I am trying to build the latest release candidate and have run into a bit of a problem. When I run ./configure, I get: GlusterFS configure summary ==========================FUSE client : no Infiniband verbs : no epoll IO multiplex : yes Berkeley-DB : no libglusterfsclient : yes mod_glusterfs : no () argp-standalone : no I am going to need the gluster FUSE client now and ibverbs support in the near future. What's the correct incantation? Thanks! -- Matt
./configure --help On Sat, 2008-12-20 at 13:10 -0600, Matt Lawrence wrote:> I am trying to build the latest release candidate and have run into a > bit of a problem. > > When I run ./configure, I get: > > GlusterFS configure summary > ==========================> FUSE client : no > Infiniband verbs : no > epoll IO multiplex : yes > Berkeley-DB : no > libglusterfsclient : yes > mod_glusterfs : no () > argp-standalone : no > > > I am going to need the gluster FUSE client now and ibverbs support in > the near future. What's the correct incantation? > > Thanks! > > -- Matt > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
Matt Lawrence wrote:> I am trying to build the latest release candidate and have run into a > bit of a problem. > > When I run ./configure, I get: > > GlusterFS configure summary > ==========================> FUSE client : no > Infiniband verbs : no > epoll IO multiplex : yes > Berkeley-DB : no > libglusterfsclient : yes > mod_glusterfs : no () > argp-standalone : no >I'm answering my own question. In my case, the solution was to run "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to satisfy dependencies and then run "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without apxs_default". Minor problem when I went to install: -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file or directory error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet failed, exit status 127
Hi Stas, mod_glusterfs is for checking for apache module build directly with glusterfs build. But there is no lighttpd support at the moment at the configure level. Regards On 12/30/08, Stas Oskin <stas.oskin at gmail.com> wrote:> Hi. > > Yes, this is clear to me, as I built lighttpd modules in the past. > > What I'm asking about, is what the "mod_glusterfs" option means in configure > script? > > Regards. > > 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> > >> Hi Stas, >> >> Seperately means not even through the configure script. You need to >> copy >> the lighttpd files from glusterfs directory and copy it to actual lighttpd >> source directory >> and patch its Makefile using the *.diff provided under lighttpd directory >> from glusterfs >> Only then you will be able to build lighttpd glusterfs module. >> >> Regards >> >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin <stas.oskin at gmail.com> wrote: >> >>> Hi. >>> >>> If the lighttpd module needs to be compiled separately, what the the >>> lighttpd config option does in the ./configure script? >>> >>> Regards. >>> >>> 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> >>> >>> Hi Stas, >>>> >>>> Right now there are no such ways, you need to read the README inside >>>> the glusterfs lighttpd directory and copy the source files to lighttpd >>>> source directory and patch the Makefile using the diff provided and >>>> compile. >>>> Apart from that you can build RPMS for glusterfs and get it installed as >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd >>>> module >>>> of glusterfs to work as it depends on "libglusterfsclient" >>>> >>>> Regards >>>> >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin <stas.oskin at gmail.com>wrote: >>>> >>>>> Hi. >>>>> >>>>> I'm just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone knows >>>>> of >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? >>>>> >>>>> Regards. >>>>> >>>>> 2008/12/21 Harshavardhana Ranganath <harsha at zresearch.com> >>>>> >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs >>>>>> >>>>>> should work for you. Let us know if you get any issue. >>>>>> >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence <matt.lawrence at tamu.edu >>>>>> > wrote: >>>>>> >>>>>>> Harshavardhana Ranganath wrote: >>>>>>> >>>>>>>> * Replies inline * >>>>>>>> >>>>>>>> >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < >>>>>>>> matt.lawrence at tamu.edu <mailto:matt.lawrence at tamu.edu>> wrote: >>>>>>>> >>>>>>>> Matt Lawrence wrote: >>>>>>>> > I am trying to build the latest release candidate and have run >>>>>>>> into a >>>>>>>> > bit of a problem. >>>>>>>> > >>>>>>>> > When I run ./configure, I get: >>>>>>>> > >>>>>>>> > GlusterFS configure summary >>>>>>>> > ==========================>>>>>>>> > FUSE client : no >>>>>>>> > Infiniband verbs : no >>>>>>>> > epoll IO multiplex : yes >>>>>>>> > Berkeley-DB : no >>>>>>>> > libglusterfsclient : yes >>>>>>>> > mod_glusterfs : no () >>>>>>>> > argp-standalone : no >>>>>>>> > >>>>>>>> I'm answering my own question. In my case, the solution was to >>>>>>>> run >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to >>>>>>>> satisfy >>>>>>>> dependencies and then run "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz >>>>>>>> --without apxs_default". >>>>>>>> >>>>>>>> Minor problem when I went to install: >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file or directory >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet failed, exit >>>>>>>> status 127 >>>>>>>> >>>>>>>> rpmbuild "--without apxs_default" needs to be used in conjunction >>>>>>>> with "--define apxs_path /usr/local/apache" >>>>>>>> if you have "apxs" installed in standard path then such an option is >>>>>>>> not required. Also look inside glusterfs.spec file inside tarball >>>>>>>> for more >>>>>>>> information on glusterfs specific rpmbuild command line parameters >>>>>>>> >>>>>>> >>>>>>> I looked in the spec file, but I'm a novice at them. How do I build >>>>>>> a >>>>>>> glusterfs rpm without any apache support? >>>>>>> >>>>>>> -- Matt >>>>>>> >>>>>> >>>>>> >>>>>> >>>>>> -- >>>>>> Harshavardhana >>>>>> [y4m4 on #gluster at irc.freenode.net] >>>>>> "Samudaya TantraShilpi" >>>>>> Z Research Inc - http://www.zresearch.com >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> Gluster-users mailing list >>>>>> Gluster-users at gluster.org >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users >>>>>> >>>>>> >>>>> >>>> >>>> >>>> -- >>>> Harshavardhana >>>> [y4m4 on #gluster at irc.freenode.net] >>>> "Samudaya TantraShilpi" >>>> Z Research Inc - http://www.zresearch.com >>>> >>>> >> >> >> -- >> Harshavardhana >> [y4m4 on #gluster at irc.freenode.net] >> "Samudaya TantraShilpi" >> Z Research Inc - http://www.zresearch.com >> >> >-- Harshavardhana [y4m4 on #gluster at irc.freenode.net] "Samudaya TantraShilpi" Z Research Inc - http://www.zresearch.com
is there documentation for the apache mod? or a sample of how to configure it in httpd.conf? also, make install doesn''t install it to the apache directory, which I suppose is fine, but I had to search for the thing which, for a lazy person such as myself, is undesirable :) At 10:59 PM 12/29/2008, Harshavardhana Ranganath wrote:>Hi Stas, > > mod_glusterfs is for checking for apache module build directly >with glusterfs build. But there is no lighttpd support at the moment >at the configure level. > >Regards >On 12/30/08, Stas Oskin <stas.oskin at gmail.com> wrote: > > Hi. > > > > Yes, this is clear to me, as I built lighttpd modules in the past. > > > > What I''m asking about, is what the "mod_glusterfs" option means > in configure > > script? > > > > Regards. > > > > 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> > > > >> Hi Stas, > >> > >> Seperately means not even through the configure script. You need to > >> copy > >> the lighttpd files from glusterfs directory and copy it to actual lighttpd > >> source directory > >> and patch its Makefile using the *.diff provided under lighttpd directory > >> from glusterfs > >> Only then you will be able to build lighttpd glusterfs module. > >> > >> Regards > >> > >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin <stas.oskin at gmail.com> wrote: > >> > >>> Hi. > >>> > >>> If the lighttpd module needs to be compiled separately, what the the > >>> lighttpd config option does in the ./configure script? > >>> > >>> Regards. > >>> > >>> 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> > >>> > >>> Hi Stas, > >>>> > >>>> Right now there are no such ways, you need to read the README inside > >>>> the glusterfs lighttpd directory and copy the source files to lighttpd > >>>> source directory and patch the Makefile using the diff provided and > >>>> compile. > >>>> Apart from that you can build RPMS for glusterfs and get it installed as > >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd > >>>> module > >>>> of glusterfs to work as it depends on "libglusterfsclient" > >>>> > >>>> Regards > >>>> > >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin <stas.oskin at gmail.com>wrote: > >>>> > >>>>> Hi. > >>>>> > >>>>> I''m just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone knows > >>>>> of > >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? > >>>>> > >>>>> Regards. > >>>>> > >>>>> 2008/12/21 Harshavardhana Ranganath <harsha at zresearch.com> > >>>>> > >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs > >>>>>> > >>>>>> should work for you. Let us know if you get any issue. > >>>>>> > >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence <matt.lawrence at tamu.edu > >>>>>> > wrote: > >>>>>> > >>>>>>> Harshavardhana Ranganath wrote: > >>>>>>> > >>>>>>>> * Replies inline * > >>>>>>>> > >>>>>>>> > >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < > >>>>>>>> matt.lawrence at tamu.edu <mailto:matt.lawrence at tamu.edu>> wrote: > >>>>>>>> > >>>>>>>> Matt Lawrence wrote: > >>>>>>>> > I am trying to build the latest release candidate and have run > >>>>>>>> into a > >>>>>>>> > bit of a problem. > >>>>>>>> > > >>>>>>>> > When I run ./configure, I get: > >>>>>>>> > > >>>>>>>> > GlusterFS configure summary > >>>>>>>> > ==========================> >>>>>>>> > FUSE client : no > >>>>>>>> > Infiniband