search for: serverworks

Hi, I received a bug report against BerkeleyDB 4 that may not be BerkeleyDB related, but a problem with FreeBSD or specific hardware in general. Jie Song (CC'd) reported that writing files with BerkeleyDB (no threading or something) on his ServerWorks machine causes data corruption (detected by BerkeleyDB 4.0 library functions) when the file sizes grow beyond 350 MB. For details, see PR #55252. Jie Song has answered in private mail that the problem persists with both current 4.X and current 5.X FreeBSD versions. Does this ring a bell somewhere?...

Hello! Has anyone gotten 4.9R to recognize the "ServerWorks CSB6" ATA controller on a Dell 600SC? How about installing 5.2R on a 600SC? 5.2R recognizes the said controller, but it corrupts data. -- eof

Anyone using boards with this chipset? I've gotten some dual core single cpu boxes along with the physical dual cpu boxes I just received and they're using the Serverworks HT1000 (Broadcom 5785) chipset. My CentOS 4.2 DVD doesn't want to recognize the chipset so I can't see any of the SATA drives in the integrated SATA ports. Drives on 3Ware cards work as expected, but I was hoping to also make use of the integrated SATA ports. I'm downloading 4.3...

...t; Date: Wed, 29 Oct 2008 14:05:22 -0300 > From: Fernan Aguero <fernan@iib.unsam.edu.ar> > To: Kirk Strauser <kirk@strauser.com> > Cc: freebsd-stable@freebsd.org, d@delphij.net, > John Baldwin <jhb@freebsd.org>, re@freebsd.org > Subject: Re: [FreeBSD] Fix for ServerWorks HT1000 in upcoming 7.1? > >> On Tuesday 07 October 2008 17:10:49 Xin LI wrote: >> > Did anyone who can trigger the data corruption has tried John's patch >> > and let us know if it worked? >> > >> > Cheers, >> >> I can confirm that it wor...

Hi. I gave up with the IBM NetFinity, so I'm going to buy new hardware. I'm going to install: 1-)One X100P (1 FXO module) 2-)One TDM03B (3 FXO modules) I'll have the 4 FXO channels busy almost all the time, and I would like quality to be as good as possible without going to the high-level hardware. I would like to learn of some tested configurations (I've heard of problems

Hi all, is there a known issue with health monitoring on supermicro SuperServer 6010H? (Im primarily interested in temeperature monitoring) I have tried both mbmon and lmmon with the following results: stats# mbmon -d SMBus[ServerWorks(ServerSet Chipset)] found, but No HWM available on it!! No Hardware Monitor found!! InitMBInfo: Unknown error: 0 stats# lmmon IOCTL: Operation not supported by device This is on a fresh 4.8-STABLE, from cvs today. Running on: http://www.supermicro.com/PRODUCT/SUPERServer/SuperServer6010H.htm And t...

...debug this. The server stops right after the line about detecting the AGP video. I have tried booting with noprobe and some other kernel options but nothing seems to work. Please let me know what else I can try to get it to boot. Thanks, Ajay # lspci 00:00.0 Host bridge: Broadcom (formerly ServerWorks) CNB20HE Host Bridge (rev 23) 00:00.1 PCI bridge: Broadcom (formerly ServerWorks) CNB20LE Host Bridge (rev 01) 00:00.2 Host bridge: Broadcom (formerly ServerWorks) CNB20HE Host Bridge (rev 01) 00:00.3 Host bridge: Broadcom (formerly ServerWorks) CNB20HE Host Bridge (rev 01) 00:04.0 Ethernet con...

Hi! I''m doing load balancing for 5 dsl lines, each one with a dsl router attached to a linux machine ethernet plug. The problem is that I''m adding 15 more dsl lines, and I don''t have enough PCI slots in the linux machine to sum up 20 ethernet plugs (I already have 2 quad ethernet cards). So I''m considering connecting all dsl routers and the linux machine to a

...t;BCM5703 10/100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pci0: <base peripheral> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2000-0x200f,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xf5fc0000-0xf5fc0fff irq 11 at device 15.2 on pci0 usb0: OHCI version 1.0, leg...

