search for: h323id

...PSTN. my h323.conf setting ; Objective System's H323 Configuration example for tvcti ; ooh323c driver configuration ; ; [general] section defines global parameters ; ; This is followed by profiles which can be of three types - user/peer/friend ; Name of the user profile should match with the h323id of the user device. ; For peer/friend profiles, host ip address must be provided as "dynamic" is ; not supported as of now. ; ; Syntax for specifying a H323 device in extensions.conf is ; For Registered peers/friends profiles: ; H323/name where name is the name of the peer/friend p...

...2006-10-18 18:35:57 UTC ; Objective System's H323 Configuration example for Asterisk ; ooh323c driver configuration ; ; [general] section defines global parameters ; ; This is followed by profiles which can be of three types - user/peer/friend ; Name of the user profile should match with the h323id of the user device. ; For peer/friend profiles, host ip address must be provided as "dynamic" is ; not supported as of now. ; ; Syntax for specifying a H323 device in extensions.conf is ; For Registered peers/friends profiles: ; OOH323/name where name is the name of the peer/friend...

...Config on Asterisk box: ; Objective System's H323 Configuration example for Asterisk ; ooh323c driver configuration ; ; [general] section defines global parameters ; ; This is followed by profiles which can be of three types - user/peer/friend ; Name of the user profile should match with the h323id of the user device. ; For peer/friend profiles, host ip address must be provided as "dynamic" is ; not supported as of now. ; ; Syntax for specifying a H323 device in extensions.conf is ; For Registered peers/friends profiles: ; OOH323/name where name is the name of the peer/friend...

I have tried everything. to register with this gatekeeper to make and receive calls These are the details I received from the voip provider: protocol H.323 Gatekeeper Address - AVS@210.21.118.XXX Port - 1719 RAS - 53 Q931 - 80 h245 - 1722 RTP - 1722 Username - H323 I have 2 phone number/accounts with this gatekeeper that I need to register to. ID - HMA0200.10szxn-xxxx e.164 - 22xx2912

...ets; do | | echo "The opinions here in no way reflect the opinions of my $a $b." | | done; done | +=========================================================================+ -------------- next part -------------- [general] h323id=QubeTalkECS callerid=QubeTalkECS gatekeeper=DISABLE ; DISCOVER or IP addy logfile=/var/spool/asterisk/log/h323_log gateway=no ; or yes faststart=yes h245tunneling=yes port=1720 bindaddr=0.0.0.0 context=default [6970] ip=192.168.1.160 type=friend context=phones disallow=all allow=alaw allow=ulaw h3...

...2.17.68 ooh323.conf ; Objective System's H323 Configuration example for Asterisk ; ooh323c driver configuration ; ; [general] section defines global parameters ; ; This is followed by profiles which can be of three types - user/peer/friend ; Name of the user profile should match with the h323id of the user device. ; For peer/friend profiles, host ip address must be provided as "dynamic" is ; not supported as of now. ; ; Syntax for specifying a H323 device in extensions.conf is ; For Registered peers/friends profiles: ; OOH323/name where name is the name of the peer/friend...

I am having a slight issue. I am trying to register 2 asterisk boxes with GNUGK and when I try to add the 2nd it gets denied cause of it saying its a duplicate. How do I change the configs to allow more than one asterisk box register to the same GK? brian This email was scanned by: Mcafee GroupShield ---------------- CONFIDENTIAL DISCLAMER ---------------- All information provided in this

...-- USER ENTERED 'THE PIN NUMBER' Jan 19 10:00:43 VERBOSE [7177] logger.c: -- Executing [1000 at ext-meetme:8] GotoIf("DAHDI/2-1", "1?USER") in new stack My H323.conf file: [general] port=1720 bindaddr=ip address of asterisk gateway=no faststart=yes h245tunneling=yes h323id=ObjSysAsterisk e164=100 callerid=asterisk gatekeeper = DISABLE context=default disallow=all allow=ulaw dtmfmode=rfc2833 progress_setup = 8 progress_alert = 8 [denver] type=friend port=1720 ip=ip address of avaya context=from-internal disallow=all allow=ulaw rtptimeout=90 --=_547786e350c4eb49e9...

...Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 2 router-h323-gw# Over at the Asterisk box I have the following in ooh323.conf: [general] ;Define the asetrisk server h323 endpoint bindaddr=0.0.0.0 port=1720 gateway=yes h323id=Asterisk e164=100 gatekeeper = 192.168.1.6 [cisco-gk] type=peer ip=192.168.1.6 port=1720 context=from-h323 disallow=all allow=alaw allow=ulaw allow=gsm rtptimeout=60 dtmfmode=rfc2833 h323id=PABX I have the Cisco document "Understandin...

...all, i have big problems to make a h323 call over the gatekeeper from my provider. The provider demanded following account data: H323 ID: XXX-XXX-XX-X DetinationNumer: XXXXXXXXXXX I have configured the oh323.conf following: gatekeeper=XX.XX.XXX.XXX alias=XXX-XXX-XX-X Isx the alias equal to the h323id ? And how i have to make a call with the dial app ? I have following config: exten => _01099X.,1,Dial,OH323/${EXTEN:7} exten => _01099X.,2,Hangup I thought it would be enough when i give the destination number if i registered at the gk, isn't it ? Or is a ip and something like a use...

