search for: stef

Hello there, Having made quite a lot of expensive mistakes i have finally clobbered together a script for the users on my network. Have a look at it and please suggest as to how can i limit bandwidth to each ip on this network to about 64Kbits. Trevor -- ( >- GNU/LINUX, It''s all about CHOICE -< ) /~\ __ trevor@clovertechnologies.com __ /~\ | \) / Pre Sales

Hi Stef, Reffering to page < http://www.docum.org/stef.coene/qos/faq/cache/7.html > I found a para as follows, " CBQ is not always as accurate as it should be. See docum.org on the test page for some tests with bounded classes. The algorithm used by cbq is very "link sensitive"....

I posted earlier when I noticed that htb was releasing packets in pairs, even though my burst/quantums were 1 pkt. To fix I set HTB_HYSTERESIS 0 in net/sched/sch_htb.c . This gives a noticable gain in upstream worst case latency, for me with 256kbit/s up I used to see +90 sometimes, now it''s +45. For the many who have 128 up it should limit them to +90 rather than +180. Andy.

Hi, can any body suggest any tool which can show the utilisation for individual classes for HTB. preferable written in C/or shell script. Regards Jayesh ------------------------------------------------- Still single? Click here to find the perfect match. http://www.bharatmatrimony.com/cgi-bin/bmclicks1.cgi?141

Hello, I'm using dovecot and I want to use the "expire" plugin. However, it doesn't work, i.e. mails do not get deleted. I ran `/usr/sbin/dovecot --exec-mail ext /usr/libexec/dovecot/expire-tool --test` and besides printing Info: stef/Trash: no messages left Info: stef/Spam: no messages left it doesn't do anything (especially not deleting e-mails). Obviously, in stef/Trash and stef/Spam, there are e-mails waiting to be deleted. I'm using dbox as mail storage; and use dbox:/var/mail/%u as mail_location in dovecot.conf...

Hi, we r using HTB algorithm,for traffic shaping, we are facing a problem. we are able to create multiple classes,filters. But when we delete 1 filter all filter gets deleted. how do we avoid that. waiting for you reply Regards Jayesh ------------------------------------------------- Shop & Save at Sifymall.com! Special Festive Offers - up to 60% off on DVD players, MP3 Players. Mobile

This an open plea for someone with knowledge of RubyGems to explain why RubyGems stays in memory (over 10MB) after a Rails application is loaded. I am unable to figure out why this would be necessary. I haven''t had any response from Jim or Chad from RubyGems about it so I thought I would throw it open to the list to see if anyone could educate me or share thier experiences with this.

tc qdisc add dev eth0 root sfq perturb 10 I want to set perturb to 8 then i used this tc qdisc add dev eth0 root sfq perturb 8 system give me the following message RTNETLINK file exists I delete the rule by this :"tc qdisc del dev eth0 root sfq perturb 10" please tell me how can i delete the rule by another way and where is "RTNETLINK file"

My gateway is showing these messages: htb*g j=4929 htb*r7 m=0 htb*r6 m=0 htb*r5 m=0 htb*r4 m=0 htb*r3 m=0 htb*r2 m=0 htb*r1 m=0 htb*r0 m=0 HTB: quantum of class 10001 is big. Consider r2q change. What does it means ? Thanks, Luciano Lima _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:

Hello, Does anyone know when one should use cbq versus (simpler more accurate) htb? Specifically does cbq have added functionality that may be of interest to certain applications? from htb home> Both CBQ and HTB help you to control the use of the outbound bandwidth on a given link. Both allow you to use one physical link to simulate several slower links and to send different kinds of

Hi, I want to see bandwidth every ip address in the local network that passing my linux gateway in the console, may be it''s similar like mrtg (web based version) It''s possible ? Best regards, >--<Kristiadi Himawan>--<

Hi, I have a problem with ''tc filter'' on a 2.4.22 kernel from Slackware 9.1 distribution. The tc command binary is from htb3.6-020525.tgz (http://luxik.cdi.cz/~devik/qos/htb) I''m trying the following command sequence: tc qdisc add dev eth0 root handle 1: htb default 1 r2q 1 tc class add dev eth0 parent 1: classid 1:1 htb rate 1200kbit ceil 1200kbit tc class add dev

How to do ensure a class not lended and not borrowed each other. I do cburst burst 0b ,but ctokens tokens go to negative! --------------------------------- Do You Yahoo!? "更多惊喜，同样精彩，NetVista A30 热卖" --0-611462377-1048485942=:33792 Content-Type: text/html; charset=gb2312 Content-Transfer-Encoding: 8bit <P>How to do ensure a class not lended and not borrowed each

Hi, I want work out a GUI interface for htb and now here comes to the part about adding and removing classes and filters. Here is an example script. TC="tc" DEV="dev eth1" echo "Add root qdisc, default traffic go to 1:30" $TC qdisc add $DEV root handle 1: htb default 30 echo "Divide the traffic into different classes and levels" # -------- level 1

This is one of my test classes: class htb 1:10 parent 1:1 prio 0 quantum 2048 rate 160Kbit ceil 400Kbit burst 1803b/8 mpu 0b cburst 2111b/8 mpu 0b level 0 Q1: where does "level 0" stand for? Q2: where does this b/8 stand for? Q3: this is on a i386 platform, so timer resolution should be 10mS. According to the doc the minimal burst should be 10mS*160Kbit=1600. Why is it 1803? Q4: I

Hi all, I have a debian server with 4 network cards: The first card is used to connect to public network and this network connects with a big router. The Second, third and fourth cards are used by other networks. The first card used a dinamic route with the big router. The other cards used a static route with a little router. All runs good but my problem is when I try to use the IP of my first

Hi I''m completely stuck with the tcng language - I assume there must be some way to arrange queues hierachically like eth1 | TBF | PRIO / \ class class but my attempt (below) produces a "inferno.tc:8: qdisc "tbf" has no classes near "prio"" when run through tcc. dev eth1 { egress { tbf (rate 128kbps, burst 64kb,

Hi everybody! I''ve been trying with htb and tc filter. It seemed to work fine, but after testing with ethloop I''ve realized that traffic is not being distributed through the leaves as I thought. When sending packets to 1:10 and 1:11 at the same time, there''s no bandwidth sharing. There''s no traffic through 1:11 until traffic through 1:10 has finished. Though

Hi, The CBQ config file shud be some thing like this. DEVICE=eth0,10Mbit,1Mbit RATE=50Kbit WEIGHT=5Kbit Shall i hardcode the DEVICE BW as 10/100 Mbit or Shall i use any other tool like ethtool for getting this. ethtool gives Speed: 10Mbps If so, how about, if i use some other Interfaces other than eth0, like ppp0 or some other? C''d anybody can give a suggestion over this? thanks

Good Day All Just 2 questions on htb 1,My Wan link is on eth1 and my Lan on eth0,where do I put my htb on?I want to limit web serving and ftp ens. 2.Im going to use the u32 filter.Can I use sub-netting for IP,i.o.w where src is can I do 192.168.1.0/24? Thanks and Please Help Eddie _______________________________________________ LARTC mailing list / LARTC@mailman.ds9a.nl