CentOS virt - Jun 2014 - Centos 6.5 Xen Stock cannot run dom-u PCI: Fatal: - ipmi_si

I had a supermicro server SuperServer 1027R-WRF4+ and a old Dell PowerEdge 2950.

In both machines I setup centos 6.5, which is running
3.10.34-11.el6.centos.alt.x86_64.

I follow Xen4Cen wiki to setup Xen, I had other servers running Centos
5.x without issues.

Now, once I build my vm's dom-u centos 6.5/centos 5.9 both x64, I
receive different erros, let me show u the message I receive in my
console for centos 6.5 dum-u.

xl  console oerp-server
PCI: Fatal: No config space access function found
ipmi_si: Could not set up I/O space
ipmi_si: Could not set up I/O space
ipmi_si: Could not set up I/O space

Something related to ipmi in my server which is enable by default? can
be, now what happen is I try to boot xentos 5.9 x64 dom-u:

Brought up 1 CPUs
checking if image is initramfs... it is
Grant table initialized
NET: Registered protocol family 16
Brought up 1 CPUs
PCI: setting up Xen PCI frontend stub
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI: disabled
xen_mem: Initialising balloon driver.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: System does not support PCI
PCI: System does not support PCI
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4
NetLabel:  unlabeled traffic allowed by default
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1402907331.494:1): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 691B840A64868995
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
rtc: IRQ 8 is not free.
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
brd: module loaded
Xen virtual console successfully installed as xvc0
Event-channel device installed.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: No PS/2 controller found. Probing ports directly.
i8042.c: No controller found.
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
XENBUS: Device with no driver: device/vbd/51712
XENBUS: Device with no driver: device/vif/0
XENBUS: Device with no driver: device/console/0
Initalizing network drop monitor service
Write protecting the kernel read-only data: 506k
Red Hat nash version 5.1.19.6 starting
Mounting proc filesystem
Mounting sysfs filesystem
Creating /dev
Creating initial device nodes
Setting up hotplug.
Creating block device nodes.
Loading ehci-hcd.ko module
Loading ohci-hcd.ko module
Loading uhci-hcd.ko module
USB Universal Host Controller Interface driver v3.0
Loading jbd.ko module
Loading ext3.ko module
Loading xenblk.ko module
XENBUS: Waiting for devices to initialise:
295s...290s...285s...280s...275s...270s...265s...260s...255s...250s...245s...240s...235s...230s...225s...220s...215s...210s...205s...200s...195s...190s...185s...180s...175s...170s...165s...160s...155s...150s...145s...140s...135s...130s...125s...120s...115s...110s...105s...100s...95s...90s...85s...80s...75s...70s...65s...60s...55s...50s...45s...40s...35s...30s...25s...20s...15s...10s...5s...0s...
XENBUS: Timeout connecting to device: device/vbd/51712 (local state 3,
remote state 1)
Loading dm-mod.ko module
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel at
redhat.com
Loading dm-log.ko module
Loading dm-mirror.ko module
Loading dm-zero.ko module
Loading dm-snapshot.ko module
Loading dm-mem-cache.ko module
Loading dm-region_hash.ko module
Loading dm-message.ko module
Loading dm-raid45.ko module
device-mapper: dm-raid45: initialized v0.2594l
Scanning and configuring dmraid supported devices
Scanning logical volumes
  Reading all physical volumes.  This may take a while...
  No volume groups found
Activating logical volumes
  Volume group "VolGroup00" not found
Creating root device.
Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
setuproot: error mounting /proc: No such file or directory
setuproot: error mounting /sys: No such file or directory
Switching to new root and running init.
unmounting old /dev
unmounting old /proc
unmounting old /sys
switchroot: mount failed: No such file or directory
Kernel panic - not syncing: Attempted to kill init!

Looks is not finding the dom-u disk.

In both cases I'm using almost the same settings:

name = "centos5"
uuid = "5020979f-8dae-105d-df56-9fb28d377aa2"
bootloader = "/usr/bin/pygrub"
memory = 2048
on_poweroff = "destroy"
on_reboot = "restart"
on_crash = "restart"
disk = [ "tap:aio:/ext4/centos5/disk.img,xvda,w" ]
vif = [ "mac=X:X:X:X:X:X,bridge=xenbr0,script=vif-bridge" ]

The main line of centos stock without Xen continue using kernel 2.6.x,
but Xen is using the new line 3.x.

Anyone else with this issue?

Thanks for your time.

On Mon, Jun 16, 2014 at 08:42:49AM -0700, Periko Support
wrote:
> I had a supermicro server SuperServer 1027R-WRF4+ and a old Dell PowerEdge
2950.
> 
> In both machines I setup centos 6.5, which is running
> 3.10.34-11.el6.centos.alt.x86_64.
> 
> I follow Xen4Cen wiki to setup Xen, I had other servers running Centos
> 5.x without issues.
> 
> Now, once I build my vm's dom-u centos 6.5/centos 5.9 both x64, I
> receive different erros, let me show u the message I receive in my
> console for centos 6.5 dum-u.
> 
> xl  console oerp-server
> PCI: Fatal: No config space access function found
> ipmi_si: Could not set up I/O space
> ipmi_si: Could not set up I/O space
> ipmi_si: Could not set up I/O space
> 
> Something related to ipmi in my server which is enable by default? can
> be, now what happen is I try to boot xentos 5.9 x64 dom-u:
So if I understand you correct - in 5.9 you did not see this, but
in 6.5 you do?

