I have centos 64 6.5 I installed bridge-utils I installed tunctl I added BRIDGE=br0 to ifcfg-eth0 I created ifcfg-br0 with correct settings I did service network restart and I get an error about br0 not present. When I plug in the second network (USB to ethernet) It detects as eth1 What do I need to change to get this to work. Thanks, jerry
Am 19.02.2014 23:36, schrieb Jerry Geis:> I have centos 64 6.5 > > I installed bridge-utils > I installed tunctl > > I added BRIDGE=br0 to ifcfg-eth0 > I created ifcfg-br0 with correct settings > > I did service network restart > and I get an error about br0 not present. > > When I plug in the second network (USB to ethernet) > It detects as eth1 > > What do I need to change to get this to work. > > Thanks, > > jerryWhat is your complete network configuration? Please see: https://access.redhat.com/site/documentation/en-US/Red_Hat_Enterprise_Linux/6/html/Deployment_Guide/s2-networkscripts-interfaces_network-bridge.html Alexander
On Thu, Feb 20, 2014 at 4:06 AM, Jerry Geis <geisj at pagestation.com> wrote:> I have centos 64 6.5 > > I installed bridge-utils > I installed tunctl > > I added BRIDGE=br0 to ifcfg-eth0 > I created ifcfg-br0 with correct settings > > I did service network restart > and I get an error about br0 not present. > > When I plug in the second network (USB to ethernet) > It detects as eth1 > > What do I need to change to get this to work. >Please follow this <http://www.banym.de/linux/centos/setup-bridge-device-on- centos> link to configure bridge in CentOS.> > Thanks, > > jerry > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >-- Regards Ashishkumar S. Yadav