verbs : no > >>>>>>>> > epoll IO multiplex : yes > >>>>>>>> > Berkeley-DB : no > >>>>>>>> > libglusterfsclient : yes > >>>>>>>> > mod_glusterfs : no () > >>>>>>>> > argp-standalone : no > >>>>>>>> > > >>>>>>>> I''m answering my own question. In my case, the solution was to > >>>>>>>> run > >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to > >>>>>>>> satisfy > >>>>>>>> dependencies and then run "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz > >>>>>>>> --without apxs_default". > >>>>>>>> > >>>>>>>> Minor problem when I went to install: > >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm > >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file or directory > >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet failed, exit > >>>>>>>> status 127 > >>>>>>>> > >>>>>>>> rpmbuild "--without apxs_default" needs to be used in conjunction > >>>>>>>> with "--define apxs_path /usr/local/apache" > >>>>>>>> if you have "apxs" installed in standard path then such an option is > >>>>>>>> not required. Also look inside glusterfs.spec file inside tarball > >>>>>>>> for more > >>>>>>>> information on glusterfs specific rpmbuild command line parameters > >>>>>>>> > >>>>>>> > >>>>>>> I looked in the spec file, but I''m a novice at them. How do I build > >>>>>>> a > >>>>>>> glusterfs rpm without any apache support? > >>>>>>> > >>>>>>> -- Matt > >>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- > >>>>>> Harshavardhana > >>>>>> [y4m4 on #gluster at irc.freenode.net] > >>>>>> "Samudaya TantraShilpi" > >>>>>> Z Research Inc - http://www.zresearch.com > >>>>>> > >>>>>> > >>>>>> _______________________________________________ > >>>>>> Gluster-users mailing list > >>>>>> Gluster-users at gluster.org > >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > >>>>>> > >>>>>> > >>>>> > >>>> > >>>> > >>>> -- > >>>> Harshavardhana > >>>> [y4m4 on #gluster at irc.freenode.net] > >>>> "Samudaya TantraShilpi" > >>>> Z Research Inc - http://www.zresearch.com > >>>> > >>>> > >> > >> > >> -- > >> Harshavardhana > >> [y4m4 on #gluster at irc.freenode.net] > >> "Samudaya TantraShilpi" > >> Z Research Inc - http://www.zresearch.com > >> > >> > > > > >-- >Harshavardhana >[y4m4 on #gluster at irc.freenode.net] >"Samudaya TantraShilpi" >Z Research Inc - http://www.zresearch.com > >_______________________________________________ >Gluster-users mailing list >Gluster-users at gluster.org >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
is there documentation for the apache mod? or a sample of how to configure it in httpd.conf? also, make install doesn''t install it to the apache directory, which I suppose is fine, but I had to search for the thing which, for a lazy person such as myself, is undesirable :) At 10:59 PM 12/29/2008, Harshavardhana Ranganath wrote:>Hi Stas, > > mod_glusterfs is for checking for apache module build directly >with glusterfs build. But there is no lighttpd support at the moment >at the configure level. > >Regards >On 12/30/08, Stas Oskin <stas.oskin at gmail.com> wrote: > > Hi. > > > > Yes, this is clear to me, as I built lighttpd modules in the past. > > > > What I''m asking about, is what the "mod_glusterfs" option means > in configure > > script? > > > > Regards. > > > > 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> > > > >> Hi Stas, > >> > >> Seperately means not even through the configure script. You need to > >> copy > >> the lighttpd files from glusterfs directory and copy it to actual lighttpd > >> source directory > >> and patch its Makefile using the *.diff provided under lighttpd directory > >> from glusterfs > >> Only then you will be able to build lighttpd glusterfs module. > >> > >> Regards > >> > >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin <stas.oskin at gmail.com> wrote: > >> > >>> Hi. > >>> > >>> If the lighttpd module needs to be compiled separately, what the the > >>> lighttpd config option does in the ./configure script? > >>> > >>> Regards. > >>> > >>> 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> > >>> > >>> Hi Stas, > >>>> > >>>> Right now there are no such ways, you need to read the README inside > >>>> the glusterfs lighttpd directory and copy the source files to lighttpd > >>>> source directory and patch the Makefile using the diff provided and > >>>> compile. > >>>> Apart from that you can build RPMS for glusterfs and get it installed as > >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd > >>>> module > >>>> of glusterfs to work as it depends on "libglusterfsclient" > >>>> > >>>> Regards > >>>> > >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin <stas.oskin at gmail.com>wrote: > >>>> > >>>>> Hi. > >>>>> > >>>>> I''m just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone knows > >>>>> of > >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? > >>>>> > >>>>> Regards. > >>>>> > >>>>> 2008/12/21 Harshavardhana Ranganath <harsha at zresearch.com> > >>>>> > >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs > >>>>>> > >>>>>> should work for you. Let us know if you get any issue. > >>>>>> > >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence <matt.lawrence at tamu.edu > >>>>>> > wrote: > >>>>>> > >>>>>>> Harshavardhana Ranganath wrote: > >>>>>>> > >>>>>>>> * Replies inline * > >>>>>>>> > >>>>>>>> > >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < > >>>>>>>> matt.lawrence at tamu.edu <mailto:matt.lawrence at tamu.edu>> wrote: > >>>>>>>> > >>>>>>>> Matt Lawrence wrote: > >>>>>>>> > I am trying to build the latest release candidate and have run > >>>>>>>> into a > >>>>>>>> > bit of a problem. > >>>>>>>> > > >>>>>>>> > When I run ./configure, I get: > >>>>>>>> > > >>>>>>>> > GlusterFS configure summary > >>>>>>>> > ==========================> >>>>>>>> > FUSE client : no > >>>>>>>> > Infiniband verbs : no > >>>>>>>> > epoll IO multiplex : yes > >>>>>>>> > Berkeley-DB : no > >>>>>>>> > libglusterfsclient : yes > >>>>>>>> > mod_glusterfs : no () > >>>>>>>> > argp-standalone : no > >>>>>>>> > > >>>>>>>> I''m answering my own question. In my case, the solution was to > >>>>>>>> run > >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to > >>>>>>>> satisfy > >>>>>>>> dependencies and then run "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz > >>>>>>>> --without apxs_default". > >>>>>>>> > >>>>>>>> Minor problem when I went to install: > >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm > >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file or directory > >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet failed, exit > >>>>>>>> status 127 > >>>>>>>> > >>>>>>>> rpmbuild "--without apxs_default" needs to be used in conjunction > >>>>>>>> with "--define apxs_path /usr/local/apache" > >>>>>>>> if you have "apxs" installed in standard path then such an option is > >>>>>>>> not required. Also look inside glusterfs.spec file inside tarball > >>>>>>>> for more > >>>>>>>> information on glusterfs specific rpmbuild command line parameters > >>>>>>>> > >>>>>>> > >>>>>>> I looked in the spec file, but I''m a novice at them. How do I build > >>>>>>> a > >>>>>>> glusterfs rpm without any apache support? > >>>>>>> > >>>>>>> -- Matt > >>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- > >>>>>> Harshavardhana > >>>>>> [y4m4 on #gluster at irc.freenode.net] > >>>>>> "Samudaya TantraShilpi" > >>>>>> Z Research Inc - http://www.zresearch.com > >>>>>> > >>>>>> > >>>>>> _______________________________________________ > >>>>>> Gluster-users mailing list > >>>>>> Gluster-users at gluster.org > >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > >>>>>> > >>>>>> > >>>>> > >>>> > >>>> > >>>> -- > >>>> Harshavardhana > >>>> [y4m4 on #gluster at irc.freenode.net] > >>>> "Samudaya TantraShilpi" > >>>> Z Research Inc - http://www.zresearch.com > >>>> > >>>> > >> > >> > >> -- > >> Harshavardhana > >> [y4m4 on #gluster at irc.freenode.net] > >> "Samudaya TantraShilpi" > >> Z Research Inc - http://www.zresearch.com > >> > >> > > > > >-- >Harshavardhana >[y4m4 on #gluster at irc.freenode.net] >"Samudaya TantraShilpi" >Z Research Inc - http://www.zresearch.com > >_______________________________________________ >Gluster-users mailing list >Gluster-users at gluster.org >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
is there documentation for the apache mod? or a sample of how to configure it in httpd.conf? also, make install doesn''t install it to the apache directory, which I suppose is fine, but I had to search for the thing which, for a lazy person such as myself, is undesirable :) At 10:59 PM 12/29/2008, Harshavardhana Ranganath wrote:>Hi Stas, > > mod_glusterfs is for checking for apache module build directly >with glusterfs build. But there is no lighttpd support at the moment >at the configure level. > >Regards >On 12/30/08, Stas Oskin <stas.oskin at gmail.com> wrote: > > Hi. > > > > Yes, this is clear to me, as I built lighttpd modules in the past. > > > > What I''m asking about, is what the "mod_glusterfs" option means > in configure > > script? > > > > Regards. > > > > 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> > > > >> Hi Stas, > >> > >> Seperately means not even through the configure script. You need to > >> copy > >> the lighttpd files from glusterfs directory and copy it to actual lighttpd > >> source directory > >> and patch its Makefile using the *.diff provided under lighttpd directory > >> from glusterfs > >> Only then you will be able to build lighttpd glusterfs module. > >> > >> Regards > >> > >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin <stas.oskin at gmail.com> wrote: > >> > >>> Hi. > >>> > >>> If the lighttpd module needs to be compiled separately, what the the > >>> lighttpd config option does in the ./configure script? > >>> > >>> Regards. > >>> > >>> 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> > >>> > >>> Hi Stas, > >>>> > >>>> Right now there are no such ways, you need to read the README inside > >>>> the glusterfs lighttpd directory and copy the source files to lighttpd > >>>> source directory and patch the Makefile using the diff provided and > >>>> compile. > >>>> Apart