Add functions implementing MSI-X support. First user will be virtio-pci.
Note that platform must set a flag to declare MSI supported.
For PC this will be set by APIC.
Signed-off-by: Michael S. Tsirkin <mst at redhat.com>
---
Makefile.target | 2 +-
hw/msix.c | 423 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
hw/msix.h | 35 +++++
hw/pci.h | 20 +++
4 files changed, 479 insertions(+), 1 deletions(-)
create mode 100644 hw/msix.c
create mode 100644 hw/msix.h
diff --git a/Makefile.target b/Makefile.target
index 664a1e3..87b2859 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -486,7 +486,7 @@ endif #CONFIG_BSD_USER
ifndef CONFIG_USER_ONLY
OBJS=vl.o osdep.o monitor.o pci.o loader.o isa_mmio.o machine.o \
- gdbstub.o gdbstub-xml.o
+ gdbstub.o gdbstub-xml.o msix.o
# virtio has to be here due to weird dependency between PCI and virtio-net.
# need to fix this properly
OBJS+=virtio-blk.o virtio-balloon.o virtio-net.o virtio-console.o
diff --git a/hw/msix.c b/hw/msix.c
new file mode 100644
index 0000000..4db2fc1
--- /dev/null
+++ b/hw/msix.c
@@ -0,0 +1,423 @@
+/*
+ * MSI-X device support
+ *
+ * This module includes support for MSI-X in pci devices.
+ *
+ * Author: Michael S. Tsirkin <mst at redhat.com>
+ *
+ * Copyright (c) 2009, Red Hat Inc, Michael S. Tsirkin (mst at redhat.com)
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2. See
+ * the COPYING file in the top-level directory.
+ */
+
+#include "hw.h"
+#include "msix.h"
+#include "pci.h"
+
+/* Declaration from linux/pci_regs.h */
+#define PCI_CAP_ID_MSIX 0x11 /* MSI-X */
+#define PCI_MSIX_FLAGS 2 /* Table at lower 11 bits */
+#define PCI_MSIX_FLAGS_QSIZE 0x7FF
+#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
+#define PCI_MSIX_FLAGS_BIRMASK (7 << 0)
+
+/* MSI-X capability structure */
+#define MSIX_TABLE_OFFSET 4
+#define MSIX_PBA_OFFSET 8
+#define MSIX_CAP_LENGTH 12
+
+/* MSI enable bit is in byte 1 in FLAGS register */
+#define MSIX_ENABLE_OFFSET (PCI_MSIX_FLAGS + 1)
+#define MSIX_ENABLE_MASK (PCI_MSIX_FLAGS_ENABLE >> 8)
+
+/* MSI-X table format */
+#define MSIX_MSG_ADDR 0
+#define MSIX_MSG_UPPER_ADDR 4
+#define MSIX_MSG_DATA 8
+#define MSIX_VECTOR_CTRL 12
+#define MSIX_ENTRY_SIZE 16
+#define MSIX_VECTOR_MASK 0x1
+
+/* How much space does an MSIX table need. */
+/* The spec requires giving the table structure
+ * a 4K aligned region all by itself. Align it to
+ * target pages so that drivers can do passthrough
+ * on the rest of the region. */
+#define MSIX_PAGE_SIZE TARGET_PAGE_ALIGN(0x1000)
+/* Reserve second half of the page for pending bits */
+#define MSIX_PAGE_PENDING (MSIX_PAGE_SIZE / 2)
+#define MSIX_MAX_ENTRIES 32
+
+
+#ifdef MSIX_DEBUG
+#define DEBUG(fmt, ...) \
+ do { \
+ fprintf(stderr, "%s: " fmt, __func__ , __VA_ARGS__); \
+ } while (0)
+#else
+#define DEBUG(fmt, ...) do { } while(0)
+#endif
+
+/* Flag to globally disable MSI-X support */
+int msix_disable;
+
+/* Flag for interrupt controller to declare MSI-X support */
+int msix_supported;
+
+/* Add MSI-X capability to the config space for the device. */
+/* Given a bar and its size, add MSI-X table on top of it
+ * and fill MSI-X capability in the config space.
+ * Original bar size must be a power of 2 or 0.
