I hope this helps.
I have an ancient AMD K6-2 running Fedora Core 1 I use just for backups.
(Thanks, Fedora Legacy!) It's behind a NAT firewall to minimize security
issues.
It has a pile of HDDs in it, totalling well over a terabyte. (and about to be
upgrade to near 2 TB!) It's offsite from any primary hosting, and it's
always
on. I don't bother pulling HDD out - it's already offsite!
I use Backup Buddy http://www.effortlessis.com/backupbuddy to perform the
backups. It's pretty reliable.
Anyway, if you want to "sync up" two drives periodically, I'd
suggest either
using software RAID 1, and re-adding the drive to a normally-broken array,
(look for the software RAID howto) or using rsync. (The latter doesn't
perform nearly as well as the former, but has fewer dependencies at the
filesytem level)
It all depends on what you're really after...
-Ben
On Wednesday 11 January 2006 13:40, Ugo Bellavance
wrote:> Hi,
>
> One of my CentOS 4 server is a repository for backups for other
> machines. In this server, there is a 3ware RAID card and 2 HDD for the
> OS + data of this server. I also have 2 drawers (each containing one
> 200GB hdd), connected to a promise TX2000 card. One disk will remain in
> the server and one will be taken outside. What would be the best
> strategy for syncing the hdd when I swap them?
>
> Note: I don't want to do hot swap. No problem putting this server
down
> once a week. It is a development server.
>
> Regards,
> --
> Ugo
>
> -> Please don't send a copy of your reply by e-mail. I read the
list.
> -> Please avoid top-posting, long signatures and HTML, and cut the
> irrelevant parts in your replies.
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
--
"The best way to predict the future is to invent it."
- XEROX PARC slogan, circa 1978