from that you can build RPMS for glusterfs and get it installed as > >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd > >>>> module > >>>> of glusterfs to work as it depends on "libglusterfsclient" > >>>> > >>>> Regards > >>>> > >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin <stas.oskin at gmail.com>wrote: > >>>> > >>>>> Hi. > >>>>> > >>>>> I''m just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone knows > >>>>> of > >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? > >>>>> > >>>>> Regards. > >>>>> > >>>>> 2008/12/21 Harshavardhana Ranganath <harsha at zresearch.com> > >>>>> > >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs > >>>>>> > >>>>>> should work for you. Let us know if you get any issue. > >>>>>> > >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence <matt.lawrence at tamu.edu > >>>>>> > wrote: > >>>>>> > >>>>>>> Harshavardhana Ranganath wrote: > >>>>>>> > >>>>>>>> * Replies inline * > >>>>>>>> > >>>>>>>> > >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < > >>>>>>>> matt.lawrence at tamu.edu <mailto:matt.lawrence at tamu.edu>> wrote: > >>>>>>>> > >>>>>>>> Matt Lawrence wrote: > >>>>>>>> > I am trying to build the latest release candidate and have run > >>>>>>>> into a > >>>>>>>> > bit of a problem. > >>>>>>>> > > >>>>>>>> > When I run ./configure, I get: > >>>>>>>> > > >>>>>>>> > GlusterFS configure summary > >>>>>>>> > ==========================> >>>>>>>> > FUSE client : no > >>>>>>>> > Infiniband verbs : no > >>>>>>>> > epoll IO multiplex : yes > >>>>>>>> > Berkeley-DB : no > >>>>>>>> > libglusterfsclient : yes > >>>>>>>> > mod_glusterfs : no () > >>>>>>>> > argp-standalone : no > >>>>>>>> > > >>>>>>>> I''m answering my own question. In my case, the solution was to > >>>>>>>> run > >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to > >>>>>>>> satisfy > >>>>>>>> dependencies and then run "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz > >>>>>>>> --without apxs_default". > >>>>>>>> > >>>>>>>> Minor problem when I went to install: > >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm > >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file or directory > >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet failed, exit > >>>>>>>> status 127 > >>>>>>>> > >>>>>>>> rpmbuild "--without apxs_default" needs to be used in conjunction > >>>>>>>> with "--define apxs_path /usr/local/apache" > >>>>>>>> if you have "apxs" installed in standard path then such an option is > >>>>>>>> not required. Also look inside glusterfs.spec file inside tarball > >>>>>>>> for more > >>>>>>>> information on glusterfs specific rpmbuild command line parameters > >>>>>>>> > >>>>>>> > >>>>>>> I looked in the spec file, but I''m a novice at them. How do I build > >>>>>>> a > >>>>>>> glusterfs rpm without any apache support? > >>>>>>> > >>>>>>> -- Matt > >>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- > >>>>>> Harshavardhana > >>>>>> [y4m4 on #gluster at irc.freenode.net] > >>>>>> "Samudaya TantraShilpi" > >>>>>> Z Research Inc - http://www.zresearch.com > >>>>>> > >>>>>> > >>>>>> _______________________________________________ > >>>>>> Gluster-users mailing list > >>>>>> Gluster-users at gluster.org > >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > >>>>>> > >>>>>> > >>>>> > >>>> > >>>> > >>>> -- > >>>> Harshavardhana > >>>> [y4m4 on #gluster at irc.freenode.net] > >>>> "Samudaya TantraShilpi" > >>>> Z Research Inc - http://www.zresearch.com > >>>> > >>>> > >> > >> > >> -- > >> Harshavardhana > >> [y4m4 on #gluster at irc.freenode.net] > >> "Samudaya TantraShilpi" > >> Z Research Inc - http://www.zresearch.com > >> > >> > > > > >-- >Harshavardhana >[y4m4 on #gluster at irc.freenode.net] >"Samudaya TantraShilpi" >Z Research Inc - http://www.zresearch.com > >_______________________________________________ >Gluster-users mailing list >Gluster-users at gluster.org >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users
Hi Kieth, All you need to do is read inside the GlusterFS source "mod_glusterfs/apache/1.3/src/README.txt" or ask raghavendra at zresearch.com Regards On Tue, Dec 30, 2008 at 1:08 PM, Keith Freedman <freedman at freeformit.com>wrote:> is there documentation for the apache mod? > or a sample of how to configure it in httpd.conf? > > also, make install doesn't install it to the apache directory, which I > suppose is fine, but I had to search for the thing which, for a lazy person > such as myself, is undesirable :) > > > At 10:59 PM 12/29/2008, Harshavardhana Ranganath wrote: > >> Hi Stas, >> >> mod_glusterfs is for checking for apache module build directly >> with glusterfs build. But there is no lighttpd support at the moment >> at the configure level. >> >> Regards >> On 12/30/08, Stas Oskin <stas.oskin at gmail.com> wrote: >> > Hi. >> > >> > Yes, this is clear to me, as I built lighttpd modules in the past. >> > >> > What I'm asking about, is what the "mod_glusterfs" option means in >> configure >> > script? >> > >> > Regards. >> > >> > 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> >> > >> >> Hi Stas, >> >> >> >> Seperately means not even through the configure script. You need to >> >> copy >> >> the lighttpd files from glusterfs directory and copy it to actual >> lighttpd >> >> source directory >> >> and patch its Makefile using the *.diff provided under lighttpd >> directory >> >> from glusterfs >> >> Only then you will be able to build lighttpd glusterfs module. >> >> >> >> Regards >> >> >> >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin <stas.oskin at gmail.com> >> wrote: >> >> >> >>> Hi. >> >>> >> >>> If the lighttpd module needs to be compiled separately, what the the >> >>> lighttpd config option does in the ./configure script? >> >>> >> >>> Regards. >> >>> >> >>> 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> >> >>> >> >>> Hi Stas, >> >>>> >> >>>> Right now there are no such ways, you need to read the README >> inside >> >>>> the glusterfs lighttpd directory and copy the source files to >> lighttpd >> >>>> source directory and patch the Makefile using the diff provided and >> >>>> compile. >> >>>> Apart from that you can build RPMS for glusterfs and get it installed >> as >> >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd >> >>>> module >> >>>> of glusterfs to work as it depends on "libglusterfsclient" >> >>>> >> >>>> Regards >> >>>> >> >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin <stas.oskin at gmail.com >> >wrote: >> >>>> >> >>>>> Hi. >> >>>>> >> >>>>> I'm just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone >> knows >> >>>>> of >> >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? >> >>>>> >> >>>>> Regards. >> >>>>> >> >>>>> 2008/12/21 Harshavardhana Ranganath <harsha at zresearch.com> >> >>>>> >> >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs >> >>>>>> >> >>>>>> should work for you. Let us know if you get any issue. >> >>>>>> >> >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence < >> matt.lawrence at tamu.edu >> >>>>>> > wrote: >> >>>>>> >> >>>>>>> Harshavardhana Ranganath wrote: >> >>>>>>> >> >>>>>>>> * Replies inline * >> >>>>>>>> >> >>>>>>>> >> >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < >> >>>>>>>> matt.lawrence at tamu.edu <mailto:matt.lawrence at tamu.edu>> wrote: >> >>>>>>>> >> >>>>>>>> Matt Lawrence wrote: >> >>>>>>>> > I am trying to build the latest release candidate and have >> run >> >>>>>>>> into a >> >>>>>>>> > bit of a problem. >> >>>>>>>> > >> >>>>>>>> > When I run ./configure, I get: >> >>>>>>>> > >> >>>>>>>> > GlusterFS configure summary >> >>>>>>>> > ==========================>> >>>>>>>> > FUSE client : no >> >>>>>>>> > Infiniband verbs : no >> >>>>>>>> > epoll IO multiplex : yes >> >>>>>>>> > Berkeley-DB : no >> >>>>>>>> > libglusterfsclient : yes >> >>>>>>>> > mod_glusterfs : no () >> >>>>>>>> > argp-standalone : no >> >>>>>>>> > >> >>>>>>>> I'm answering my own question. In my case, the solution was >> to >> >>>>>>>> run >> >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to >> >>>>>>>> satisfy >> >>>>>>>> dependencies and then run "rpmbuild -ta >> glusterfs-1.4.0rc6.tar.gz >> >>>>>>>> --without apxs_default". >> >>>>>>>> >> >>>>>>>> Minor problem when I went to install: >> >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm >> >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file or >> directory >> >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet failed, >> exit >> >>>>>>>> status 127 >> >>>>>>>> >> >>>>>>>> rpmbuild "--without apxs_default" needs to be used in >> conjunction >> >>>>>>>> with "--define apxs_path /usr/local/apache" >> >>>>>>>> if you have "apxs" installed in standard path then such an option >> is >> >>>>>>>> not required. Also look inside glusterfs.spec file inside tarball >> >>>>>>>> for more >> >>>>>>>> information on glusterfs specific rpmbuild command line >> parameters >> >>>>>>>> >> >>>>>>> >> >>>>>>> I looked in the spec file, but I'm a novice at them. How do I >> build >> >>>>>>> a >> >>>>>>> glusterfs rpm without any apache support? >> >>>>>>> >> >>>>>>> -- Matt >> >>>>>>> >> >>>>>> >> >>>>>> >> >>>>>> >> >>>>>> -- >> >>>>>> Harshavardhana >> >>>>>> [y4m4 on #gluster at irc.freenode.net] >> >>>>>> "Samudaya TantraShilpi" >> >>>>>> Z Research Inc - http://www.zresearch.com >> >>>>>> >> >>>>>> >> >>>>>> _______________________________________________ >> >>>>>> Gluster-users mailing list >> >>>>>> Gluster-users at gluster.org >> >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users >> >>>>>> >> >>>>>> >> >>>>> >> >>>> >> >>>> >> >>>> -- >> >>>> Harshavardhana >> >>>> [y4m4 on #gluster at irc.freenode.net] >> >>>> "Samudaya TantraShilpi" >> >>>> Z Research Inc - http://www.zresearch.com >> >>>> >> >>>> >> >> >> >> >> >> -- >> >> Harshavardhana >> >> [y4m4 on #gluster at irc.freenode.net] >> >> "Samudaya TantraShilpi" >> >> Z Research Inc - http://www.zresearch.com >> >> >> >> >> > >> >> >> -- >> Harshavardhana >> [y4m4 on #gluster at irc.freenode.net] >> "Samudaya TantraShilpi" >> Z Research Inc - http://www.zresearch.com >> >> _______________________________________________ >> Gluster-users mailing list >> Gluster-users at gluster.org >> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users >> > >-- Harshavardhana [y4m4 on #gluster at irc.freenode.net] "Samudaya TantraShilpi" Z Research Inc - http://www.zresearch.com -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20081230/4c4a849c/attachment.html>
