陇
1@ `?
&Yf ??
脿 庐a赂!R脨`?A 陇???7<脟D脭1( ?h陋Y?脕"鲁A
谩@ 1 >m?卤8掳眉@
Seemingly Similar Threads
- [LLVMdev] problem trying to write an LLVM register-allocation pass
- [LLVMdev] problem trying to write an LLVM register-allocation pass
- [LLVMdev] problem trying to write an LLVM register-allocation pass
- [LLVMdev] problem trying to write an LLVM register-allocation pass
- [LLVMdev] problem trying to write an LLVM register-allocation pass