+ * New bar size is returned. */
+static int msix_add_config(struct PCIDevice *pdev, unsigned short nentries,
+ unsigned bar_nr, unsigned bar_size)
+{
+ int config_offset;
+ uint8_t *config;
+ uint32_t new_size;
+
+ if (nentries < 1 || nentries > PCI_MSIX_FLAGS_QSIZE + 1)
+ return -EINVAL;
+ if (bar_size > 0x80000000)
+ return -ENOSPC;
+
+ /* Add space for MSI-X structures */
+ if (!bar_size)
+ new_size = MSIX_PAGE_SIZE;
+ else if (bar_size < MSIX_PAGE_SIZE) {
+ bar_size = MSIX_PAGE_SIZE;
+ new_size = MSIX_PAGE_SIZE * 2;
+ } else
+ new_size = bar_size * 2;
+
+ pdev->msix_bar_size = new_size;
+ config_offset = pci_add_capability(pdev, PCI_CAP_ID_MSIX, MSIX_CAP_LENGTH);
+ if (config_offset < 0)
+ return config_offset;
+ config = pdev->config + config_offset;
+
+ pci_set_word(config + PCI_MSIX_FLAGS, nentries - 1);
+ /* Table on top of BAR */
+ pci_set_long(config + MSIX_TABLE_OFFSET, bar_size | bar_nr);
+ /* Pending bits on top of that */
+ pci_set_long(config + MSIX_PBA_OFFSET, (bar_size + MSIX_PAGE_PENDING) |
+ bar_nr);
+ pdev->msix_cap = config_offset;
+ /* Make flags bit writeable. */
+ pdev->mask[config_offset + MSIX_ENABLE_OFFSET] |= MSIX_ENABLE_MASK;
+ return 0;
+}
+
+static void msix_free_irq_entries(PCIDevice *dev)
+{
+ int vector;
+
+ for (vector = 0; vector < dev->msix_entries_nr; ++vector)
+ dev->msix_entry_used[vector] = 0;
+}
+
+/* Handle MSI-X capability config write. */
+void msix_write_config(PCIDevice *dev, uint32_t addr,
+ uint32_t val, int len)
+{
+ unsigned enable_pos = dev->msix_cap + MSIX_ENABLE_OFFSET;
+ if (addr + len <= enable_pos || addr > enable_pos)
+ return;
+
+ if (msix_enabled(dev))
+ qemu_set_irq(dev->irq[0], 0);
+}
+
+static uint32_t msix_mmio_readl(void *opaque, target_phys_addr_t addr)
+{
+ PCIDevice *dev = opaque;
+ unsigned int offset = addr & (MSIX_PAGE_SIZE - 1);
+ void *page = dev->msix_table_page;
+ uint32_t val = 0;
+
+ memcpy(&val, (void *)((char *)page + offset), 4);
+
+ return val;
+}
+
+static uint32_t msix_mmio_read_unallowed(void *opaque, target_phys_addr_t addr)
+{
+ fprintf(stderr, "MSI-X: only dword read is allowed!\n");
+ return 0;
+}
+
+static uint8_t msix_pending_mask(int vector)
+{
+ return 1 << (vector % 8);
+}
+
+static uint8_t *msix_pending_byte(PCIDevice *dev, int vector)
+{
+ return dev->msix_table_page + MSIX_PAGE_PENDING + vector / 8;
+}
+
+static int msix_is_pending(PCIDevice *dev, int vector)
+{
+ return *msix_pending_byte(dev, vector) & msix_pending_mask(vector);
+}
+
+static void msix_set_pending(PCIDevice *dev, int vector)
+{
+ *msix_pending_byte(dev, vector) |= msix_pending_mask(vector);
+}
+
+static void msix_clr_pending(PCIDevice *dev, int vector)
+{
+ *msix_pending_byte(dev, vector) &= ~msix_pending_mask(vector);
+}
+
+static int msix_is_masked(PCIDevice *dev, int vector)
+{
