On Wed, 03/11 10:06, Michael S. Tsirkin wrote:> On Wed, Mar 11, 2015 at 04:09:17PM +0800, Fam Zheng wrote: > > Currently shutdown is nop for virtio devices, but the core code could > > remove things behind us such as MSI-X handler etc. For example in the > > case of virtio-scsi-pci, the device may still try to send interupts, > > which will be on IRQ lines seeing MSI-X disabled. Those interrupts will > > be unhandled, and may cause flood.Here is the problem I want to solve - file system driver hang: If a fs code happen to hit __wait_on_buffer right after pci pci_device_shutdown disabled msix, it will never make progress because the requests it waits for will never be completed. So the system hangs. In other words we will want to reset virtio device before pci_device_shutdown AND wake up all waiters. Unfortunately, neither your patch nor mine does that, because virtio bus can be shutdown after pci bus (thanks to Jason for pointing out this). In that case, any completion after disabling msix is lost. Maybe we need both the pci shutdown handler to reset the device and the virtio shutdown handler to remove the device? Fam> > This sounds very tentative. Do you, in fact, observe some problems > with virtio scsi? How to reproduce them? this needs to go > into the commit messages.OK, my bad.> > > Remove the device in "shutdown" callback to allow device drivers clean > > up things. > > > > Signed-off-by: Fam Zheng <famz at redhat.com> > > I'm concerned this will cause more hangs on shutdown: one > of the reasons for reboot is device mal-functioning. > How about we just reset devices instead? Something like > the below (untested). > > Signed-off-by: Michael S. Tsirkin <mst at redhat.com> > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c > index 5ce2aa4..0769941 100644 > --- a/drivers/virtio/virtio.c > +++ b/drivers/virtio/virtio.c > @@ -269,6 +269,17 @@ static int virtio_dev_remove(struct device *_d) > return 0; > } > > +static void virtio_dev_shutdown(struct device *_d) > +{ > + struct virtio_device *dev = dev_to_virtio(_d); > + /* > + * Reset the device to make it stop sending interrupts, DMA, etc. > + * We are shutting down, no need for full cleanup. > + */ > + dev->config->reset(dev); > + > +} > + > static struct bus_type virtio_bus = { > .name = "virtio", > .match = virtio_dev_match, > @@ -276,6 +288,7 @@ static struct bus_type virtio_bus = { > .uevent = virtio_uevent, > .probe = virtio_dev_probe, > .remove = virtio_dev_remove, > + .shutdown = virtio_dev_shutdown, > }; > > bool virtio_device_is_legacy_only(struct virtio_device_id id)
Michael S. Tsirkin
2015-Mar-12 16:22 UTC
[PATCH] virtio: Remove virtio device during shutdown
On Wed, Mar 11, 2015 at 06:11:35PM +0800, Fam Zheng wrote:> On Wed, 03/11 10:06, Michael S. Tsirkin wrote: > > On Wed, Mar 11, 2015 at 04:09:17PM +0800, Fam Zheng wrote: > > > Currently shutdown is nop for virtio devices, but the core code could > > > remove things behind us such as MSI-X handler etc. For example in the > > > case of virtio-scsi-pci, the device may still try to send interupts, > > > which will be on IRQ lines seeing MSI-X disabled. Those interrupts will > > > be unhandled, and may cause flood. > > Here is the problem I want to solve - file system driver hang: > > If a fs code happen to hit __wait_on_buffer right after pci pci_device_shutdown > disabled msix, it will never make progress because the requests it waits for > will never be completed. So the system hangs.Paolo says that pci reset of virtio scsi device guarantees that all outstanding requests complete. If true and implemented correctly, I don't see what else needs to be done. You will need to debug this some more.