search for: aic79xx

Has anyone expirienced problems with the aic79xx controller and xen 2.0.3 (liinux-2.6.10)? I have got FC3 running and compiled xen-2.0.3 from the sources. The compile ssems to work fine but after rebooting the xen0 domain the server stops during boot at the aic79xx message - no harddisks are recognized. I''ve searched through the m...

...: 123 Type: CD-ROM ANSI SCSI revision: 02 Host: scsi4 Channel: 00 Id: 00 Lun: 00 Vendor: Dell Model: Virtual Floppy Rev: 123 Type: Direct-Access ANSI SCSI revision: 02 [root at hcnas scsi]# ll total 0 dr-xr-xr-x 2 root root 0 Aug 3 13:21 aic79xx -r--r--r-- 1 root root 0 Aug 3 13:21 device_info -r--r--r-- 1 root root 0 Aug 3 13:21 scsi dr-xr-xr-x 2 root root 0 Aug 3 13:21 sg dr-xr-xr-x 2 root root 0 Aug 3 13:21 usb-storage [root at hcnas scsi]# cd aic79xx/ [root at hcnas aic79xx]# ll total 0 -rw-r--r-- 1 root root 0 Aug 3 13:09 1 -rw-r...

...if I go back to building separate xenU and xen0 kernels without initrd the device works without any issues. Any idea what is going wrong here? Am I leaving something out of my initrd? Here is the output of my mkinitrd: Root device: /dev/sda1 (mounted on / as reiserfs) Module list: ata_piix aic79xx reiserfs Kernel image: /boot/vmlinuz-2.6-xen Initrd image: /boot/initrd-2.6-xen Shared libs: lib64/ld-2.3.3.so lib64/libblkid.so.1.0 lib64/libc.so.6 lib64/libselinux.so.1 lib64/libuuid.so.1.2 Modules: kernel/drivers/scsi/scsi_mod.ko kernel/drivers/scsi/sd_mod.ko kernel/drivers/scsi...

...his. But if I use the linux-2.6-xen0 kernel it works well. Does anyone know why this is happening and how I can make it go away? Thanks, Aravindh Puthiyaparambil Xen Development Team Unisys, Tredyffrin PA ACPI: PCI Interrupt 0000:03:0d.0[A] -> GSI 49 (level, low) -> IRQ 18 scsi2 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 <Adaptec (Dell OEM) 39320 Ultra320 SCSI adapter> aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs Vendor: SEAGATE Model: ST373207LW Rev: D702 Type: Direct-Access ANSI SCSI revision: 03 t...

...might be useful ... Here is the output of lspci for the scsi card that is in the machine ... ---snip--- 04:02.0 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID (rev 10) 04:02.1 RAID bus controller: Adaptec ASC-39320(B) U320 w/HostRAID (rev 10) ---snip--- The driver for this card is the aic79xx.o and I see that it is compiled into the Xen kernel. Does anyone have any idea what is happening and how I might get Xen installed? thanks -- pAntZ Before you criticize someone, walk a mile in their shoes. That way, when you do criticize them, you''re a mile away and you have their sh...

...d_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer soundcore 12512 1 snd snd_page_alloc 12808 2 snd_intel8x0,snd_pcm mptsas 23308 0 scsi_transport_sas 19584 1 mptsas mptspi 12552 0 mptfc 16136 0 mptscsih 38608 3 mptsas,mptspi,mptfc scsi_transport_fc 31488 1 mptfc mptbase 51552 4 mptsas,mptspi,mptfc,mptscsih aic79xx 283992 0 scsi_transport_spi 25728 1 aic79xx ide_generic 5120 0 [permanent] sd_mod 20224 0 scsi_mod 129160 9 mptsas,scsi_transport_sas,mptspi,mptfc,mptscsih,scsi_transport_fc,aic79xx,scsi_transport_spi,sd_mod nfs 217164 1 nfs_acl 7552 1 nfs lockd 62600 2 nfs sunrpc 144188 4 nfs,nfs_acl,lockd ohci13...

...res for about 15 Windows workstations. I purchased it with an Adaptec Hostraid a320 controller (using two 146mb Seatgate drives mirrored with Hostraid) but slowly realising that getting up tod ate kernel supported drivers for these cards is near impossible. When I installed SLE9 it used the default AIC79xx driver which I believe is only rated at 160 and not 320 and although the system appears to run it causes SCSI transmission errors when disk is being thrashed Anyway to my Samba question....I need to format this server again and start from scratch as I have decided to use the Linux mirror feature a...