+ unsigned offset = vector * MSIX_ENTRY_SIZE + MSIX_VECTOR_CTRL;
+ return dev->msix_table_page[offset] & MSIX_VECTOR_MASK;
+}
+
+static void msix_mmio_writel(void *opaque, target_phys_addr_t addr,
+ uint32_t val)
+{
+ PCIDevice *dev = opaque;
+ unsigned int offset = addr & (MSIX_PAGE_SIZE - 1);
+ int vector = offset / MSIX_ENTRY_SIZE;
+ memcpy(dev->msix_table_page + offset, &val, 4);
+ if (!msix_is_masked(dev, vector) && msix_is_pending(dev, vector)) {
+ msix_clr_pending(dev, vector);
+ msix_notify(dev, vector);
+ }
+}
+
+static void msix_mmio_write_unallowed(void *opaque, target_phys_addr_t addr,
+ uint32_t val)
+{
+ fprintf(stderr, "MSI-X: only dword write is allowed!\n");
+}
+
+static CPUWriteMemoryFunc *msix_mmio_write[] = {
+ msix_mmio_write_unallowed, msix_mmio_write_unallowed, msix_mmio_writel
+};
+
+static CPUReadMemoryFunc *msix_mmio_read[] = {
+ msix_mmio_read_unallowed, msix_mmio_read_unallowed, msix_mmio_readl
+};
+
+/* Should be called from device's map method. */
+void msix_mmio_map(PCIDevice *d, int region_num,
+ uint32_t addr, uint32_t size, int type)
+{
+ uint8_t *config = d->config + d->msix_cap;
+ uint32_t table = pci_get_long(config + MSIX_TABLE_OFFSET);
+ uint32_t offset = table & ~(MSIX_PAGE_SIZE - 1);
+ /* TODO: for assigned devices, we'll want to make it possible to map
+ * pending bits separately in case they are in a separate bar. */
+ int table_bir = table & PCI_MSIX_FLAGS_BIRMASK;
+
+ if (table_bir != region_num)
+ return;
+ if (size <= offset)
+ return;
+ cpu_register_physical_memory(addr + offset, size - offset,
+ d->msix_mmio_index);
+}
+
+/* Initialize the MSI-X structures. Note: if MSI-X is supported, BAR size is
+ * modified, it should be retrieved with msix_bar_size. */
+int msix_init(struct PCIDevice *dev, unsigned short nentries,
+ unsigned bar_nr, unsigned bar_size)
+{
+ int ret = -ENOMEM;
+ /* Nothing to do if MSI is not supported by interrupt controller */
+ if (!msix_supported)
+ return -ENOTTY;
+
+ if (nentries > MSIX_MAX_ENTRIES)
+ return -EINVAL;
+
+ dev->msix_entry_used = qemu_mallocz(MSIX_MAX_ENTRIES *
+ sizeof *dev->msix_entry_used);
+ if (!dev->msix_entry_used)
+ goto err_used;
+
+ dev->msix_table_page = qemu_mallocz(MSIX_PAGE_SIZE);
+ if (!dev->msix_table_page)
+ goto err_page;
+
+ dev->msix_mmio_index = cpu_register_io_memory(0, msix_mmio_read,
+ msix_mmio_write, dev);
+ if (dev->msix_mmio_index == -1) {
+ ret = -EBUSY;
+ goto err_index;
+ }
+
+ dev->msix_entries_nr = nentries;
+ dev->cap_supported |= QEMU_PCI_CAP_MSIX;
+ /* If disabled, stop here. User can later load confiuration with MSI-X
+ * enabled. */
+ if (msix_disable)
+ return 0;
+
+ ret = msix_add_config(dev, nentries, bar_nr, bar_size);
+ if (ret)
+ goto err_config;
+
+ dev->cap_present |= QEMU_PCI_CAP_MSIX;
+ return 0;
+
+err_config:
+ cpu_unregister_io_memory(dev->msix_mmio_index);
+err_index:
+ qemu_free(dev->msix_table_page);
+ dev->msix_table_page = NULL;
+err_page:
+ qemu_free(dev->msix_entry_used);
+ dev->msix_entry_used = NULL;
+err_used:
+ return ret;
+}
+
+/* Clean up resources for the device. */
+int msix_uninit(PCIDevice *dev)
+{
+ if (!(dev->cap_supported & QEMU_PCI_CAP_MSIX))
+ return 0;
+ pci_del_capability(dev, PCI_CAP_ID_MSIX, MSIX_CAP_LENGTH);
+ dev->msix_cap = 0;
+ msix_free_irq_entries(dev);
+ dev->msix_entries_nr = 0;
+ cpu_unregister_io_memory(dev->msix_mmio_index);
+ qemu_free(dev->msix_table_page);
+ dev->msix_table_page = NULL;
+ qemu_free(dev->msix_entry_used);
+ dev->msix_entry_used = NULL;
+ dev->cap_present &= ~QEMU_PCI_CAP_MSIX;
+ dev->cap_supported &= ~QEMU_PCI_CAP_MSIX;
+ return 0;
+}
+
+void msix_save(PCIDevice *dev, QEMUFile *f)
+{
+ unsigned nentries = (pci_get_word(dev->config + PCI_MSIX_FLAGS) &
+ PCI_MSIX_FLAGS_QSIZE) + 1;
+ qemu_put_buffer(f, dev->msix_table_page, nentries * MSIX_ENTRY_SIZE);
+ qemu_put_buffer(f, dev->msix_table_page + MSIX_PAGE_PENDING,
+ (nentries + 7) / 8);
+}
+
+/* Should be called after restoring the config space. */
+int msix_load(PCIDevice *dev, QEMUFile *f)
+{
+ uint8_t offset = pci_find_capability(dev, PCI_CAP_ID_MSIX);
+ unsigned nentries;
+
+ if (!!(dev->cap_present & QEMU_PCI_CAP_MSIX) == !!offset) {
+ fprintf(stderr, "MSI-X bit set but no capability is
present\n");
+ return -EINVAL;
+ }
+
+ msix_free_irq_entries(dev);
+
+ if (!dev->cap_present & QEMU_PCI_CAP_MSIX)
+ return 0;
+
+ /* Sanity check: we probably could add more of these. */
+ nentries = (pci_get_word(dev->config + PCI_MSIX_FLAGS) &
+ PCI_MSIX_FLAGS_QSIZE) + 1;
+ if (nentries > MSIX_MAX_ENTRIES) {
+ fprintf(stderr, "msix_load: nentries mismatch: %d > %d\n",
+ nentries, dev->msix_entries_nr);
+ return -EINVAL;
+ }
+
+ /* Make flags bit writeable. */
+ dev->mask[offset + MSIX_ENABLE_OFFSET] |= MSIX_ENABLE_MASK;
+ /* Reserve space used by this capability */
+ pci_reserve_capability(dev, offset, MSIX_CAP_LENGTH);
+ /* Store the new offset */
+ dev->msix_cap = offset;
+
+ dev->msix_entries_nr = nentries;
+
+ qemu_get_buffer(f, dev->msix_table_page, nentries * MSIX_ENTRY_SIZE);
+ qemu_get_buffer(f, dev->msix_table_page + MSIX_PAGE_PENDING,
+ (nentries + 7) / 8);
+
+ return 0;
+}
+
+/* Does device support MSI-X? */
+int msix_present(PCIDevice *dev)
+{
+ return dev->cap_present & QEMU_PCI_CAP_MSIX;
+}
+
+/* Is MSI-X enabled? */
+int msix_enabled(PCIDevice *dev)
+{
+ return (dev->cap_present & QEMU_PCI_CAP_MSIX) &&
+ (dev->config[dev->msix_cap + MSIX_ENABLE_OFFSET] &
+ MSIX_ENABLE_MASK);
+}
+
+/* Size of bar where MSI-X table resides, or 0 if MSI-X not supported. */
+uint32_t msix_bar_size(PCIDevice *dev)
+{
+ return (dev->cap_present & QEMU_PCI_CAP_MSIX) ?