...| | | ---------------- ---------------- ---------------- | Damm Tetra | | Cisco Router | | Asterisk PBX | | (OpenH323) | | GateKeeper | | (ooh323) | | H323ID=DAMM | | Zone=THORCOM | | H323ID=PABX | | Nos=817XXXX | | | | Nos=810XXXX | ---------------- ---------------- ---------------- I started on the hope of using the GNU GateKeeper 2.2.5 but ran into lots of problems on my Fedor...

...ed 'the pin number' Jan 19 10:00:43 VERBOSE [7177] logger.c: -- Executing [1000 at ext-meetme:8] GotoIf("DAHDI/2-1", "1?USER") in new stack My H323.conf file: [general] port=1720 bindaddr=ip address of asterisk gateway=no faststart=yes h245tunneling=yes h323id=ObjSysAsterisk e164=100 callerid=asterisk gatekeeper = DISABLE context=default disallow=all allow=ulaw dtmfmode=rfc2833 progress_setup = 8 progress_alert = 8 [denver] type=friend port=1720 ip=ip address of avaya context=from-internal disallow=all allow=ulaw rtptimeout=90 --0-85965953...

I have experience problems like this in a different scenario. It is usually due to codec translation problem. What is the default codec set on CCM for the IP Phone and the default set in Asterisk? Make sure the defaults are the same. Try G.711 Michael

...) message received ERROR:No Gatekeeper ID present in received GKconfirmed message Ignoring message and will retransmit GRQ after timeout Error: Failed to handle received RAS message" This is my ooh323.conf file: [general] port=1720 bindaddr=130.177.137.214 ;the address of my Asterisk server h323id=ObjSysAsterisk e164=100100 callerid=asterisk gateway=yes gatekeeper = 192.57.108.112 ;the address of my Tandberg GK faststart=yes h245tunneling=yes context=default disallow=all allow=gsm allow=ulaw allow=alaw dtmfmode=rfc2833 [myuser1] type=user context=context1 disallow=all allow=gsm allow=ula...

...wered > OOH323/(null)-3074 > > [2008-07-02 15:49:08] WARNING[21544]: > chan_ooh323.c:1053 > > ooh323_indicate: Don't know how to indicate condition > 20 on ooh323c_5 > > > > My ooh323.conf: > > > > [general] > > bindaddr=192.168.1.9 > > h323id=ObjSysAsterisk > > e164=100 > > callerid=asterisk > > gatekeeper = DISABLE > > gateway = yes > > context = h323 > > disallow = all > > allow = ulaw > > dtmfmode = rfc2833 > > > > > > extensions.conf > > [h323] > > Exten...

I am using H.323 to create a trunk between Asterisk and Avaya IP Office system. Everything is working correctly, Asterisk can call Avaya and vise versa. Now I create a conference room with a user pin in Asterisk. Avaya can call into the conference room, but can enter the pin number. The error message they are getting is the "invalid pin number". However the pin number works if they

hello all, i want to have ooh323 connection between asterisk and cisco. in my scenario, asterisk is gateway and cisco is gatekeeper. this is my ooh323.conf file: [general] port=1720 bindaddr=192.168.0.227 gateway=yes faststart=yes h245tunneling=yes h323id=gw10 at test.com settracelevel=10 gatekeeper=192.168.0.212 context=from-trunk disallow=all allow=ulaw allow=alaw allow=gsm dtmfmode=rfc2833 with this config, gateway is registered in cisco gatekeeper correctly. but when i want to call from it, cisco reject my gateway and h225 asn1 messages say &qu...

hello all, i want to have ooh323 connection between asterisk and cisco. in my scenario, asterisk is gateway and cisco is gatekeeper. this is my ooh323.conf file: [general] port=1720 bindaddr=192.168.0.227 gateway=yes faststart=yes h245tunneling=yes h323id=gw10 at test.com settracelevel=10 gatekeeper=192.168.0.212 context=from-trunk disallow=all allow=ulaw allow=alaw allow=gsm dtmfmode=rfc2833 with this config, gateway is registered in cisco gatekeeper correctly. but when i want to call from it, cisco reject my gateway and h225 asn1 messages say &qu...

...hone](!) type=friend secret=1234 context=LocalSets host=dynamic nat=force_rport,comedia dtmfmode=auto disallow=all allow=alaw allow=ulaw port=5060 [426](office-phone) [427](office-phone) ooh323.conf: [general] port=1720 bindaddr=0.0.0.0 gateway=no canreinvite=no faststart=yes h245tunneling=yes h323id=ObjSysAsterisk e164=100 callerid=asterisk gatekeeper = DISABLE context=trunk disallow=all allow=alaw allow=ulaw dtmfmode=outofband [avaya] type=friend ip=192.168.1.150 ; IP address of the Avaya port=1720 extensions.conf: [general] static=yes writeprotect=no autofallthrough=yes clearglobalvars=...

I'm trying to set-up H.323 support under Asterisk. I built a recent CVS release and the ooh323c code from the asterisk-addons. Everything built and installed and the H.323 stuff loads OK when asterisk starts. What is the easiest way to check if the H.323 code is working? I've edited the h323.conf and extensions.conf files but I'm sure that things aren't right. I've