An INTEL Server motherboard model SE7501BR2 with an onboard Adaptec AIC7901 controller (with HostRAID) is not being recognized by CENTOS 4. The AIC79xx driver loads correctly, however it does not "see" the fact that I used the HostRAID onboard software to create a RAID 1 set. I went to the INTEL site and only found a driver for RHEL 3.0 and I was unable to find a driver on the adaptec site. The CENTOS4 installer gives me the option to...

...g version 1.0 (http://llvm.org/svn/llvm-project/cfe/trunk 76176M) text data bss dec hex 7412287 160516 1049460 8622263 8390b7 19m4.11s real 16m56.35s user 1m44.23s system -rw-r--r-- 1 jsg wsrc 122K Jul 18 01:41 if_spppsubr.o -rw-r--r-- 1 jsg wsrc 127K Jul 18 01:36 aic79xx.o -rw-r--r-- 1 jsg wsrc 130K Jul 18 01:46 pci_subr.o -rw-r--r-- 1 jsg wsrc 161K Jul 18 01:38 bwi.o -rw-r--r-- 1 jsg wsrc 349K Jul 18 01:47 isp_pci.o -rwxr-xr-x 1 jsg wsrc 7.9M Jul 18 01:54 bsd ========================= gcc 3.3.5 text data bss dec hex 6358820 182268...

Hello, The pxeconfig part: label sapcl03-xen kernel mboot.c32 append sles10/xen.gz dom0_mem=258048 --- sles10/linux-xen netdevice=eth0 insmod=aic79xx console=ttyS0,57600 --- sles10/initrd-xen.sapcl03 The thing sort of boots: COM32 Multiboot loader v0.2. Copyright (C) 2005-2006 Tim Deegan. Kernel: sles10/xen.gz dom0_mem=258048 Loading sles10/xen.gz..... Module: sles10/linux-xen netdevice=eth0 insmod=aic79xx console=ttyS0,57600...

Hi, I have a raid 1 setup where /boot and the rest lies inside the md0 container. /dev/sda1 md0 has /boot /dev/sda2 md0 has swap /dev/sda3 md0 has / SCSI card is an ADAPTEC AIC79xx Grub as the bootloader Centos 4.1 as the OS version Two 70gb SCSI disks The server was working fine. Then a power outage. checked the board,disk,ram,etc. All fine. Now when I try to boot the server does not even reach GRUB (no splash, no menu). I read a post about maybe the MBR got damaged (no fi...

Everyone, about 4 years ago, I tried to install CentOS 6 on a Supermicro server with SCSI drives using a LSI raid system. I could never figure out or find a way to make the installation disc of Centos 6 identify the SCSI drives. The installation disc for Centos 5 identified the SCSI drives without a problem. I finally gave up on Centos 6 and installed Centos 5 and the system has worked very

We're having a problem with Linux and/or the SCSI controller failing to access an external RAID device. Components are: SuperMicro 6025B-TR+V CentOS 5.0 with yum update as of a week or two ago (kernel 2.6.18-8.1.8.el5) Promise Vtrak M310p Adaptec 29320 LPE -- aic79xx module Sometimes this fails on the initial device probing (before the kernel even begins to boot); sometimes the device is recognized ok and then we get a failure later on in the boot sequence (and then the device disappears). RedHat Linux is in the compatibility list for that Adaptec card, and t...

...sure which driver to use; and 2. I do not know how to force Linux to load a driver module. My research to date indicates that the driver module for this device likely is one of: /lib/modules/2.6.9-11.EL/kernel/drivers/scsi/aic7xxx/aic7xxx.ko /lib/modules/2.6.9-11.EL/kernel/drivers/scsi/aic7xxx/aic79xx.ko /lib/modules/2.6.9-11.EL/kernel/drivers/scsi/initio.ko My reading of man modprobe.conf and modprobe lead me to conclude that the following needs to be added to /etc/modprobe.conf install <name of one of the above drives> alias scsi_host_adapter <name used for install> Can somebod...

