That's where I first went for information. I've
successfully burned a CD-R using cdrecord, as opposed
to burncd, which I would normally use for ide burners.
I will check on the firmware.
Thanks,
Andrew Gould
--- "Thomas T. Veldhouse" <veldy@veldy.net>
wrote:> Try visiting
> http://fy.chalmers.se/~appro/linux/DVD+RW/ and make
> sure your
> hardware is working properly (i.e. firmware is
> up-to-date). Pehaps I will
> give it s try on my burner tonight and see how far
> it gets me.
>
> Tom Veldhouse
>
> ----- Original Message -----
> From: "Andrew Gould" <andrewgould@yahoo.com>
> To: "Andrew Sparrow" <spadger@spadger.best.vwh.net>;
> "Thomas T. Veldhouse"
> <veldy@veldy.net>
> Cc: <freebsd-stable@freebsd.org>
> Sent: Monday, June 16, 2003 5:11 PM
> Subject: Re: dvd+rw+r for FreeBSD -- Progress but no
> success
>
>
> > Update: Progress without success
> >
> > I've recompiled my system and kernel with
> atapicam.
> > Executing 'camcontrol devlist' results in a
> listing of
> > my dvd burner as a scsi device. Once I changed
> > '/dev/acd0c' to '/dev/cd0c' in /etc/fstab, I was
> able
> > to mount a cdrom in /dev/cd0c to /cdrom.
> >
> > I executed the following as root ('./testfile' is
> a
> > short text file.):
> >
> > >growisofs -Z /dev/cd0c -R -J ./testfile
> >
> > Resutls:
> > Executing 'mkisofs -R -J testfile | builtin_dd
> > of=/dev/pass0 obs=32k seek=0'
> > :-[ LBA=0h, SENSE KEY=5h/ASC=30h,ASCQ=10h ]
> > :-( write failed: Invalid argument
> >
> > Any ideas?
> >
> > Thanks,
> >
> > Andrew Gould
