search for: ultra160

...g that will help me: mt -f /dev/st0 status /dev/st0: No such device or address Any suggestion? I am using CentOS 3 [RHEL ES3 without the licenses] The tape drive is recognized at boot [from dmesg] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 29160 Ultra160 SCSI adapter> aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs blk: queue d3e53014, I/O limit 4095Mb (mask 0xffffffff) (scsi0:A:11): 80.000MB/s transfers (40.000MHz, offset 32, 16bit) Vendor: EXABYTE Model: VXA-2 Rev: 100E Type: Sequential-Access...

...00(B) Ethernet> port 0xc800-0xc83f mem 0xfe800000-0xfe8fffff,0xfeafb000-0xfeafbfff irq 7 at device 4.0 on pci0 fxp0: Ethernet address 00:30:48:10:6b:9e inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd000-0xd0ff mem 0xfeafc000-0xfeafcfff irq 5 at device 5.0 on pci0 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 10 at device 5.1 on pci0 aic7899: Ultra160 Wide Cha...

I have an IDE based PC running Linux/CentOS4 to which I wish to attach a scsi dlt. The host controller is an Adaptec AHA3940 something that lspci reports as: SCSI storage controller: Initio Corporation 360P (rev 02). I would like to have the system load the driver for this adapter at boot but I have two problems: 1. I am not sure which driver to use; and 2. I do not know how to force

...x923 on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_cpu1: <CPU> on acpi0 acpi_cpu2: <CPU> on acpi0 acpi_cpu3: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 pcib0: <ACPI Host-PCI bridge> on acpi0 pci0: <ACPI PCI bus> on pcib0 ahc0: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port 0x2400-0x24ff mem 0xf7df0000-0xf7df0fff irq 3 at device 2.0 on pci0 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec (Compaq OEM) 3960D Ultra160 SCSI adapter> port 0x2800-0x28ff mem 0xf7de0000-0xf7de0fff irq 3 at device 2.1 on pci0 aic7899: Ultra16...

Hello! Has anyone gotten 4.9R to recognize the "ServerWorks CSB6" ATA controller on a Dell 600SC? How about installing 5.2R on a 600SC? 5.2R recognizes the said controller, but it corrupts data. -- eof

...try to be the most complete I can, so this post may be a little long. Customer environment: Intel(R) Pentium(R) III CPU family 1133MHz (Dell) with a Red hat 7.3 OS (Samba 2.2.3a), with 256Mo of RAM, scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.5 <Adaptec aic7899 Ultra160 SCSI adapter> aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs less than 10 Windows 2000/ME/98 connected The first problem was the crash of Excel when someone try to open a XLS file located on the PDC. According to the log file, it's a oplock problem (I saw posts about it an...

Hello, I am having issues making my box boot with Xen. I am working with linux-2.6.16.28-xen on a gentoo box. The server is Dell PowerEdge 1850 with Perc 4e/Si, FW 521X. When dom0 reaches the point of scanning the SCSI controllers, it hangs in a loop aic7xxx_dev_reset_returns 0x2002. My regular (non-xen) kernels come up fine with detecting my adaptec scsi controller. Had anyone had the same

I ran some iperf tests today and it looks like the etherbridge is the limiting factor on throughput. In the beforetime, I saw great throughput to the VMs; over 800 Mbps. With the bridge, the numbers are in the 400s somewhere. Is this the speed I can expect from the bridge? Is there some tuning I should try, or another way to get more bandwidth into the VMs? This is with xen-2.0, 2.4.27-xen0

...d Timecounter "PIIX" frequency 3579545 Hz chip1: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 pcm0: <AudioPCI ES1373-8> port 0xd400-0xd43f irq 2 at device 9.0 on pci0 pcm0: <Cirrus Logic CS4297A ac97 codec> ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xe4102000-0xe4102fff irq 16 at device 10.0 on pci0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xdc00-0xdc3f mem 0xe4000000-0xe40fffff,0xe4100000-0xe4100fff irq 17 at device 11....

...ϵÁÐ ST340016A 40.8GB/UDMA100/2MB/7200rpm/IDE/3.5"m 290 ¿áÓã¢ôϵÁÐ ST360021A 60GB/UDMA 100/2MB/7200rpm/IDE/3.5" 310 ¿áÓã¢ôϵÁÐ ST380021A 80GB/UDMA 100/2MB/7200rpm/IDE/3.5" 400 ¿áÓãϵÁÐ ST318416N/W 18.4GB/Ultra3 SCSI/50P/68P/40M/1MB/7200rpm 600 ¿áÓãϵÁÐ ST318436LW/LC 18.4GB/Ultra160 SCSI/68P/80P/160M/2M/7200rpm 608 ¿áÓãϵÁÐ ST136475LW/LC 36.4GB/Ultra2 SCSI/68P/80P/80M/1024K/7200rpm 1090 ¿áÓãϵÁÐ ST318404LW/LC 18.4GB/Ultra160 SCSI/68P/80P/160M/4MB/10000rpm 750 ¿áÓãϵÁÐ ST336403LW/LC 36.4GB/Ultra160 SCSI/68P/80P/160M/4MB/10000rpm 1280 ¿áÓãϵÁÐ ST173403LW/LC 73.4GB/Ultra1...