...28 uk kernel: SMP Jun 9 10:58:28 uk kernel: Modules linked in: nls_utf8 usb_storage vfat fat md5 ipv6 parport_pc lp parport tun sunrpc ipt_MASQUERADE ipt_TOS ipt_LOG iptable_filter iptable_mangle iptable_nat ip_conntrack ip_tables button battery ac ohci_hcd e1000 tg3 floppy st ext3 jbd dm_mod gdth aic79xx sata_sil libata sd_mod scsi_mod Jun 9 10:58:28 uk kernel: CPU: 0 Jun 9 10:58:28 uk kernel: EIP: 0060:[<c01450fd>] Not tainted VLI Jun 9 10:58:28 uk kernel: EFLAGS: 00010216 (2.6.9-22.0.1.EL.1omsmp) Jun 9 10:58:28 uk kernel: EIP is at vma_prio_tree_add+0x36/0x95 Jun 9 10:58:28...

...dax firewire_core crc_itu_t sl811_hcd xhci_pci xhci_hcd usb_storage aic94xx libsas lpfc qla2xxx megaraid_sas megaraid_mbox megaraid_mm aacraid sx8 hpsa cciss 3w_9xxx 3w_xxxx 3w_sas mptsas scsi_transport_sas mptfc scsi_transport_fc mptspi mptscsih mptbase imm parport sym53c8xx initio arcmsr aic7xxx aic79xx scsi_transport_spi sr_mod cdrom sg sd_mod pdc_adma sata_inic162x sata_mv ata_piix ahci libahci [ 1730.734208] sata_qstor sata_vsc sata_uli sata_sis sata_sx4 sata_nv sata_via sata_svw sata_sil24 sata_sil sata_promise pata_via pata_jmicron pata_marvell pata_sis pata_netcell pata_pdc202xx_old pata_at...

...el: *pde = 00000000 kernel: Oops: 0002 [#1] kernel: SMP kernel: Modules linked in: xfs i2c_i801 bccfg(U) dvm(U) sg st osst nfsd exportfs lockd md5 ipv6 autofs4 i2c_dev i2c_core sunrpc iptable_filter ip_tables dm_mod button battery ac sr_mod usb_storage uhci_hcd ehci_hcd e1000 floppy ext3 jbd bcraid aic79xx sd_mod scsi_mod kernel: CPU: 3 kernel: EIP: 0060:[<02140b7c>] Tainted: PF VLI kernel: EFLAGS: 00010087 (2.6.9-1.667smp) kernel: EIP is at free_block+0x62/0xd6 kernel: eax: 00000029 ebx: 41db3000 ecx: 03f1ccbb edx: 00000000 kernel: esi: 41f6f280 edi: 0000003c ebp: 0000001...

...er I tried to reboot it, I got this: Assertion failure in __journal_drop_transaction() at fs/jbd/checkpoint.c:613: "transaction->t_forget == NULL" ------------[ cut here ]------------ kernel BUG at fs/jbd/checkpoint.c:613! invalid operand: 0000 [#1] PREEMPT SMP Modules linked in: ipv6 aic79xx serverworks eepro100 sworks_agp agpgart floppy evdev pcspkr ohci_hcd usbcore e100 mii capability commoncap ide_cd ide_core cdrom rtc ext2 ext3 jbd mbcache sd_mod aic7xxx scsi_mod raid1 md unix font vesafb cfbcopyarea cfbimgblt cfbfillrect CPU: 0 EIP: 0060:[<f88a77a0>] Not tainted EFL...

...IC-edge parport0 8: 0 0 0 0 IO-APIC-edge rtc 9: 0 0 0 0 IO-APIC-level acpi 14: 137 3218764 3143397 430444 IO-APIC-edge ide0 90: 3403812 5504380 553784 1273225 IO-APIC-level aic79xx 98: 460440049 0 0 0 PCI-MSI eth0 169: 210489 9211230 26272710 31733980 IO-APIC-level uhci_hcd:usb2, uhci_hcd:usb3, aacraid 177: 0 0 0 0 IO-APIC-level uhci_hcd:usb4 185: 2 0 0...

Hey Jeremy, Please pull from devel/pat (based off your xen/dom0/core tree) which has one patch: Konrad Rzeszutek Wilk (1): xen/pat: make pte_flags(x) a pvops function. which is neccessary for the drivers/gpu/drm/radeon driver to work properly with AGP based cards (which look to be the only ones that try to set WC on pages). Also please pull from devel/kms.fixes-05 (based off your