similar to: Health monitoring

Hello lists, I,ve compaq ML350 with 2 Xeon 2.4 GHZ and FreeBSD 5.0 RELEASE installed and working very fine about 4 mounts. The machine running GENERIC kernel samba and firebird database server with no problems until at begining of this week, in morning machine freezes with no responce iven in conconsole, no responce from network (pinging) no responce on console (key pressing) the only way to get

Hi, Is there a way to make use of hardware monitoring on Intel 945GCLF (with Atom 230 cpu)? It is relatively new child of Intel, but maybe someone figured it out yet. pciconf -lv shows this: ichsmb0@pci0:0:31:3: class=0x0c0500 card=0x464c8086 chip=0x27da8086 rev=0x01 hdr=0x00 vendor = 'Intel Corporation' device = '82801G (ICH7 Family) SMBus

Hello everyone I have a quite weird problem, and I've try a lot of possibility without any success. It's about file transfert beetween a Windows 2000/98/ME and a Samba PDC. I've made some tests with a Win 2K PDC too. Oh yes, English isn't my native language, so please excuse me in advance for my *bad* english. I'll try to be the most complete I can, so this post may be a

Hello! Has anyone gotten 4.9R to recognize the "ServerWorks CSB6" ATA controller on a Dell 600SC? How about installing 5.2R on a 600SC? 5.2R recognizes the said controller, but it corrupts data. -- eof

Hi, I am running a Xeon with hyperthreading support. Until last week's HTT modifications, according to ps(1) and top(1) both logicals CPUs were in use. (Processes in CPU0 and CPU1 state; "C" column showing "0" or "1".) This has changed with a recent -STABLE kernel which includes last week's changes to HTT (removing "options HTT"). I am only seeing

Hi, We did an upgrade of one of our machines from an Aug 25 CVS and ever since then one of the machines likes to reboot about once a day. The machine is the following: IBM x340 2x1GHZ Processors 1GB RAM 3x36GB Drives (RAID 5) Mylex ExtreRAID 352 In the panic it mentions httpd, but I don't *think* it's apache (1.3.27) that's causing the problem, or am I wrong? I also believe it is

Hi, Can someone please help me with this? I have just upgraded from 4.7 to 4.8-STABLE and this is what I am getting when I try a tape backup. Please CC as I am not in the list. It was working well before the upgrade (dump -0ua -f - / | gzip -c -9 | dd of=/dev/nsa0). Thank you, Lefteris Tsintjelis Jul 3 22:55:18 ene /kernel:

Hi, We have a pretty serious problem with our news server crashing during the expire cronjob. This happened with 4.7-RELEASE, so we upgraded to 4.8-RELEASE recently, hoping that the problem might be fixed, but it isn't. The machine is a Compaq DL360-G2. I've searched the PR database as well as the mailing list archives for the panic string, but didn't find anything. What makes the

With a recent stable FreeBSD freebie.xs4all.nl 4.9-PRERELEASE FreeBSD 4.9-PRERELEASE #11: Sun Aug 31 14:17:04 CEST 2003 root@freebie.xs4all.nl:/usr/obj/usr/src/sys/FREEBIE i386 and a recent mbmon build: xmbmon-203 I'm now getting interesting results: wkb@freebie ~: mbmon Temp.= 255.0, 240.0, 255.0; Rot.= 11250, 270000, 225000 Vcore = 1.52, 3.15; Volt. = 3.20, 5.08, 15.50,

Hi, After kernel panic I couldn't get gdb work properly. msi$ uname -sr FreeBSD 4.7-RELEASE msi$ gdb -k /usr/src/sys/compile/MSINW/kernel.debug vmcore.0 GNU gdb 4.18 (FreeBSD) Copyright 1998 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show

I ran some iperf tests today and it looks like the etherbridge is the limiting factor on throughput. In the beforetime, I saw great throughput to the VMs; over 800 Mbps. With the bridge, the numbers are in the 400s somewhere. Is this the speed I can expect from the bridge? Is there some tuning I should try, or another way to get more bandwidth into the VMs? This is with xen-2.0, 2.4.27-xen0

Hello everyone, I'm unable to read temperature Gigabyte H77-DH3H motherboard. Is that motherboard supported or am I doing it incorrectly? When trying to access hw.acpi.thermal everything appears to be ok, but it is not, the system always returns 27,8C and 29,8C which fooled me initially - the values never change. Here is output: [chinatsu]:/root# sysctl hw.acpi.thermal

Hi everyone, My email server is running CentOS 3 and I can't upgrade it to CentOS 4 using the CD's. At first I thought it was the old Megaraid card (that's no longer supported), so I replaced that with a new card. I've tried ISO's from CentOS 4, 4.1 and now 4.2 which I've tested and booted in other machines. Just not this one. I've never had a problem like this

One of our FreeBSD boxes has a SCSI controller and disk, which showed problems earlier this week. There was a lot of of chatter from the SCSI driver in /var/log/messages and to the console. However, the console is unattended and we only discovered the problem subsequently because /var/log/console.log didn't show any of the chatter. console.log is otherwise working, and very helpful (e.g. it

Hi, Hi, I have been googling, and can't find anything that will help me: mt -f /dev/st0 status /dev/st0: No such device or address Any suggestion? I am using CentOS 3 [RHEL ES3 without the licenses] The tape drive is recognized at boot [from dmesg] scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 <Adaptec 29160 Ultra160 SCSI adapter> aic7892:

Hi, I had 6 crash in 3 hours with exactly the same messages is my aac controler dead ? aac0: COMMAND 0xc4c9d900 TIMEOUT AFTER 512 SECONDS aac0: WARNING! Controller is no longer running! code= 0x100 Fatal trap 12: page fault while in kernel mode cpuid = 0; apic id = 01 fault virtual address = 0x5a fault code = supervisor read, page not present instruction pointer =

Hi, I received a bug report against BerkeleyDB 4 that may not be BerkeleyDB related, but a problem with FreeBSD or specific hardware in general. Jie Song (CC'd) reported that writing files with BerkeleyDB (no threading or something) on his ServerWorks machine causes data corruption (detected by BerkeleyDB 4.0 library functions) when the file sizes grow beyond 350 MB. For details, see PR

I have an IDE based PC running Linux/CentOS4 to which I wish to attach a scsi dlt. The host controller is an Adaptec AHA3940 something that lspci reports as: SCSI storage controller: Initio Corporation 360P (rev 02). I would like to have the system load the driver for this adapter at boot but I have two problems: 1. I am not sure which driver to use; and 2. I do not know how to force

Hello everyone, I've just recently joined the ext3-users list. I spent much of the weekend browsing over list archives and other tidbits I could find on the net, regarding using an external journal, and running in data=journal mode. From what I have seen looking around at what other folks are doing, data=journal with an external journal may be able to help our problem here. If I

We are migrating from Fermi Labs linux distro to the Centos 3.6 distro. So far all of the Dell's we have installed on have worked fine but we have two generic servers that are using Tyan Thunder K7X motherboards with built in Adaptec Ultra 160 SCSI using AIC7899 chipset. When we try to install on these systems the install cd seems to lockup loading the AIC7xxx driver. Adaptec says they do not