Hi all, currently on a lenovo R60, after upgrading the CentOS 5.1 I cant detect the USB device any more. The initial installation doesnt have any problems at all. Cannot find solution in forums and bugs either. I am not sure if its a bug or wrongly did an update. The lsusb did not show the device. Things I did: (1) updated to 2.6.18-53.1.21.el5 i686 then to 2.6.18-92.1.6.el5 i686 and here are some of the settings after update (2) Ran lsmod ehci_hcd 33101 0 ohci_hcd 23261 0 uhci_hcd 25421 0 (3) Ran cat /proc/interrupts CPU0 CPU1 0: 204299 0 IO-APIC-edge timer 1: 208 0 IO-APIC-edge i8042 2: 0 0 XT-PIC cascade 8: 1 0 IO-APIC-edge rtc 11: 2 0 IO-APIC-edge ehci_hcd:usb1, uhci_hcd:usb2, uhci_hcd:usb3, uhci_hcd:usb4, uhci_hcd:usb5, HDA Intel, i915 at pci:0000:00:02.0 12: 4782 3521 IO-APIC-edge i8042 14: 6429 11429 IO-APIC-edge libata 15: 27 1370 IO-APIC-edge ide1 209: 27 2661 PCI-MSI eth0 NMI: 0 0 LOC: 204143 204151 ERR: 0 MIS: 0 (4) When I plug in usb disk, the /var/log/messages shows Jul 9 12:35:01 localhost kernel: usb 5-2: new high speed USB device using ehci_hcd and address 2 Jul 9 12:35:02 localhost kernel: ehci_hcd 0000:00:1d.7: Unlink after no-IRQ? Controller is probably using the wrong IRQ. Jul 9 12:35:12 localhost kernel: usb 5-2: device not accepting address 2, error -110 (5) checked blacklist file, no usb devices like the ehci Before going into CentOS 5.2, I need to verify what is the problem and if it will occur again. Any help on this? --- Join OSCC MAMPU Mailing Lists http://lists.oscc.org.my/mailman/listinfo/oscc-discuss