> In other words we will want to reset virtio device before pci_device_shutdown > AND wake up all waiters. > > Unfortunately, neither your patch nor mine does that, because virtio bus can be > shutdown after pci bus (thanks to Jason for pointing out this). In that case, > any completion after disabling msix is lost. > > Maybe we need both the pci shutdown handler to reset the device and the virtio > shutdown handler to remove the device? > > Fam > > > > > This sounds very tentative. Do you, in fact, observe some problems > > with virtio scsi? How to reproduce them? this needs to go > > into the commit messages. > > OK, my bad. > > > > > > Remove the device in "shutdown" callback to allow device drivers clean > > > up things. > > > > > > Signed-off-by: Fam Zheng <famz at redhat.com> > > > > I'm concerned this will cause more hangs on shutdown: one > > of the reasons for reboot is device mal-functioning. > > How about we just reset devices instead? Something like > > the below (untested). > > > > Signed-off-by: Michael S. Tsirkin <mst at redhat.com> > > > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c > > index 5ce2aa4..0769941 100644 > > --- a/drivers/virtio/virtio.c > > +++ b/drivers/virtio/virtio.c > > @@ -269,6 +269,17 @@ static int virtio_dev_remove(struct device *_d) > > return 0; > > } > > > > +static void virtio_dev_shutdown(struct device *_d) > > +{ > > + struct virtio_device *dev = dev_to_virtio(_d); > > + /* > > + * Reset the device to make it stop sending interrupts, DMA, etc. > > + * We are shutting down, no need for full cleanup. > > + */ > > + dev->config->reset(dev); > > + > > +} > > + > > static struct bus_type virtio_bus = { > > .name = "virtio", > > .match = virtio_dev_match, > > @@ -276,6 +288,7 @@ static struct bus_type virtio_bus = { > > .uevent = virtio_uevent, > > .probe = virtio_dev_probe, > > .remove = virtio_dev_remove, > > + .shutdown = virtio_dev_shutdown, > > }; > > > > bool virtio_device_is_legacy_only(struct virtio_device_id id)
On 12/03/2015 17:22, Michael S. Tsirkin wrote:> On Wed, Mar 11, 2015 at 06:11:35PM +0800, Fam Zheng wrote: >> On Wed, 03/11 10:06, Michael S. Tsirkin wrote: >>> On Wed, Mar 11, 2015 at 04:09:17PM +0800, Fam Zheng wrote: >>>> Currently shutdown is nop for virtio devices, but the core code could >>>> remove things behind us such as MSI-X handler etc. For example in the >>>> case of virtio-scsi-pci, the device may still try to send interupts, >>>> which will be on IRQ lines seeing MSI-X disabled. Those interrupts will >>>> be unhandled, and may cause flood. >> >> Here is the problem I want to solve - file system driver hang: >> >> If a fs code happen to hit __wait_on_buffer right after pci pci_device_shutdown >> disabled msix, it will never make progress because the requests it waits for >> will never be completed. So the system hangs. > > Paolo says that pci reset of virtio scsi device guarantees > that all outstanding requests complete.For what it's worth, see here: static void virtio_scsi_reset(VirtIODevice *vdev) { ... s->resetting++; qbus_reset_all(&s->bus.qbus); s->resetting--; ... } static void scsi_disk_reset(DeviceState *dev) { SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev); uint64_t nb_sectors; scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET)); ... } Paolo> If true and implemented correctly, I don't see what else > needs to be done. > > You will need to debug this some more. > > >> In other words we will want to reset virtio device before pci_device_shutdown >> AND wake up all waiters. >> >> Unfortunately, neither your patch nor mine does that, because virtio bus can be >> shutdown after pci bus (thanks to Jason for pointing out this). In that case, >> any completion after disabling msix is lost. >> >> Maybe we need both the pci shutdown handler to reset the device and the virtio >> shutdown handler to remove the device? >> >> Fam >> >>> >>> This sounds very tentative. Do you, in fact, observe some problems >>> with virtio scsi? How to reproduce them? this needs to go >>> into the commit messages. >> >> OK, my bad. >> >>> >>>> Remove the device in "shutdown" callback to allow device drivers clean >>>> up things. >>>> >>>> Signed-off-by: Fam Zheng <famz