similar to: Problem with 16-in-1 card reader

Hi. On one of my fresh installed servers I am seeing the following output during boot: gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 30 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot: error 4 lba 31 gptzfsboot:

Hi, I have some problems with usb da and uscanner giving me I/O-errors. This is on a ASRock K7VT2 board. If there is anything else I could do (testing patches, providing further info), please let me know. 4.8-STABLE from 04.08.2003: - MBO USB-MultiCardReader 6-in-1 mount_msdos => Input/output error - Epson Perfection 1260 Scanner scanimage --test => Error during device I/O

I seem to have managed to end up with a pool that is confused abut its children disks. The pool is faulted with corrupt metadata: pool: d state: FAULTED status: The pool metadata is corrupted and the pool cannot be opened. action: Destroy and re-create the pool from a backup source. see: http://illumos.org/msg/ZFS-8000-72 scan: none requested config: NAME STATE

I have a new system which includes a Plextor PX-740a DVD+-R/RW CD-R/RW drive attached to an Asus A8V-MX motherboard. When I try to use burncd to burn a cd, it writes all of the data, says "fixating CD, please wait.." and then reports burncd: ioctl(CDRIOCFIXATE): Input/output error Oddly enough, the CD seems to be usable. I can successfully burn the same file if I use cdrecord. The

Hello all. I have a supermicro 16 bay box with a LSI 9211-8i card. We use it for temp data storage, and we wanted to try the l4z compression. After updating the source tree to r247839: and doing a make buildworld cycle all works fine. But at boot time we get some warnings. make_dev_physpath_alias: WARNING - Unable to alias gptid/281951f4-a996-11e1-83eb-00259061b51a to enc at

Hi. If I create a zpool with the following command: zpool create tank raidz2 da0 da1 da2 da3 da4 da5 da6 da7 and after a reboot the device names for some reason are changed so da2 and da5 are swapped, either by altering the LUN setting on the storage or by switching cables/swapping disks etc.? How will zfs handle that? Will it simply acknowledge that all devices are present and the pool is

Three different external hard drives (Seagate, Western Digital and noname USB 3.0 enclosure) refused to be recognized as the umass devices. Reverting /usr/src/sys/dev/bsd/controller to r248085, building and loading just xhci module makes drives appear again. Below are snippets from the log in both cases: Non working: Jul 4 14:35:17 twinhead kernel: xhci0: <XHCI (generic) USB 3.0

Hi I have a quad processor Compaq Proliant 5500. The output from dmesg seems strange (I have also sent a copy to freebsd-smp to ask about smp issues) and there are also some performance issues which I suspect are smp related. Could anyone who fels so inclined please take a look at the output and let me have any comments. Thanks _______________________________ Copyright (c) 1992-2002 The

A problem with 4.8 reported by myself and Aaron D. Gifford. Anyone in -stable who knows more? ******** I'm assembling a Compaq 1850R with attached storage system. For the built in scsi controller (sym), there are three drives internally on channel 1 + 5 drives externally on channel 2. During boot, I can see all disks being identified first by the machine itself and then in the early part

I've just had a 4.9p1 system partially deadlock for about 30 minutes and then spontaneously(?) recover. The "ps" results point at vinum. I've never seen this before and don't recall anything like this being mentioned here before. At the time, I had two find's running in a large NFS mounted filesystem and was doing a "cvs -d /usr/ncvs -R checkout -P ports" from

I put this to the smp list and to stable but have had no takers from wither. nThere are both smp and other system issues and I am just wondering if anyoe would be willing to take a look at this output from dmesg and let me have some advice Thanks david ----- Original Message ----- From: "vizion communication" <vizion@ixpres.com> To: <freebsd-smp@freebsd.org> Sent:

Have the following problems: MBO USB-MultiCardREader 6-in-1 does not read 128MB CF-Card. Oct 3 13:49:23 katrin /kernel: da0 at umass-sim0 bus 0 target 0 lun 0 Oct 3 13:49:23 katrin /kernel: da0: <ICSI IC1100 CF 2.5B> Removable Direct Access SCSI-0 device Oct 3 13:49:23 katrin /kernel: da0: 650KB/s transfers Oct 3 13:49:23 katrin /kernel: da0: Attempt to query device size failed:

Hi Steven, Read/Write errors are recorded when an active path of the geom_multipath device is pulled while running the i/o on dataset created for the pool. Running I/o on dataset using dd. *Freebsd version :* 9.0 *Patch imported from stable 9 : *r229303, r234916 *zpool status:* * * pool: poola state: ONLINE scan: none requested config:

I have an Asus A8V-MX motherboard with an AMD Athlong 64 X2 3800+ CPU and I'm trying to run powerd to keep it cooler/quieter/greener. I'm running -STABLE (6.1-RC) cvsup'ed a couple of days ago, with a kernel config that consists of the SMP sample plus an atapicam device. I'm loading the cpufreq.ko module in /boot/loader.conf. I've attached my dmesg output and sysctl -a

Hi Folks, I've facing an intermittent hang with a USB port which seems cam related: Event's that happen are: o USB modem (HUAWEI E220) plugged into PC ugen3.2: <HUA WEI> at usbus3 u3g0: <3G Modem> on usbus3 u3g0: Found 3 ports. umass0: <USB MASS STORAGE> on usbus3 umass0: SCSI over Bulk-Only; quirks = 0x0000 umass0:6:0:-1: Attached to scbus6 umass1: <USB

Machine is 4.8-STABLE smaug# camcontrol devlist <COMPAQ BD009122BA 3B07> at scbus0 target 0 lun 0 (pass0,da0) <COMPAQ BD009122C6 B016> at scbus0 target 1 lun 0 (pass1,da1) <COMPAQ BD009122BA 3B07> at scbus0 target 2 lun 0 (pass2,da2) <COMPAQ BD00962373 BCJE> at scbus0 target 3 lun 0 (pass3,da3) <IBM IC35L018UCPR15-0 S70H>

I recently put together a new machine w/ a SuperMicro H8SCM and an AMD Opteron 4228 HE... I've having an issue where the clock on the machine skips around... The wierd part is that it's very sudden when it happens... ntp sometimes brings it back, but it can't when the clock gets too far ahread (1000 seconds), ntp dies... In order to catch it happening, I ran a sleep 60 loop

Hi All, I am looking at ZFS and I get that they call it RAIDZ which is similar to RAID 5, but what about RAID 10? Isn''t a RAID 10 setup better for data protection? So if I have 8 x 1.5tb drives, wouldn''t I: - mirror drive 1 and 5 - mirror drive 2 and 6 - mirror drive 3 and 7 - mirror drive 4 and 8 Then stripe 1,2,3,4 Then stripe 5,6,7,8 How does one do this with ZFS?

I have a motherboard here that reports USB controllers thusly in dmesg (5.4-stable): usb0: OHCI version 1.0, legacy support usb0: <SiS 5571 USB controller> on ohci0 usb0: USB revision 1.0 uhub0: SiS OHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ohci1: <SiS 5571 USB controller> mem 0xf7002000-0xf7002fff irq 5 at device 3.1 on pci0 usb1:

Hello! FreeBSD tarkhil.titl.ru 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #5: Tue Mar 14 14:58:53 MSK 2006 root@tarkhil.titl.ru:/usr/obj/usr/src/sys/ARMADA i386 encountered problems with USB-to-IDE box and NEC CD-RW/DVD drive. Controller /dev/usb3: addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), NEC(0x0000), rev 1.00 port 1 powered port 2 addr 2: high speed, self powered,