+ dev->msix_bar_size : 0;
+}
+
+/* Send an MSI-X message */
+void msix_notify(PCIDevice *dev, unsigned vector)
+{
+ uint8_t *table_entry = dev->msix_table_page + vector * MSIX_ENTRY_SIZE;
+ uint64_t address;
+ uint32_t data;
+
+ if (vector >= dev->msix_entries_nr ||
!dev->msix_entry_used[vector])
+ return;
+ if (msix_is_masked(dev, vector)) {
+ msix_set_pending(dev, vector);
+ return;
+ }
+
+ address = pci_get_long(table_entry + MSIX_MSG_UPPER_ADDR);
+ address = (address << 32) | pci_get_long(table_entry +
MSIX_MSG_ADDR);
+ data = pci_get_long(table_entry + MSIX_MSG_DATA);
+ stl_phys(address, data);
+}
+
+void msix_reset(PCIDevice *dev)
+{
+ if (!(dev->cap_present & QEMU_PCI_CAP_MSIX))
+ return;
+ msix_free_irq_entries(dev);
+ dev->config[dev->msix_cap + MSIX_ENABLE_OFFSET] &=
MSIX_ENABLE_MASK;
+ memset(dev->msix_table_page, 0, MSIX_PAGE_SIZE);
+}
+
+/* PCI spec suggests that devices make it possible for software to configure
+ * less vectors than supported by the device, but does not specify a standard
+ * mechanism for devices to do so.
+ *
+ * We support this by asking devices to declare vectors software is going to
+ * actually use, and checking this on the notification path. Devices that
+ * don't want to follow the spec suggestion can declare all vectors as
used. */
+
+/* Mark vector as used. */
+int msix_vector_use(PCIDevice *dev, unsigned vector)
+{
+ if (vector >= dev->msix_entries_nr)
+ return -EINVAL;
+ dev->msix_entry_used[vector]++;
+ return 0;
+}
+
+/* Mark vector as unused. */
+void msix_vector_unuse(PCIDevice *dev, unsigned vector)
+{
+ if (vector < dev->msix_entries_nr &&
dev->msix_entry_used[vector])
+ --dev->msix_entry_used[vector];
+}
diff --git a/hw/msix.h b/hw/msix.h
new file mode 100644
index 0000000..79e84a3
--- /dev/null
+++ b/hw/msix.h
@@ -0,0 +1,35 @@
+#ifndef QEMU_MSIX_H
+#define QEMU_MSIX_H
+
+#include "qemu-common.h"
+
+int msix_init(PCIDevice *pdev, unsigned short nentries,
+ unsigned bar_nr, unsigned bar_size);
+
+void msix_write_config(PCIDevice *pci_dev, uint32_t address,
+ uint32_t val, int len);
+
+void msix_mmio_map(PCIDevice *pci_dev, int region_num,
+ uint32_t addr, uint32_t size, int type);
+
+int msix_uninit(PCIDevice *d);
+
+void msix_save(PCIDevice *dev, QEMUFile *f);
+int msix_load(PCIDevice *dev, QEMUFile *f);
+
+int msix_enabled(PCIDevice *dev);
+int msix_present(PCIDevice *dev);
+
+uint32_t msix_bar_size(PCIDevice *dev);
+
+int msix_vector_use(PCIDevice *dev, unsigned vector);
+void msix_vector_unuse(PCIDevice *dev, unsigned vector);
+
+void msix_notify(PCIDevice *dev, unsigned vector);
+
+void msix_reset(PCIDevice *dev);
+
+extern int msix_disable;
+extern int msix_supported;
+
+#endif
diff --git a/hw/pci.h b/hw/pci.h
index 4e112a3..6da626b 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -156,6 +156,11 @@ typedef struct PCIIORegion {
/* Size of the standard PCI config space */
#define PCI_CONFIG_SPACE_SIZE 0x100
+/* Bits in cap_supported/cap_present fields. */
+enum {
+ QEMU_PCI_CAP_MSIX = 0x1,
+};
+
struct PCIDevice {
DeviceState qdev;
/* PCI config space */
@@ -189,6 +194,21 @@ struct PCIDevice {
/* Capability bits for save/load */
uint32_t cap_supported;
uint32_t cap_present;
+
+ /* Offset of MSI-X capability in config space */
+ uint8_t msix_cap;
+
+ /* MSI-X entries */
+ int msix_entries_nr;
+
+ /* Space to store MSIX table */
+ uint8_t *msix_table_page;
+ /* MMIO index used to map MSIX table and pending bit entries. */
+ int msix_mmio_index;
+ /* Reference-count for entries actually in use by driver. */
+ unsigned *msix_entry_used;
+ /* Region including the MSI-X table */
+ uint32_t msix_bar_size;
};
PCIDevice *pci_register_device(PCIBus *bus, const char *name,
--
1.6.3.1.56.g79e1.dirty