ok.. that works. I was looking in the 2.2 directory, my bad :) At 07:20 AM 12/30/2008, Harshavardhana Ranganath wrote:>Hi Kieth, > > All you need to do is read inside the GlusterFS source > "mod_glusterfs/apache/1.3/src/README.txt" or ask > <mailto:raghavendra at zresearch.com>raghavendra at zresearch.com > >Regards >On Tue, Dec 30, 2008 at 1:08 PM, Keith Freedman ><<mailto:freedman at freeformit.com>freedman at freeformit.com> wrote: >is there documentation for the apache mod? >or a sample of how to configure it in httpd.conf? > >also, make install doesn''t install it to the apache directory, which >I suppose is fine, but I had to search for the thing which, for a >lazy person such as myself, is undesirable :) > > >At 10:59 PM 12/29/2008, Harshavardhana Ranganath wrote: >Hi Stas, > > mod_glusterfs is for checking for apache module build directly >with glusterfs build. But there is no lighttpd support at the moment >at the configure level. > >Regards >On 12/30/08, Stas Oskin ><<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > > Hi. > > > > Yes, this is clear to me, as I built lighttpd modules in the past. > > > > What I''m asking about, is what the "mod_glusterfs" option means > in configure > > script? > > > > Regards. > > > > 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > > >> Hi Stas, > >> > >> Seperately means not even through the configure script. You need to > >> copy > >> the lighttpd files from glusterfs directory and copy it to actual lighttpd > >> source directory > >> and patch its Makefile using the *.diff provided under lighttpd directory > >> from glusterfs > >> Only then you will be able to build lighttpd glusterfs module. > >> > >> Regards > >> > >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > >> > >>> Hi. > >>> > >>> If the lighttpd module needs to be compiled separately, what the the > >>> lighttpd config option does in the ./configure script? > >>> > >>> Regards. > >>> > >>> 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > >>> > >>> Hi Stas, > >>>> > >>>> Right now there are no such ways, you need to read the README inside > >>>> the glusterfs lighttpd directory and copy the source files to lighttpd > >>>> source directory and patch the Makefile using the diff provided and > >>>> compile. > >>>> Apart from that you can build RPMS for glusterfs and get it installed as > >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd > >>>> module > >>>> of glusterfs to work as it depends on "libglusterfsclient" > >>>> > >>>> Regards > >>>> > >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com>wrote: > >>>> > >>>>> Hi. > >>>>> > >>>>> I''m just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone knows > >>>>> of > >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? > >>>>> > >>>>> Regards. > >>>>> > >>>>> 2008/12/21 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > >>>>> > >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs > >>>>>> > >>>>>> should work for you. Let us know if you get any issue. > >>>>>> > >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence > <<mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > >>>>>> > wrote: > >>>>>> > >>>>>>> Harshavardhana Ranganath wrote: > >>>>>>> > >>>>>>>> * Replies inline * > >>>>>>>> > >>>>>>>> > >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < > >>>>>>>> <mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > <mailto:matt.lawrence at tamu.edu>> wrote: > >>>>>>>> > >>>>>>>> Matt Lawrence wrote: > >>>>>>>> > I am trying to build the latest release candidate and have run > >>>>>>>> into a > >>>>>>>> > bit of a problem. > >>>>>>>> > > >>>>>>>> > When I run ./configure, I get: > >>>>>>>> > > >>>>>>>> > GlusterFS configure summary > >>>>>>>> > ==========================> >>>>>>>> > FUSE client : no > >>>>>>>> > Infiniband verbs : no > >>>>>>>> > epoll IO multiplex : yes > >>>>>>>> > Berkeley-DB : no > >>>>>>>> > libglusterfsclient : yes > >>>>>>>> > mod_glusterfs : no () > >>>>>>>> > argp-standalone : no > >>>>>>>> > > >>>>>>>> I''m answering my own question. In my case, the solution was to > >>>>>>>> run > >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to > >>>>>>>> satisfy > >>>>>>>> dependencies and then run "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz > >>>>>>>> --without apxs_default". > >>>>>>>> > >>>>>>>> Minor problem when I went to install: > >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm > >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file or directory > >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet failed, exit > >>>>>>>> status 127 > >>>>>>>> > >>>>>>>> rpmbuild "--without apxs_default" needs to be used in conjunction > >>>>>>>> with "--define apxs_path /usr/local/apache" > >>>>>>>> if you have "apxs" installed in standard path then such an option is > >>>>>>>> not required. Also look inside glusterfs.spec file inside tarball > >>>>>>>> for more > >>>>>>>> information on glusterfs specific rpmbuild command line parameters > >>>>>>>> > >>>>>>> > >>>>>>> I looked in the spec file, but I''m a novice at them. How do I build > >>>>>>> a > >>>>>>> glusterfs rpm without any apache support? > >>>>>>> > >>>>>>> -- Matt > >>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- > >>>>>> Harshavardhana > >>>>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >>>>>> "Samudaya TantraShilpi" > >>>>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >>>>>> > >>>>>> > >>>>>> _______________________________________________ > >>>>>> Gluster-users mailing list > >>>>>> <mailto:Gluster-users at gluster.org>Gluster-users at gluster.org > >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > >>>>>> > >>>>>> > >>>>> > >>>> > >>>> > >>>> -- > >>>> Harshavardhana > >>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >>>> "Samudaya TantraShilpi" > >>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >>>> > >>>> > >> > >> > >> -- > >> Harshavardhana > >> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >> "Samudaya TantraShilpi" > >> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >> > >> > > > > >-- >Harshavardhana >[y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] >"Samudaya TantraShilpi" >Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >_______________________________________________ >Gluster-users mailing list ><mailto:Gluster-users at gluster.org>Gluster-users at gluster.org >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > > >-- >Harshavardhana >[y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] >"Samudaya TantraShilpi" >Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com
ok.. that works. I was looking in the 2.2 directory, my bad :) At 07:20 AM 12/30/2008, Harshavardhana Ranganath wrote:>Hi Kieth, > > All you need to do is read inside the GlusterFS source > "mod_glusterfs/apache/1.3/src/README.txt" or ask > <mailto:raghavendra at zresearch.com>raghavendra at zresearch.com > >Regards >On Tue, Dec 30, 2008 at 1:08 PM, Keith Freedman ><<mailto:freedman at freeformit.com>freedman at freeformit.com> wrote: >is there documentation for the apache mod? >or a sample of how to configure it in httpd.conf? > >also, make install doesn''t install it to the apache directory, which >I suppose is fine, but I had to search for the thing which, for a >lazy person such as myself, is undesirable :) > > >At 10:59 PM 12/29/2008, Harshavardhana Ranganath wrote: >Hi Stas, > > mod_glusterfs is for checking for apache module build directly >with glusterfs build. But there is no lighttpd support at the moment >at the configure level. > >Regards >On 12/30/08, Stas Oskin ><<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > > Hi. > > > > Yes, this is clear to me, as I built lighttpd modules in the past. > > > > What I''m asking about, is what the "mod_glusterfs" option means > in configure > > script? > > > > Regards. > > > > 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > > >> Hi Stas, > >> > >> Seperately means not even through the configure script. You need to > >> copy > >> the lighttpd files from glusterfs directory and copy it to actual lighttpd > >> source directory > >> and patch its Makefile using the *.diff provided under lighttpd directory > >> from glusterfs > >> Only then you will be able to build lighttpd glusterfs module. > >> > >> Regards > >> > >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > >> > >>> Hi. > >>> > >>> If the lighttpd module needs to be compiled separately, what the the > >>> lighttpd config option does in the ./configure script? > >>> > >>> Regards. > >>> > >>> 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > >>> > >>> Hi Stas, > >>>> > >>>> Right now there are no such ways, you need to read the README inside > >>>> the glusterfs lighttpd directory and copy the source files to lighttpd > >>>> source directory and patch the Makefile using the diff provided and > >>>> compile. > >>>> Apart from that you can build RPMS for glusterfs and get it installed as > >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd > >>>> module > >>>> of glusterfs to work as it depends on "libglusterfsclient" > >>>> > >>>> Regards > >>>> > >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com>wrote: > >>>> > >>>>> Hi. > >>>>> > >>>>> I''m just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone knows > >>>>> of > >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? > >>>>> > >>>>> Regards. > >>>>> > >>>>> 2008/12/21 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > >>>>> > >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs > >>>>>> > >>>>>> should work for you. Let us know if you get any issue. > >>>>>> > >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence > <<mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > >>>>>> > wrote: > >>>>>> > >>>>>>> Harshavardhana