> > In other words: Class B''s rate should always be x times the
_current_ rate
> > of class A. Ceiling rates should apply nevertheless though.
> >
> > e.g.: Class A: rate 500 kbit, ceil 2000 kbit
> > Class B: rate 0.25 * (current rate of class A), ceil 1000 kbit
> You can only do this with external scripting.
There are two possible interpretations for the term "current rate".
If you mean the one declared, then I think Stef is correct.
That is, you can declare class B to have rate 125k which is .25 that
of class A, but if you then change class A to 1000, class B is still
125, no longer .25 class A.
However, you more likely mean that the bandwidth actually used
for class B at any time should be .25 that of class A.
And this is the default behavior if you just declare the class B rate
to be 125. That is, excess bandwidth is shared in proportion to the
requested rates. Just put A and B below a common parent (perhaps with
a ceil of 3000k).
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