at redhat.com> >>> >>> I'm concerned this will cause more hangs on shutdown: one >>> of the reasons for reboot is device mal-functioning. >>> How about we just reset devices instead? Something like >>> the below (untested). >>> >>> Signed-off-by: Michael S. Tsirkin <mst at redhat.com> >>> >>> diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c >>> index 5ce2aa4..0769941 100644 >>> --- a/drivers/virtio/virtio.c >>> +++ b/drivers/virtio/virtio.c >>> @@ -269,6 +269,17 @@ static int virtio_dev_remove(struct device *_d) >>> return 0; >>> } >>> >>> +static void virtio_dev_shutdown(struct device *_d) >>> +{ >>> + struct virtio_device *dev = dev_to_virtio(_d); >>> + /* >>> + * Reset the device to make it stop sending interrupts, DMA, etc. >>> + * We are shutting down, no need for full cleanup. >>> + */ >>> + dev->config->reset(dev); >>> + >>> +} >>> + >>> static struct bus_type virtio_bus = { >>> .name = "virtio", >>> .match = virtio_dev_match, >>> @@ -276,6 +288,7 @@ static struct bus_type virtio_bus = { >>> .uevent = virtio_uevent, >>> .probe = virtio_dev_probe, >>> .remove = virtio_dev_remove, >>> + .shutdown = virtio_dev_shutdown, >>> }; >>> >>> bool virtio_device_is_legacy_only(struct virtio_device_id id)
On Thu, 03/12 17:22, Michael S. Tsirkin wrote:> On Wed, Mar 11, 2015 at 06:11:35PM +0800, Fam Zheng wrote: > > On Wed, 03/11 10:06, Michael S. Tsirkin wrote: > > > On Wed, Mar 11, 2015 at 04:09:17PM +0800, Fam Zheng wrote: > > > > Currently shutdown is nop for virtio devices, but the core code could > > > > remove things behind us such as MSI-X handler etc. For example in the > > > > case of virtio-scsi-pci, the device may still try to send interupts, > > > > which will be on IRQ lines seeing MSI-X disabled. Those interrupts will > > > > be unhandled, and may cause flood. > > > > Here is the problem I want to solve - file system driver hang: > > > > If a fs code happen to hit __wait_on_buffer right after pci pci_device_shutdown > > disabled msix, it will never make progress because the requests it waits for > > will never be completed. So the system hangs. > > Paolo says that pci reset of virtio scsi device guarantees > that all outstanding requests complete. > > If true and implemented correctly, I don't see what else > needs to be done. > > You will need to debug this some more.First of all I was wrong about the fs driver above, scratch that, I'm sorry for the misleading. Regarding the hang in shutdown, Ulrich Obergfell has already pointed out that the vcpu is "busy/stuck in interrupt processing": https://bugzilla.redhat.com/attachment.cgi?id=998391 (RHBZ 1199155) Summary: The reason it is stuck is that an IRQ from virtio-scsi-pci is not handled. Why is there that IRQ? Because pci core code disabled msix. Why is it not handled? Because it's done behind virtio-scsi, who still is waiting for msix. "Hence, the interrupt will not be acknowledged and the guest becomes flooded with IRQ 11 interrupt." Fortunately it's not a livelock for upstream, because of: commit 184564efae4d775225c8fe3b762a56956fb1f827 Author: Zhang Haoyu <zhanghy at sangfor.com> Date: Thu Sep 11 16:47:04 2014 +0800 kvm: ioapic: conditionally delay irq delivery duringeoi broadcast But we still should do the shutdown right. I also propose to not shutdown msix from pci core shutdown if the device doesn't have shutdown function: http://www.spinics.net/lists/kernel/msg1944041.html With that patch is applied, the "nop" .shutdown in virtio-pci shouldn't hurt much. Regarding handing the requests, now I don't know if we really care about them at shutdown. As you said, waiting for requests may cause more hang. Ideas? Fam
Apparently Analagous Threads
- [PATCH] virtio: Remove virtio device during shutdown
- [PATCH] virtio: Remove virtio device during shutdown
- [PATCH] virtio: Remove virtio device during shutdown
- [PATCH] virtio: Remove virtio device during shutdown
- [PATCH] virtio: Remove virtio device during shutdown