Ranganath wrote: > >>>>>>> > >>>>>>>> * Replies inline * > >>>>>>>> > >>>>>>>> > >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < > >>>>>>>> <mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > <mailto:matt.lawrence at tamu.edu>> wrote: > >>>>>>>> > >>>>>>>> Matt Lawrence wrote: > >>>>>>>> > I am trying to build the latest release candidate and have run > >>>>>>>> into a > >>>>>>>> > bit of a problem. > >>>>>>>> > > >>>>>>>> > When I run ./configure, I get: > >>>>>>>> > > >>>>>>>> > GlusterFS configure summary > >>>>>>>> > ==========================> >>>>>>>> > FUSE client : no > >>>>>>>> > Infiniband verbs : no > >>>>>>>> > epoll IO multiplex : yes > >>>>>>>> > Berkeley-DB : no > >>>>>>>> > libglusterfsclient : yes > >>>>>>>> > mod_glusterfs : no () > >>>>>>>> > argp-standalone : no > >>>>>>>> > > >>>>>>>> I''m answering my own question. In my case, the solution was to > >>>>>>>> run > >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to > >>>>>>>> satisfy > >>>>>>>> dependencies and then run "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz > >>>>>>>> --without apxs_default". > >>>>>>>> > >>>>>>>> Minor problem when I went to install: > >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm > >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file or directory > >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet failed, exit > >>>>>>>> status 127 > >>>>>>>> > >>>>>>>> rpmbuild "--without apxs_default" needs to be used in conjunction > >>>>>>>> with "--define apxs_path /usr/local/apache" > >>>>>>>> if you have "apxs" installed in standard path then such an option is > >>>>>>>> not required. Also look inside glusterfs.spec file inside tarball > >>>>>>>> for more > >>>>>>>> information on glusterfs specific rpmbuild command line parameters > >>>>>>>> > >>>>>>> > >>>>>>> I looked in the spec file, but I''m a novice at them. How do I build > >>>>>>> a > >>>>>>> glusterfs rpm without any apache support? > >>>>>>> > >>>>>>> -- Matt > >>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- > >>>>>> Harshavardhana > >>>>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >>>>>> "Samudaya TantraShilpi" > >>>>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >>>>>> > >>>>>> > >>>>>> _______________________________________________ > >>>>>> Gluster-users mailing list > >>>>>> <mailto:Gluster-users at gluster.org>Gluster-users at gluster.org > >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > >>>>>> > >>>>>> > >>>>> > >>>> > >>>> > >>>> -- > >>>> Harshavardhana > >>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >>>> "Samudaya TantraShilpi" > >>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >>>> > >>>> > >> > >> > >> -- > >> Harshavardhana > >> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >> "Samudaya TantraShilpi" > >> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >> > >> > > > > >-- >Harshavardhana >[y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] >"Samudaya TantraShilpi" >Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >_______________________________________________ >Gluster-users mailing list ><mailto:Gluster-users at gluster.org>Gluster-users at gluster.org >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > > >-- >Harshavardhana >[y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] >"Samudaya TantraShilpi" >Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com
ok.. that works. I was looking in the 2.2 directory, my bad :) At 07:20 AM 12/30/2008, Harshavardhana Ranganath wrote:>Hi Kieth, > > All you need to do is read inside the GlusterFS source > "mod_glusterfs/apache/1.3/src/README.txt" or ask > <mailto:raghavendra at zresearch.com>raghavendra at zresearch.com > >Regards >On Tue, Dec 30, 2008 at 1:08 PM, Keith Freedman ><<mailto:freedman at freeformit.com>freedman at freeformit.com> wrote: >is there documentation for the apache mod? >or a sample of how to configure it in httpd.conf? > >also, make install doesn''t install it to the apache directory, which >I suppose is fine, but I had to search for the thing which, for a >lazy person such as myself, is undesirable :) > > >At 10:59 PM 12/29/2008, Harshavardhana Ranganath wrote: >Hi Stas, > > mod_glusterfs is for checking for apache module build directly >with glusterfs build. But there is no lighttpd support at the moment >at the configure level. > >Regards >On 12/30/08, Stas Oskin ><<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > > Hi. > > > > Yes, this is clear to me, as I built lighttpd modules in the past. > > > > What I''m asking about, is what the "mod_glusterfs" option means > in configure > > script? > > > > Regards. > > > > 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > > >> Hi Stas, > >> > >> Seperately means not even through the configure script. You need to > >> copy > >> the lighttpd files from glusterfs directory and copy it to actual lighttpd > >> source directory > >> and patch its Makefile using the *.diff provided under lighttpd directory > >> from glusterfs > >> Only then you will be able to build lighttpd glusterfs module. > >> > >> Regards > >> > >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > >> > >>> Hi. > >>> > >>> If the lighttpd module needs to be compiled separately, what the the > >>> lighttpd config option does in the ./configure script? > >>> > >>> Regards. > >>> > >>> 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > >>> > >>> Hi Stas, > >>>> > >>>> Right now there are no such ways, you need to read the README inside > >>>> the glusterfs lighttpd directory and copy the source files to lighttpd > >>>> source directory and patch the Makefile using the diff provided and > >>>> compile. > >>>> Apart from that you can build RPMS for glusterfs and get it installed as > >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd > >>>> module > >>>> of glusterfs to work as it depends on "libglusterfsclient" > >>>> > >>>> Regards > >>>> > >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com>wrote: > >>>> > >>>>> Hi. > >>>>> > >>>>> I''m just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone knows > >>>>> of > >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? > >>>>> > >>>>> Regards. > >>>>> > >>>>> 2008/12/21 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > >>>>> > >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs > >>>>>> > >>>>>> should work for you. Let us know if you get any issue. > >>>>>> > >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence > <<mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > >>>>>> > wrote: > >>>>>> > >>>>>>> Harshavardhana Ranganath wrote: > >>>>>>> > >>>>>>>> * Replies inline * > >>>>>>>> > >>>>>>>> > >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < > >>>>>>>> <mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > <mailto:matt.lawrence at tamu.edu>> wrote: > >>>>>>>> > >>>>>>>> Matt Lawrence wrote: > >>>>>>>> > I am trying to build the latest release candidate and have run > >>>>>>>> into a > >>>>>>>> > bit of a problem. > >>>>>>>> > > >>>>>>>> > When I run ./configure, I get: > >>>>>>>> > > >>>>>>>> > GlusterFS configure summary > >>>>>>>> > ==========================> >>>>>>>> > FUSE client : no > >>>>>>>> > Infiniband verbs : no > >>>>>>>> > epoll IO multiplex : yes > >>>>>>>> > Berkeley-DB : no > >>>>>>>> > libglusterfsclient : yes > >>>>>>>> > mod_glusterfs : no () > >>>>>>>> > argp-standalone : no > >>>>>>>> > > >>>>>>>> I''m answering my own question. In my case, the solution was to > >>>>>>>> run > >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to > >>>>>>>> satisfy > >>>>>>>> dependencies and then run "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz > >>>>>>>> --without apxs_default". > >>>>>>>> > >>>>>>>> Minor problem when I went to install: > >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm > >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file or directory > >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet failed, exit > >>>>>>>> status 127 > >>>>>>>> > >>>>>>>> rpmbuild "--without apxs_default" needs to be used in conjunction > >>>>>>>> with "--define apxs_path /usr/local/apache" > >>>>>>>> if you have "apxs" installed in standard path then such an option is > >>>>>>>> not required. Also look inside glusterfs.spec file inside tarball > >>>>>>>> for more > >>>>>>>> information on glusterfs specific rpmbuild command line parameters > >>>>>>>> > >>>>>>> > >>>>>>> I looked in the spec file, but I''m a novice at them. How do I build > >>>>>>> a > >>>>>>> glusterfs rpm without any apache support? > >>>>>>> > >>>>>>> -- Matt > >>>>>>> > >>>>>> > >>>>>> > >>>>>> > >>>>>> -- > >>>>>> Harshavardhana > >>>>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >>>>>> "Samudaya TantraShilpi" > >>>>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >>>>>> > >>>>>> > >>>>>> _______________________________________________ > >>>>>> Gluster-users mailing list > >>>>>> <mailto:Gluster-users at gluster.org>Gluster-users at gluster.org > >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > >>>>>> > >>>>>> > >>>>> > >>>> > >>>> > >>>> -- > >>>> Harshavardhana > >>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >>>> "Samudaya TantraShilpi" > >>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >>>> > >>>> > >> > >> > >> -- > >> Harshavardhana > >> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >> "Samudaya TantraShilpi" > >> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >> > >> > > > > >-- >Harshavardhana >[y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] >"Samudaya TantraShilpi" >Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > >_______________________________________________ >Gluster-users mailing list ><mailto:Gluster-users at gluster.org>Gluster-users at gluster.org >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > > >-- >Harshavardhana >[y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] >"Samudaya TantraShilpi" >Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com