And the error is that some driver that looks to be built in
is telling you that it can't set up I/O space? Well, that is OK - if
it can't it cannot.
> 
> Brought up 1 CPUs
> checking if image is initramfs... it is
> Grant table initialized
> NET: Registered protocol family 16
> Brought up 1 CPUs
> PCI: setting up Xen PCI frontend stub
> ACPI: Interpreter disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI: disabled
> xen_mem: Initialising balloon driver.
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: System does not support PCI
> PCI: System does not support PCI
> NetLabel: Initializing
> NetLabel:  domain hash size = 128
> NetLabel:  protocols = UNLABELED CIPSOv4
> NetLabel:  unlabeled traffic allowed by default
> NET: Registered protocol family 2
> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
> TCP: Hash tables configured (established 262144 bind 65536)
> TCP reno registered
> audit: initializing netlink socket (disabled)
> type=2000 audit(1402907331.494:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> Initializing Cryptographic API
> alg: No test for crc32c (crc32c-generic)
> ksign: Installing public key data
> Loading keyring
> - Added public key 691B840A64868995
> - User ID: CentOS (Kernel Module GPG key)
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> rtc: IRQ 8 is not free.
> Non-volatile memory driver v1.2
> Linux agpgart interface v0.101 (c) Dave Jones
> brd: module loaded
> Xen virtual console successfully installed as xvc0
> Event-channel device installed.
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> PNP: No PS/2 controller found. Probing ports directly.
> i8042.c: No controller found.
> mice: PS/2 mouse device common for all mice
> md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
> md: bitmap version 4.39
> TCP bic registered
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> XENBUS: Device with no driver: device/vbd/51712
> XENBUS: Device with no driver: device/vif/0
> XENBUS: Device with no driver: device/console/0
> Initalizing network drop monitor service
> Write protecting the kernel read-only data: 506k
> Red Hat nash version 5.1.19.6 starting
> Mounting proc filesystem
> Mounting sysfs filesystem
> Creating /dev
> Creating initial device nodes
> Setting up hotplug.
> Creating block device nodes.
> Loading ehci-hcd.ko module
> Loading ohci-hcd.ko module
> Loading uhci-hcd.ko module
> USB Universal Host Controller Interface driver v3.0
> Loading jbd.ko module
> Loading ext3.ko module
> Loading xenblk.ko module
> XENBUS: Waiting for devices to initialise:
>
295s...290s...285s...280s...275s...270s...265s...260s...255s...250s...245s...240s...235s...230s...225s...220s...215s...210s...205s...200s...195s...190s...185s...180s...175s...170s...165s...160s...155s...150s...145s...140s...135s...130s...125s...120s...115s...110s...105s...100s...95s...90s...85s...80s...75s...70s...65s...60s...55s...50s...45s...40s...35s...30s...25s...20s...15s...10s...5s...0s...
> XENBUS: Timeout connecting to device: device/vbd/51712 (local state 3,
> remote state 1)
> Loading dm-mod.ko module
> device-mapper: uevent: version 1.0.3
> device-mapper: ioctl: 4.11.6-ioctl (2011-02-18) initialised: dm-devel at
redhat.com
> Loading dm-log.ko module
> Loading dm-mirror.ko module
> Loading dm-zero.ko module
> Loading dm-snapshot.ko module
> Loading dm-mem-cache.ko module
> Loading dm-region_hash.ko module
> Loading dm-message.ko module
> Loading dm-raid45.ko module
> device-mapper: dm-raid45: initialized v0.2594l
> Scanning and configuring dmraid supported devices
> Scanning logical volumes
>   Reading all physical volumes.  This may take a while...
>   No volume groups found
> Activating logical volumes
>   Volume group "VolGroup00" not found
> Creating root device.
> Mounting root filesystem.
> mount: could not find filesystem '/dev/root'
> Setting up other filesystems.
> Setting up new root fs
> setuproot: moving /dev failed: No such file or directory
> no fstab.sys, mounting internal defaults
> setuproot: error mounting /proc: No such file or directory
> setuproot: error mounting /sys: No such file or directory
> Switching to new root and running init.
> unmounting old /dev
> unmounting old /proc
> unmounting old /sys
> switchroot: mount failed: No such file or directory
> Kernel panic - not syncing: Attempted to kill init!
> 
> Looks is not finding the dom-u disk.
> 
> In both cases I'm using almost the same settings:
> 
> name = "centos5"
> uuid = "5020979f-8dae-105d-df56-9fb28d377aa2"
> bootloader = "/usr/bin/pygrub"
> memory = 2048
> on_poweroff = "destroy"
> on_reboot = "restart"
> on_crash = "restart"
> disk = [ "tap:aio:/ext4/centos5/disk.img,xvda,w" ]
> vif = [ "mac=X:X:X:X:X:X,bridge=xenbr0,script=vif-bridge" ]
> 
> The main line of centos stock without Xen continue using kernel 2.6.x,
> but Xen is using the new line 3.x.
> 
> Anyone else with this issue?
> 
> Thanks for your time.
> _______________________________________________
> CentOS-virt mailing list
> CentOS-virt at centos.org
> http://lists.centos.org/mailman/listinfo/centos-virt