Hi! I''ve 5 DSL routers and a linux router in a switch. The linux router is doing NAT for a LAN network, but it freezes when I set up load balancing with this command: ip route add default proto static\ nexthop via 192.168.1.10 dev eth1\ nexthop via 192.168.1.20 dev eth1\ nexthop via 192.168.1.30 dev eth1\ nexthop via 192.168.1.40 dev eth1\ nexthop

...7360 0 raid456 116496 1 xor 15144 1 raid456 loop 15944 0 ide_cd 36832 0 cdrom 33344 1 ide_cd ide_disk 15712 6 generic 5636 0 [permanent] floppy 51716 0 serverworks 9096 0 [permanent] rtc 13332 0 serial_core 20288 0 i2c_piix4 8908 0 i2c_core 20448 1 i2c_piix4 ide_core 112392 4 ide_cd,ide_disk,generic,serverworks ehci_hcd 29288 0 uhci_hcd 22188...

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

Has anyone had successfully installed more then two digium wildcards in the same machine? I'm going for four. thanks Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd. Office: +972-3-9230686 ext. 179 Fax: +972-3-9216642 Mobile: +972-54-8000200

...<PCI bus> on pcib0 pci0: <unknown card> (vendor=0x1028, dev=0x000c) at 4.0 irq 2 pci0: <unknown card> (vendor=0x1028, dev=0x0008) at 4.1 irq 7 pci0: <unknown card> (vendor=0x1028, dev=0x000d) at 4.2 irq 10 pci0: <ATI Mach64-GR graphics accelerator> at 14.0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0x8b0-0x8bf,0x8d8-0x8db,0x8d0-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 5 at device 15.2 on pci0 usb0: OHCI version...

...(APIC): apic id: 14, version: 0x000f0011, at 0xfec00000 io1 (APIC): apic id: 15, version: 0x000f0011, at 0xfec01000 Preloaded elf kernel "kernel" at 0xc04da000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <ServerWorks NB6635 3.0LE host to PCI bridge> on motherboard IOAPIC #1 intpin 11 -> irq 2 IOAPIC #1 intpin 0 -> irq 9 IOAPIC #1 intpin 2 -> irq 16 IOAPIC #0 intpin 9 -> irq 17 pci0: <PCI bus> on pcib0 pci0: <S3 Savage 4 graphics accelerator> at 1.0 pcn0: <AMD PCnet/PCI 10/100BaseTX...

...e 300 GB barracuda 7200 drives another 2 Seagate 500 GB 16mb cache baracuda ata 7200 drives lite on dual layer lightscribe 16x dvd+rw/rw x48 drive 4 port Sata Raid controller raid - 10 2 gigabit E broadcom 10/100/100 GBE lan controller Tyan Thunder K8WE (S2895) motherboard or Tyan motherboards with ServerWorks BCM5785 Chipset (or similar from Tyan only) All your comments will be appreciated. Thanks in advance. -- ------------------------------------------- Erick Perez Linux User 376588 http://counter.li.org/ (Get counted!!!) Panama, Republic of Panama

Hi, I have a server (Dell PowerEdge SC1435, ServerWorks HT1000) on which I'd like to try installing FreeBSD. I've already failed to make 7.0 work on this box and was wondering if you have information about the behavior of the upcoming 7.1 on this hardware. I've been following the "HT1000 chipset errata saga" thread, and the commit...

...%bh,%bh > Code; c0284b3b <skb_checksum_help+6b/a0> > 12: ff 01 incl (%ecx) > > <0>Kernel panic: Aiee, killing interrupt handler! > > 1 warning issued. Results may not be reliable. > > > uml:~# lspci > 00:00.0 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06) > 00:00.1 Host bridge: ServerWorks CNB20LE Host Bridge (rev 06) > 00:02.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) > 00:07.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) > 00:08.0 Ethernet controller: Intel C...

...MOV,PAT,PSE36,MMX,FXSR,SSE> real memory = 1342156800 (1310700K bytes) avail memory = 1300033536 (1269564K bytes) Preloaded elf kernel "kernel" at 0xc04be000. Pentium Pro MTRR support enabled md0: Malloc disk npx0: <math processor> on motherboard npx0: INT 16 interface pcib1: <ServerWorks host to PCI bridge> on motherboard pci1: <PCI bus> on pcib1 ciss0: <Compaq Smart Array 5i> port 0x3000-0x30ff mem 0xf7ef0000-0xf7ef3fff,0xf7fc0000-0xf7ffffff irq 11 at device 4.0 on pci1 ciss0: using 256 of 1024 available commands ciss0: 1 logical drive configured ciss0: firmware...

Hello, I just gain experiences in using XEN and hope you can help me. My hostsystem is Centos5 that I installed on a Software-Raid (Level 1). Afterwards I downloaded the debian-tarball from the jailtime.org website, extracted/mounted the image and copied the "*/lib/modules/*<kernelversion>"-folder from my host to the guest. My XEN-Configfile looks like this: kernel =