hello all,
i want to have ooh323 connection between asterisk and cisco. in my
scenario, asterisk is gateway and cisco is gatekeeper.
this is my ooh323.conf file:
[general]
port=1720
bindaddr=192.168.0.227
gateway=yes
faststart=yes
h245tunneling=yes
h323id=gw10 at test.com
settracelevel=10
gatekeeper=192.168.0.212
context=from-trunk
disallow=all
allow=ulaw
allow=alaw
allow=gsm
dtmfmode=rfc2833
with this config, gateway is registered in cisco gatekeeper correctly. but
when i want to call from it, cisco reject my gateway and h225 asn1 messages
say "incomplete address".
i searched a lot and understand that, if a cisco router acts as gateway, it
sends h323-id as well as dialed number for gatekeeper but my gateway(which
is asterisk), only send dialed number. therefore cisco gatekeeper doesn't
know how route this call and reject it.
if i define e164 number in ooh323.conf file, every thing is ok and call
routed correctly.
my question is: can asterisk work with cisco gatekeeper just by h323-id? if
yes, how i can do this? in the other words, is it necessary to define e164
number in ooh323.conf file to have a correct connection or not?
thanks in advance
SAM
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://lists.digium.com/pipermail/asterisk-users/attachments/20130708/74ffaf73/attachment.htm>