Hi Keith, Please find the comments inlined. On Tue, Dec 30, 2008 at 11:38 AM, Keith Freedman <freedman at freeformit.com>wrote:> is there documentation for the apache mod? > or a sample of how to configure it in httpd.conf?Documentation can be found in mod_glusterfs/apache/1.3/src/README.txt. We will be updating the documentation for 2.2 shortly, though there is not much difference in installation procedure b/w 1.3 and 2.2. 'make install' does not install the mod_glusterfs.so into apache modules directory. Instead it prints the apxs command along with its arguments on the screen. All you need to do is to copy the command and execute it.> > also, make install doesn't install it to the apache directory, which > I suppose is fine, but I had to search for the thing which, for a > lazy person such as myself, is undesirable :) > > At 10:59 PM 12/29/2008, Harshavardhana Ranganath wrote: > >Hi Stas, > > > > mod_glusterfs is for checking for apache module build directly > >with glusterfs build. But there is no lighttpd support at the moment > >at the configure level. > > > >Regards > >On 12/30/08, Stas Oskin <stas.oskin at gmail.com> wrote: > > > Hi. > > > > > > Yes, this is clear to me, as I built lighttpd modules in the past. > > > > > > What I'm asking about, is what the "mod_glusterfs" option means > > in configure > > > script? > > > > > > Regards. > > > > > > 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> > > > > > >> Hi Stas, > > >> > > >> Seperately means not even through the configure script. You need to > > >> copy > > >> the lighttpd files from glusterfs directory and copy it to actual > lighttpd > > >> source directory > > >> and patch its Makefile using the *.diff provided under lighttpd > directory > > >> from glusterfs > > >> Only then you will be able to build lighttpd glusterfs module. > > >> > > >> Regards > > >> > > >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin <stas.oskin at gmail.com> > wrote: > > >> > > >>> Hi. > > >>> > > >>> If the lighttpd module needs to be compiled separately, what the the > > >>> lighttpd config option does in the ./configure script? > > >>> > > >>> Regards. > > >>> > > >>> 2008/12/29 Harshavardhana Ranganath <harsha at zresearch.com> > > >>> > > >>> Hi Stas, > > >>>> > > >>>> Right now there are no such ways, you need to read the README > inside > > >>>> the glusterfs lighttpd directory and copy the source files to > lighttpd > > >>>> source directory and patch the Makefile using the diff provided and > > >>>> compile. > > >>>> Apart from that you can build RPMS for glusterfs and get it > installed as > > >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd > > >>>> module > > >>>> of glusterfs to work as it depends on "libglusterfsclient" > > >>>> > > >>>> Regards > > >>>> > > >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin <stas.oskin at gmail.com > >wrote: > > >>>> > > >>>>> Hi. > > >>>>> > > >>>>> I'm just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone > knows > > >>>>> of > > >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? > > >>>>> > > >>>>> Regards. > > >>>>> > > >>>>> 2008/12/21 Harshavardhana Ranganath <harsha at zresearch.com> > > >>>>> > > >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs > > >>>>>> > > >>>>>> should work for you. Let us know if you get any issue. > > >>>>>> > > >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence < > matt.lawrence at tamu.edu > > >>>>>> > wrote: > > >>>>>> > > >>>>>>> Harshavardhana Ranganath wrote: > > >>>>>>> > > >>>>>>>> * Replies inline * > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < > > >>>>>>>> matt.lawrence at tamu.edu <mailto:matt.lawrence at tamu.edu>> wrote: > > >>>>>>>> > > >>>>>>>> Matt Lawrence wrote: > > >>>>>>>> > I am trying to build the latest release candidate and have > run > > >>>>>>>> into a > > >>>>>>>> > bit of a problem. > > >>>>>>>> > > > >>>>>>>> > When I run ./configure, I get: > > >>>>>>>> > > > >>>>>>>> > GlusterFS configure summary > > >>>>>>>> > ==========================> > >>>>>>>> > FUSE client : no > > >>>>>>>> > Infiniband verbs : no > > >>>>>>>> > epoll IO multiplex : yes > > >>>>>>>> > Berkeley-DB : no > > >>>>>>>> > libglusterfsclient : yes > > >>>>>>>> > mod_glusterfs : no () > > >>>>>>>> > argp-standalone : no > > >>>>>>>> > > > >>>>>>>> I'm answering my own question. In my case, the solution was > to > > >>>>>>>> run > > >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to > > >>>>>>>> satisfy > > >>>>>>>> dependencies and then run "rpmbuild -ta > glusterfs-1.4.0rc6.tar.gz > > >>>>>>>> --without apxs_default". > > >>>>>>>> > > >>>>>>>> Minor problem when I went to install: > > >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm > > >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file or > directory > > >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet failed, > exit > > >>>>>>>> status 127 > > >>>>>>>> > > >>>>>>>> rpmbuild "--without apxs_default" needs to be used in > conjunction > > >>>>>>>> with "--define apxs_path /usr/local/apache" > > >>>>>>>> if you have "apxs" installed in standard path then such an > option is > > >>>>>>>> not required. Also look inside glusterfs.spec file inside > tarball > > >>>>>>>> for more > > >>>>>>>> information on glusterfs specific rpmbuild command line > parameters > > >>>>>>>> > > >>>>>>> > > >>>>>>> I looked in the spec file, but I'm a novice at them. How do I > build > > >>>>>>> a > > >>>>>>> glusterfs rpm without any apache support? > > >>>>>>> > > >>>>>>> -- Matt > > >>>>>>> > > >>>>>> > > >>>>>> > > >>>>>> > > >>>>>> -- > > >>>>>> Harshavardhana > > >>>>>> [y4m4 on #gluster at irc.freenode.net] > > >>>>>> "Samudaya TantraShilpi" > > >>>>>> Z Research Inc - http://www.zresearch.com > > >>>>>> > > >>>>>> > > >>>>>> _______________________________________________ > > >>>>>> Gluster-users mailing list > > >>>>>> Gluster-users at gluster.org > > >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > >>>>>> > > >>>>>> > > >>>>> > > >>>> > > >>>> > > >>>> -- > > >>>> Harshavardhana > > >>>> [y4m4 on #gluster at irc.freenode.net] > > >>>> "Samudaya TantraShilpi" > > >>>> Z Research Inc - http://www.zresearch.com > > >>>> > > >>>> > > >> > > >> > > >> -- > > >> Harshavardhana > > >> [y4m4 on #gluster at irc.freenode.net] > > >> "Samudaya TantraShilpi" > > >> Z Research Inc - http://www.zresearch.com > > >> > > >> > > > > > > > > >-- > >Harshavardhana > >[y4m4 on #gluster at irc.freenode.net] > >"Samudaya TantraShilpi" > >Z Research Inc - http://www.zresearch.com > > > >_______________________________________________ > >Gluster-users mailing list > >Gluster-users at gluster.org > >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > _______________________________________________ > Gluster-users mailing list > Gluster-users at gluster.org > http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users >-- Raghavendra G -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://supercolony.gluster.org/pipermail/gluster-users/attachments/20081231/9d7e86bd/attachment.html>
I got it all figured out. I think it''ll work well for a web repository, but it wouldn''t work for a shared hosting environment. I was hoping for something which would recognize the documentroot as being a gluster mountpoint and therefor serve files directly from gluster instead of through the filesystem interface. I''m not sure if this is even possible, but if it is, then that would be very ideal and, presumably, would work for shared hosting, but, it is easily installed and configured if one does take 3 seconds to read, which I clearly didn''t :P At 09:23 PM 12/30/2008, Raghavendra G wrote:>Hi Keith, >Please find the comments inlined. > >On Tue, Dec 30, 2008 at 11:38 AM, Keith Freedman ><<mailto:freedman at freeformit.com>freedman at freeformit.com> wrote: >is there documentation for the apache mod? >or a sample of how to configure it in httpd.conf? > > >Documentation can be found in >mod_glusterfs/apache/1.3/src/README.txt. We will be updating the >documentation for 2.2 shortly, though there is not much difference >in installation procedure b/w 1.3 and 2.2. > >''make install'' does not install the mod_glusterfs.so into apache >modules directory. Instead it prints the apxs command along with its >arguments on the screen. All you need to do is to copy the command >and execute it. > > > >also, make install doesn''t install it to the apache directory, which >I suppose is fine, but I had to search for the thing which, for a >lazy person such as myself, is undesirable :) > >At 10:59 PM 12/29/2008, Harshavardhana Ranganath wrote: > >Hi Stas, > > > > mod_glusterfs is for checking for apache module build directly > >with glusterfs build. But there is no lighttpd support at the moment > >at the configure level. > > > >Regards > >On 12/30/08, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > > > Hi. > > > > > > Yes, this is clear to me, as I built lighttpd modules in the past. > > > > > > What I''m asking about, is what the "mod_glusterfs" option means > > in configure > > > script? > > > > > > Regards. > > > > > > 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > > > > >> Hi Stas, > > >> > > >> Seperately means not even through the configure script. You need to > > >> copy > > >> the lighttpd files from glusterfs directory and copy it to > actual lighttpd > > >> source directory > > >> and patch its Makefile using the *.diff provided under > lighttpd directory > > >> from glusterfs > > >> Only then you will be able to build lighttpd glusterfs module. > > >> > > >> Regards > > >> > > >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > > >> > > >>> Hi. > > >>> > > >>> If the lighttpd module needs to be compiled separately, what the the > > >>> lighttpd config option does in the ./configure script? > > >>> > > >>> Regards. > > >>> > > >>> 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > >>> > > >>> Hi Stas, > > >>>> > > >>>> Right now there are no such ways, you need to read the > README inside > > >>>> the glusterfs lighttpd directory and copy the source files to lighttpd > > >>>> source directory and patch the Makefile using the diff provided and > > >>>> compile. > > >>>> Apart from that you can build RPMS for glusterfs and get it > installed as > > >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd > > >>>> module > > >>>> of glusterfs to work as it depends on "libglusterfsclient" > > >>>> > > >>>> Regards > > >>>> > > >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com>wrote: > > >>>> > > >>>>> Hi. > > >>>>> > > >>>>> I''m just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone knows > > >>>>> of > > >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? > > >>>>> > > >>>>> Regards. > > >>>>> > > >>>>> 2008/12/21 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > >>>>> > > >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs > > >>>>>> > > >>>>>> should work for you. Let us know if you get any issue. > > >>>>>> > > >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence > <<mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > > >>>>>> > wrote: > > >>>>>> > > >>>>>>> Harshavardhana Ranganath wrote: > > >>>>>>> > > >>>>>>>> * Replies inline * > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < > > >>>>>>>> <mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > <mailto:matt.lawrence at tamu.edu>> wrote: > > >>>>>>>> > > >>>>>>>> Matt Lawrence wrote: > > >>>>>>>> > I am trying to build the latest release candidate > and have run > > >>>>>>>> into a > > >>>>>>>> > bit of a problem. > > >>>>>>>> > > > >>>>>>>> > When I run ./configure, I get: > > >>>>>>>> > > > >>>>>>>> > GlusterFS configure summary > > >>>>>>>> > ==========================> > >>>>>>>> > FUSE client : no > > >>>>>>>> > Infiniband verbs : no > > >>>>>>>> > epoll IO multiplex : yes > > >>>>>>>> > Berkeley-DB : no > > >>>>>>>> > libglusterfsclient : yes > > >>>>>>>> > mod_glusterfs : no () > > >>>>>>>> > argp-standalone : no > > >>>>>>>> > > > >>>>>>>> I''m answering my own question. In my case, the solution was to > > >>>>>>>> run > > >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to > > >>>>>>>> satisfy > > >>>>>>>> dependencies and then run "rpmbuild -ta > glusterfs-1.4.0rc6.tar.gz > > >>>>>>>> --without apxs_default". > > >>>>>>>> > > >>>>>>>> Minor problem when I went to install: > > >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm > > >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file > or directory > > >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet > failed, exit > > >>>>>>>> status 127 > > >>>>>>>> > > >>>>>>>> rpmbuild "--without apxs_default" needs to be used in conjunction > > >>>>>>>> with "--define apxs_path /usr/local/apache" > > >>>>>>>> if you have "apxs" installed in standard path then such > an option is > > >>>>>>>> not required. Also look inside glusterfs.spec file inside tarball > > >>>>>>>> for more > > >>>>>>>> information on glusterfs specific rpmbuild command line parameters > > >>>>>>>> > > >>>>>>> > > >>>>>>> I looked in the spec file, but I''m a novice at them. How > do I build > > >>>>>>> a > > >>>>>>> glusterfs rpm without any apache support? > > >>>>>>> > > >>>>>>> -- Matt > > >>>>>>> > > >>>>>> > > >>>>>> > > >>>>>> > > >>>>>> -- > > >>>>>> Harshavardhana > > >>>>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > > >>>>>> "Samudaya TantraShilpi" > > >>>>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > >>>>>> > > >>>>>> > > >>>>>> _______________________________________________ > > >>>>>> Gluster-users mailing list > > >>>>>> <mailto:Gluster-users at gluster.org>Gluster-users at gluster.org > > >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > >>>>>> > > >>>>>> > > >>>>> > > >>>> > > >>>> > > >>>> -- > > >>>> Harshavardhana > > >>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > > >>>> "Samudaya TantraShilpi" > > >>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > >>>> > > >>>> > > >> > > >> > > >> -- > > >> Harshavardhana > > >> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > > >> "Samudaya TantraShilpi" > > >> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > >> > > >> > > > > > > > > >-- > >Harshavardhana > >[y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >"Samudaya TantraShilpi" > >Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > > >_______________________________________________ > >Gluster-users mailing list > ><mailto:Gluster-users at gluster.org>Gluster-users at gluster.org > >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > >_______________________________________________ >Gluster-users mailing list ><mailto:Gluster-users at gluster.org>Gluster-users at gluster.org >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > >-- >Raghavendra G
I got it all figured out. I think it''ll work well for a web repository, but it wouldn''t work for a shared hosting environment. I was hoping for something which would recognize the documentroot as being a gluster mountpoint and therefor serve files directly from gluster instead of through the filesystem interface. I''m not sure if this is even possible, but if it is, then that would be very ideal and, presumably, would work for shared hosting, but, it is easily installed and configured if one does take 3 seconds to read, which I clearly didn''t :P At 09:23 PM 12/30/2008, Raghavendra G wrote:>Hi Keith, >Please find the comments inlined. > >On Tue, Dec 30, 2008 at 11:38 AM, Keith Freedman ><<mailto:freedman at freeformit.com>freedman at freeformit.com> wrote: >is there documentation for the apache mod? >or a sample of how to configure it in httpd.conf? > > >Documentation can be found in >mod_glusterfs/apache/1.3/src/README.txt. We will be updating the >documentation for 2.2 shortly, though there is not much difference >in installation procedure b/w 1.3 and 2.2. > >''make install'' does not install the mod_glusterfs.so into apache >modules directory. Instead it prints the apxs command along with its >arguments on the screen. All you need to do is to copy the command >and execute it. > > > >also, make install doesn''t install it to the apache directory, which >I suppose is fine, but I had to search for the thing which, for a >lazy person such as myself, is undesirable :) > >At 10:59 PM 12/29/2008, Harshavardhana Ranganath wrote: > >Hi Stas, > > > > mod_glusterfs is for checking for apache module build directly > >with glusterfs build. But there is no lighttpd support at the moment > >at the configure level. > > > >Regards > >On 12/30/08, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > > > Hi. > > > > > > Yes, this is clear to me, as I built lighttpd modules in the past. > > > > > > What I''m asking about, is what the "mod_glusterfs" option means > > in configure > > > script? > > > > > > Regards. > > > > > > 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > > > > >> Hi Stas, > > >> > > >> Seperately means not even through the configure script. You need to > > >> copy > > >> the lighttpd files from glusterfs directory and copy it to > actual lighttpd > > >> source directory > > >> and patch its Makefile using the *.diff provided under > lighttpd directory > > >> from glusterfs > > >> Only then you will be able to build lighttpd glusterfs module. > > >> > > >> Regards > > >> > > >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > > >> > > >>> Hi. > > >>> > > >>> If the lighttpd module needs to be compiled separately, what the the > > >>> lighttpd config option does in the ./configure script? > > >>> > > >>> Regards. > > >>> > > >>> 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > >>> > > >>> Hi Stas, > > >>>> > > >>>> Right now there are no such ways, you need to read the > README inside > > >>>> the glusterfs lighttpd directory and copy the source files to lighttpd > > >>>> source directory and patch the Makefile using the diff provided and > > >>>> compile. > > >>>> Apart from that you can build RPMS for glusterfs and get it > installed as > > >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd > > >>>> module > > >>>> of glusterfs to work as it depends on "libglusterfsclient" > > >>>> > > >>>> Regards > > >>>> > > >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com>wrote: > > >>>> > > >>>>> Hi. > > >>>>> > > >>>>> I''m just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone knows > > >>>>> of > > >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? > > >>>>> > > >>>>> Regards. > > >>>>> > > >>>>> 2008/12/21 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > >>>>> > > >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs > > >>>>>> > > >>>>>> should work for you. Let us know if you get any issue. > > >>>>>> > > >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence > <<mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > > >>>>>> > wrote: > > >>>>>> > > >>>>>>> Harshavardhana Ranganath wrote: > > >>>>>>> > > >>>>>>>> * Replies inline * > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < > > >>>>>>>> <mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > <mailto:matt.lawrence at tamu.edu>> wrote: > > >>>>>>>> > > >>>>>>>> Matt Lawrence wrote: > > >>>>>>>> > I am trying to build the latest release candidate > and have run > > >>>>>>>> into a > > >>>>>>>> > bit of a problem. > > >>>>>>>> > > > >>>>>>>> > When I run ./configure, I get: > > >>>>>>>> > > > >>>>>>>> > GlusterFS configure summary > > >>>>>>>> > ==========================> > >>>>>>>> > FUSE client : no > > >>>>>>>> > Infiniband verbs : no > > >>>>>>>> > epoll IO multiplex : yes > > >>>>>>>> > Berkeley-DB : no > > >>>>>>>> > libglusterfsclient : yes > > >>>>>>>> > mod_glusterfs : no () > > >>>>>>>> > argp-standalone : no > > >>>>>>>> > > > >>>>>>>> I''m answering my own question. In my case, the solution was to > > >>>>>>>> run > > >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to > > >>>>>>>> satisfy > > >>>>>>>> dependencies and then run "rpmbuild -ta > glusterfs-1.4.0rc6.tar.gz > > >>>>>>>> --without apxs_default". > > >>>>>>>> > > >>>>>>>> Minor problem when I went to install: > > >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm > > >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file > or directory > > >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet > failed, exit > > >>>>>>>> status 127 > > >>>>>>>> > > >>>>>>>> rpmbuild "--without apxs_default" needs to be used