search for: a101de

Hi, I have a Dell Power Edge server & planning yo buy Sangoma A101D card. To configure with my Asterisk 1.2.18 & zaptel-1.2.17.1 & Free-PBX setup. So I wanted to know the steps & any issue which I may come accross if any. I have googled & have some docs handy wrt Trixbox-2.2. Just wanted to get some notes from user with custom install setup when used with

Hi Guys, Anyone might know why this error keeps showing up and inbound/outbound is not working on a Bell PRI with Sangoma A101D? -- Got SABME from network peer. Sending Unnumbered Acknowledgement No calls can be made inbound/outbound. Keeps repeating. No alarms ON and no changes been made to the system. Stopped all a sudden. Asterisk CLI doesn't show anything with full verbose for both

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI...

Hi, I have A101DE Sangoma Card( http://www.sangoma.com/products/hardware_products/digital_voice_and_data_networking/a101.html ) lspci shows as 03:04.0 Network controller: Sangoma Technologies Corp. A200/Remora FXO/FXS Analog AFT card [root at asterisk ~]# lspci -vvv -s 03:04.0 03:04.0 Network controller: Sangoma Te...

We will be connecting our Asterisk server to ISDN 30 and intend using the Sangoma A101 card. The install location is in London (UK). Sangoma card at Voipon http://www.voipon.co.uk/sangoma-a101-pri-isdn-card-p-132.html?gclid=CI32vJz22I0CFQXklAodIgjHaA I would be grateful to hear if this is the right choice of card. Usage reports would be helpful. Regards Rory -- Rory Campbell-Lange

Hi, I have Sangoma A101DE 1 Port E1/T1 With Hardware Echo Cancellation ( PCI Express ) Card installed on the box. *Its not detected.* Details are as below :- [root at asterisk ~]# lspci 00:00.0 Host bridge: ATI Technologies Inc RS480 Host Bridge (rev 01) 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge 00:04.0 PCI...

Hello List, We purchased a TE120P card from Digium and it works great. The only problem is that we are still experiencing echo on some calls. I've tried various echo cancellers (right now we are using OSLEC) and still no luck. My question has anyone gone from the TE120P to a Sangoma A101D-X Single Port T1/E1/J1 w/ echo cancellation? Have you noticed a difference? Also I called

Hello Everyone. We have: Asterisk 1.4.21.2 zaptel-1.4.11 libpri-1.4.5 Sangoma A101D Connected to a PRI Cicso 7960G phones (About 30 of them) We have a problem with dropped calls that has going on for a long time. We get up to 5 dropped calls on a bad day. They all seem to be incoming calls. I have a recording of what my users report a dropped call sounds like right before it drops

Dear, I have an Asterisk PBX with two E1 cards: Digium TE122 and Sangoma A101D. Sangoma card has SNMP support but Digium card has not, and also SNMP does't give me ral time information. Within CLI Asterisk I execute "dahdi show channels" but I don't get information about channels usage. What is the best way to have real time monitoring of E1 channels usage and status ???

Hi Guys, Running the following with a Sangoma A101D PRI card: *Asterisk 1.4.21.2* *LibPRI version: 1.4.10* No inbound or outbound calls can be made. In fact Asterisk CLI doesn't show any activity. Problem goes away on restart of the system or maybe asterisk. I see post about upgrading Libpri to 1.4.10.2 and then I see posts that even that didn't work. Anyone can weigh in this please?

Hello All, I have a setup of ABE on rPath linux,Sangoma A101D, and a T-1 line (Not PRI) which is all happily coexisting and all lights are green. The T-1 comes in from the world into a "Shark Box" which splits the T into 384K data and 6 channels voice. The data side is working great. The voice side, not so great. It was originally broken out to 6 pots line and Verizon came back

Hi Guys, Full PRI installed in Canada with Sangoma A101DE and Asterisk 1.4.21.2, LibPRI 1.4.10. Placing a call into PRI and then transfering that call out to another number. Problem is that the call rings out but the moment the other party pickups both legs of the call are disconnected give Cause code 16. ************************************************...

Hi everyone, I'm trying to get a Sangoma A101D-X card talking to a Sasktel PRI (Megalink) circuit and having some trouble getting it to handshake. Thanks for any help or suggestions to diagnose this problem. The problem is that Asterisk has trouble bringing up the link. I see the following lines every couple of minutes: == Primary D-Channel on span 1 up == Primary D-Channel on

Hi all, i have been using asterisk for a few years but i am about to do my first t1 setup. After terrible quality issues between two business locations, we have decided to purchase a point to point t1 from the local phone co. The internet is too crappy, too much lag, queing and jitter. Most calls were dropped. I was about to order two cisco routers with csu cards and remembered our wonderful

Hi Everyone, Using a PRI with Sangoma A101D and Asterisk 1.4.2.x. I notice that occasionally after a call is disconnected and both the phone devices and the the channel is down but the bridge stays open for hours. Channel Location State Application(Data) Local/9054445555 at fro (None) Up Bridged Call(Zap/4-1) 9054445555 is the inbound DID on the

...*To:* Asterisk Users Mailing List - Non-Commercial Discussion >>> *Subject:* [asterisk-users] PRI Gurus ONLY - Too complex of an issue >>> >>> >>> >>> Hi Guys, >>> >>> >>> >>> Full PRI installed in Canada with Sangoma A101DE and Asterisk 1.4.21.2, >>> LibPRI 1.4.10. >>> >>> >>> >>> Placing a call into PRI and then transfering that call out to another >>> number. Problem is that the call rings out but the moment the other party >>> pickups both legs of the c...