Conclusion: DO NOT USE SOFTWARE RAID-1 WITH EXT3 I've started with this conclusion cause i am positive that raid-1 and ext3 are causing data corruption. I've upgraded from 7.1 to 7.2 and from the first date i run into data corruption problems @ least once per day (i was monitoring once per day only) after 7 days we bought a brand new server cause the previous was very old and i thought

...tervals with a large amount of simultaneous reading and writing. This weekend we increased journal size from 32MB to 256MB on a group of machines. There was one with the following configuration: 2 x P3/667 256MB ServeRAID 4L (16MB cache, writethrough) 5 x 18GB 10k Ultra160 (RAID5, 8KB stripe) Red Hat 7.2 w/ kernel 2.4.20-18.7 The rest are: 2 x Xeon/2.4 1024MB ServeRAID 6i (128MB cache, writethrough) 5 x 36GB 15k Ultra320 (RAID5EE, 8KB stripe) Red Hat 7.2 w/ kernel 2.4.20-24.7 (addl path: ips 6.10 driver) This actuall...

I need to install an HP Surestore dlt on a Centos 4 machine and I am at a loss as to how to proceed. Can someone either provide or point me to an online reference on how to proceed to add and configure a SCSI adapter and tape drive. I have read, but not really understood, the man page entry for st. Does kudzu handle this? Regards, Jim I am a digest subscriber so the favour of an

...sed computer music. So perhaps I'm an idiot or just not very music-software literate, but I so far haven't been impressed with Winamp, or the FLAC plug-in. Just for one example, I've got a dual-Althlon MP 2000 system running XP Pro, with 1 gig RAM, 15,000 RPM 3.9 msec access time SCSI Ultra160 hard drives, and a 52X CD ROM drive that does 52X audio ripping. And yet, when I play CD's with Winamp 2.91, I get pauses and glitches, but not when I use Media Player. Something seems terribly wrong to me. I have heard that Winamp 3 isn't very popular among Winamp loyalists, and many Win...

...unassigned hot spare. The UltraTrak's SCSI interface is an Ultra2-LVD (80MB/sec) interface, connected via its external 68-pin MicroD cable, to a custom Granite Digital internal-to-external "Gold TPO" ribbon cable - which leads to the "B" channel of the onboard AIC7899W Ultra160 SCSI interface. The RAID unit is the only SCSI device attached to this channel at this time, and is terminated with a Granite Digital SCSI-Vue active diagnostic terminator. I have no indication or suspicion whatsoever of any SCSI bus problems. (I have also run same UltraTrak unit with same d...

...100+ Ethernet> port 0xb000-0xb03f mem 0xef800000-0xef81ffff,0xf0000000-0xf0000fff irq 10 at device 14.0 on pci0 fxp1: Ethernet address 00:02:b3:4c:32:12 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 19160B Ultra160 SCSI adapter> port 0xa800-0xa8ff mem 0xef000000-0xef000fff irq 12 at device 15.0 on pci0 aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs uhci0: <VIA 83C572 USB controller> port 0xa400-0xa41f irq 14 at device 16.0 on pci0 usb0: <VIA 83C572 USB controller> on uhci0 usb0: USB r...

...el 82801GB/R (ICH7) USB 2.0 controller> on ehci0 usb4: USB revision 2.0 uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub4: 8 ports with 8 removable, self powered pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0 pci4: <ACPI PCI bus> on pcib4 ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0x1000-0x10ff mem 0x90000000-0x90000fff irq 21 at device 0.0 on pci4 ahc0: [GIANT-LOCKED] aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs fxp0: <Intel 82801GB (ICH7) 10/100 Ethernet> port 0x1100-0x113f mem 0x90001000-0x90001fff irq 20 at device 8.0 on pci4 miibu...

...XL> port 0xe480-0xe4ff mem 0xfebfef00-0xfebf ef7f irq 11 at device 16.0 on pci0 xl1: Ethernet address: 00:01:02:be:6d:41 miibus1: <MII bus> on xl1 xlphy1: <3Com internal media interface> on miibus1 xlphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc0: <Adaptec 29160 Ultra160 SCSI adapter> port 0xe800-0xe8ff mem 0xfebff000-0x febfffff irq 10 at device 18.0 on pci0 aic7892: Wide Channel A, SCSI Id=7, 32/255 SCBs pcib1: <Intel 82443GX host to AGP bridge> on motherboard pci2: <PCI bus> on pcib1 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq...

I know this is a bit off topic but we are using Asterisk :) Since this list is full of tech gurus w/ all different sorts of backgrounds, I thought I would get the best opinions here. We have several different switches and other telecom equipment at our facilities which all have their own proprietary cdr platforms, which are rather limited. The company I work for is looking to develop their

...ce' runs unless there is a problem connecting to a share. I could probably take these out now as this was a warning for an NT bug. This does hold the file open for 5 seconds longer than required, but this was fine under NT (400Mhz/128Mb/IDE disks). The replacement is 700Mhz/512Mb/ vinum striped Ultra160 SCSIs, so I would expect it to cope. At least load wise. That NT bug: With the wrong domain name the user would be validated (username/password ok) but fail to connect to shares as he/she had not joined the domain. Samba doesn't seem to have this feature :) The kids of course would fiddle with...