in conjunction > > >>>>>>>> with "--define apxs_path /usr/local/apache" > > >>>>>>>> if you have "apxs" installed in standard path then such > an option is > > >>>>>>>> not required. Also look inside glusterfs.spec file inside tarball > > >>>>>>>> for more > > >>>>>>>> information on glusterfs specific rpmbuild command line parameters > > >>>>>>>> > > >>>>>>> > > >>>>>>> I looked in the spec file, but I''m a novice at them. How > do I build > > >>>>>>> a > > >>>>>>> glusterfs rpm without any apache support? > > >>>>>>> > > >>>>>>> -- Matt > > >>>>>>> > > >>>>>> > > >>>>>> > > >>>>>> > > >>>>>> -- > > >>>>>> Harshavardhana > > >>>>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > > >>>>>> "Samudaya TantraShilpi" > > >>>>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > >>>>>> > > >>>>>> > > >>>>>> _______________________________________________ > > >>>>>> Gluster-users mailing list > > >>>>>> <mailto:Gluster-users at gluster.org>Gluster-users at gluster.org > > >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > >>>>>> > > >>>>>> > > >>>>> > > >>>> > > >>>> > > >>>> -- > > >>>> Harshavardhana > > >>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > > >>>> "Samudaya TantraShilpi" > > >>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > >>>> > > >>>> > > >> > > >> > > >> -- > > >> Harshavardhana > > >> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > > >> "Samudaya TantraShilpi" > > >> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > >> > > >> > > > > > > > > >-- > >Harshavardhana > >[y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >"Samudaya TantraShilpi" > >Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > > >_______________________________________________ > >Gluster-users mailing list > ><mailto:Gluster-users at gluster.org>Gluster-users at gluster.org > >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > >_______________________________________________ >Gluster-users mailing list ><mailto:Gluster-users at gluster.org>Gluster-users at gluster.org >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > >-- >Raghavendra G
I got it all figured out. I think it''ll work well for a web repository, but it wouldn''t work for a shared hosting environment. I was hoping for something which would recognize the documentroot as being a gluster mountpoint and therefor serve files directly from gluster instead of through the filesystem interface. I''m not sure if this is even possible, but if it is, then that would be very ideal and, presumably, would work for shared hosting, but, it is easily installed and configured if one does take 3 seconds to read, which I clearly didn''t :P At 09:23 PM 12/30/2008, Raghavendra G wrote:>Hi Keith, >Please find the comments inlined. > >On Tue, Dec 30, 2008 at 11:38 AM, Keith Freedman ><<mailto:freedman at freeformit.com>freedman at freeformit.com> wrote: >is there documentation for the apache mod? >or a sample of how to configure it in httpd.conf? > > >Documentation can be found in >mod_glusterfs/apache/1.3/src/README.txt. We will be updating the >documentation for 2.2 shortly, though there is not much difference >in installation procedure b/w 1.3 and 2.2. > >''make install'' does not install the mod_glusterfs.so into apache >modules directory. Instead it prints the apxs command along with its >arguments on the screen. All you need to do is to copy the command >and execute it. > > > >also, make install doesn''t install it to the apache directory, which >I suppose is fine, but I had to search for the thing which, for a >lazy person such as myself, is undesirable :) > >At 10:59 PM 12/29/2008, Harshavardhana Ranganath wrote: > >Hi Stas, > > > > mod_glusterfs is for checking for apache module build directly > >with glusterfs build. But there is no lighttpd support at the moment > >at the configure level. > > > >Regards > >On 12/30/08, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > > > Hi. > > > > > > Yes, this is clear to me, as I built lighttpd modules in the past. > > > > > > What I''m asking about, is what the "mod_glusterfs" option means > > in configure > > > script? > > > > > > Regards. > > > > > > 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > > > > >> Hi Stas, > > >> > > >> Seperately means not even through the configure script. You need to > > >> copy > > >> the lighttpd files from glusterfs directory and copy it to > actual lighttpd > > >> source directory > > >> and patch its Makefile using the *.diff provided under > lighttpd directory > > >> from glusterfs > > >> Only then you will be able to build lighttpd glusterfs module. > > >> > > >> Regards > > >> > > >> On Mon, Dec 29, 2008 at 3:54 PM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com> wrote: > > >> > > >>> Hi. > > >>> > > >>> If the lighttpd module needs to be compiled separately, what the the > > >>> lighttpd config option does in the ./configure script? > > >>> > > >>> Regards. > > >>> > > >>> 2008/12/29 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > >>> > > >>> Hi Stas, > > >>>> > > >>>> Right now there are no such ways, you need to read the > README inside > > >>>> the glusterfs lighttpd directory and copy the source files to lighttpd > > >>>> source directory and patch the Makefile using the diff provided and > > >>>> compile. > > >>>> Apart from that you can build RPMS for glusterfs and get it > installed as > > >>>> stated earlier . Also you need glusterfs rpms installed for lighttpd > > >>>> module > > >>>> of glusterfs to work as it depends on "libglusterfsclient" > > >>>> > > >>>> Regards > > >>>> > > >>>> On Sun, Dec 28, 2008 at 2:41 AM, Stas Oskin > <<mailto:stas.oskin at gmail.com>stas.oskin at gmail.com>wrote: > > >>>> > > >>>>> Hi. > > >>>>> > > >>>>> I''m just building my own copy of GlusterFS 1.4.0rc7 RPM. Anyone knows > > >>>>> of > > >>>>> a way to build the mod_glusterfs for Lighttpd via RPM? > > >>>>> > > >>>>> Regards. > > >>>>> > > >>>>> 2008/12/21 Harshavardhana Ranganath > <<mailto:harsha at zresearch.com>harsha at zresearch.com> > > >>>>> > > >>>>>> rpmbuild -ta glusterfs-1.4.0rc6.tar.gz --without modglfs > > >>>>>> > > >>>>>> should work for you. Let us know if you get any issue. > > >>>>>> > > >>>>>> On Sun, Dec 21, 2008 at 1:14 AM, Matt Lawrence > <<mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > > >>>>>> > wrote: > > >>>>>> > > >>>>>>> Harshavardhana Ranganath wrote: > > >>>>>>> > > >>>>>>>> * Replies inline * > > >>>>>>>> > > >>>>>>>> > > >>>>>>>> On Sun, Dec 21, 2008 at 1:05 AM, Matt Lawrence < > > >>>>>>>> <mailto:matt.lawrence at tamu.edu>matt.lawrence at tamu.edu > <mailto:matt.lawrence at tamu.edu>> wrote: > > >>>>>>>> > > >>>>>>>> Matt Lawrence wrote: > > >>>>>>>> > I am trying to build the latest release candidate > and have run > > >>>>>>>> into a > > >>>>>>>> > bit of a problem. > > >>>>>>>> > > > >>>>>>>> > When I run ./configure, I get: > > >>>>>>>> > > > >>>>>>>> > GlusterFS configure summary > > >>>>>>>> > ==========================> > >>>>>>>> > FUSE client : no > > >>>>>>>> > Infiniband verbs : no > > >>>>>>>> > epoll IO multiplex : yes > > >>>>>>>> > Berkeley-DB : no > > >>>>>>>> > libglusterfsclient : yes > > >>>>>>>> > mod_glusterfs : no () > > >>>>>>>> > argp-standalone : no > > >>>>>>>> > > > >>>>>>>> I''m answering my own question. In my case, the solution was to > > >>>>>>>> run > > >>>>>>>> "rpmbuild -ta glusterfs-1.4.0rc6.tar.gz", install packages to > > >>>>>>>> satisfy > > >>>>>>>> dependencies and then run "rpmbuild -ta > glusterfs-1.4.0rc6.tar.gz > > >>>>>>>> --without apxs_default". > > >>>>>>>> > > >>>>>>>> Minor problem when I went to install: > > >>>>>>>> -bash-3.2# rpm -U /usr/src/redhat/RPMS/x86_64/glusterfs-*rpm > > >>>>>>>> /var/tmp/rpm-tmp.71291: line 2: /apxs: No such file > or directory > > >>>>>>>> error: %post(glusterfs-1.4.0rc6-1.x86_64) scriptlet > failed, exit > > >>>>>>>> status 127 > > >>>>>>>> > > >>>>>>>> rpmbuild "--without apxs_default" needs to be used in conjunction > > >>>>>>>> with "--define apxs_path /usr/local/apache" > > >>>>>>>> if you have "apxs" installed in standard path then such > an option is > > >>>>>>>> not required. Also look inside glusterfs.spec file inside tarball > > >>>>>>>> for more > > >>>>>>>> information on glusterfs specific rpmbuild command line parameters > > >>>>>>>> > > >>>>>>> > > >>>>>>> I looked in the spec file, but I''m a novice at them. How > do I build > > >>>>>>> a > > >>>>>>> glusterfs rpm without any apache support? > > >>>>>>> > > >>>>>>> -- Matt > > >>>>>>> > > >>>>>> > > >>>>>> > > >>>>>> > > >>>>>> -- > > >>>>>> Harshavardhana > > >>>>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > > >>>>>> "Samudaya TantraShilpi" > > >>>>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > >>>>>> > > >>>>>> > > >>>>>> _______________________________________________ > > >>>>>> Gluster-users mailing list > > >>>>>> <mailto:Gluster-users at gluster.org>Gluster-users at gluster.org > > >>>>>> http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > >>>>>> > > >>>>>> > > >>>>> > > >>>> > > >>>> > > >>>> -- > > >>>> Harshavardhana > > >>>> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > > >>>> "Samudaya TantraShilpi" > > >>>> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > >>>> > > >>>> > > >> > > >> > > >> -- > > >> Harshavardhana > > >> [y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > > >> "Samudaya TantraShilpi" > > >> Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > >> > > >> > > > > > > > > >-- > >Harshavardhana > >[y4m4 on #<mailto:gluster at irc.freenode.net>gluster at irc.freenode.net] > >"Samudaya TantraShilpi" > >Z Research Inc - <http://www.zresearch.com>http://www.zresearch.com > > > >_______________________________________________ > >Gluster-users mailing list > ><mailto:Gluster-users at gluster.org>Gluster-users at gluster.org > >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > >_______________________________________________ >Gluster-users mailing list ><mailto:Gluster-users at gluster.org>Gluster-users at gluster.org >http://zresearch.com/cgi-bin/mailman/listinfo/gluster-users > > > > >-- >Raghavendra G