search for: h225

...cent to older ones like 1.4.9 and both chan_h323 and oh323 and have no success. Here's trace output from chan_h323: 0:26.010 H323 Listener:80f1b50 transports.cxx(1423) H323TCP Started connection: host=XXX.XXX.XXX.251:1094, if=XXX.XXX.XXX.252:1720, handle=27 0:26.011 H225 Answer:40419ae0 transports.cxx(524) H225 Started incoming call thread 0:26.011 H225 Answer:40419ae0 transports.cxx(984) H225 Awaiting first PDU 0:26.029 H225 Answer:40419ae0 h323pdu.cxx(474) H225 Receiving PDU: setup 0:26.029 H225 Answer:40419ae...

...Found capability: G.729{hw} <3> 2:21.278 ThreadID=0x49399b30 RFC2833 Handler created 2:21.278 ThreadID=0x49399b30 H323 Added capability: G.729{hw} <1> 2:21.278 ThreadID=0x49399b30 H323 Created new connection: ip$localhost/23866 2:21.279 H225 Caller:80f1490 H225 Started call thread 2:21.328 H225 Caller:80f1490 H323TCP Started connection: host=192.168.1.80:1720, if=192.168.1.50:10001, handl$ 2:21.328 H225 Caller:80f1490 H225 Sending Setup PDU 2:21.329 H225 Caller:80f1490 H225 Check for Fast start...

...1.107 1:21:34.937 ThreadID=0x06f2bbb0 rfc2833.cxx(81) RFC2833 Handler created 1:21:34.971 ThreadID=0x06f2bbb0 h323ep.cxx(1393) H323 Created new connection: ip$localhost/8176 1:21:34.971 ThreadID=0x06f2bbb0 tlibthrd.cxx(688) PWLib Created thread 0x834f9d0 H225 Caller:%0x -- Called 192.168.1.107 H225 Caller:834f9d0 tlibthrd.cxx(1199) PWLib Started thread 0x834f9d0 H225 Caller:834f9d0 1:21:34.978 H225 Caller:834f9d0 h323ep.cxx(712) H225 Started call thread 1:21:34.984 H225 Caller:834f9d0 transports.cxx(1578) H323TC...

Hello All, I am trying to setup a SIP to H323 system using SER, Asterisk And GnuGK. Following is the configuration: CISCO ATA (NAT) -> SER -> ASTERISK -> GNUGK My Cisco ATA is registered with SER and When I dial a number, SER forwards the call to Asterisk, and Asterisk forwards the call to the GateKeper. This is ok, call reaches the gatekeeper, however the gatekeeper drops the call

...H323 Found capability: G.711-uLaw-64k{sw} <1> 0:16.937 ThreadID=0xf3bfebb0 rfc2833.cxx(81) RFC2833 Handler created 0:16.937 ThreadID=0xf3bfebb0 h323ep.cxx(1393) H323 Created new connection: ip$localhost/29016 -- Called 123@192.168.254.250 16.938 H225 Caller:9fdc730 h323ep.cxx(712) H225 Started call thread 0:16.984 H225 Caller:9fdc730 transports.cxx(1485) H323TCP Started connection: host=192.168.254.250:1720, if=192.168.69.1:32831, handle=34 0:16.985 H225 Caller:9fdc730 h323.cxx(2760) H225 Sending Se...

...ort (chan_h323 from Jeremy McNamara). But experience problem while connecting OpenPhone to Asterisk Here is h.323 trace: 5:37.444 H323 Listener:9c86de0 transports.cxx(1504) H323TCP Started connection: host=10.120.160.15:3172, if=10.120.160.99:1720, handle=27 5:37.444 H225 Answer:9cc1250 transports.cxx(564) H225 Started incoming call thread 5:37.445 H225 Answer:9cc1250 transports.cxx(1127) H225 Awaiting first PDU 5:37.470 H225 Answer:9cc1250 h323pdu.cxx(517) H225 Receiving PDU: setup 5:37.471 H225 Answer:9cc1250 tra...

...e540 H323 Found capability: UserInput/RFC2833 <5> > 0:05.833 ThreadID=0x495be540 RFC2833 Handler created > 0:05.833 ThreadID=0x495be540 H323 Added capability: G.729A{hw} <1> > 0:05.833 ThreadID=0x495be540 H323 Created new connection: ip$localhost/12098 > 0:05.834 H225 Caller:8131128 H225 Started call thread > 0:06.043 H225 Caller:8131128 H323TCP Started connection: host=216.52.153.206:1720, if=217.168.168.5:5004, handle=64 > 0:06.044 H225 Caller:8131128 H225 Sending Setup PDU > 0:06.044 H225 Caller:8131128 H225 Check for Fast start by...

...]==<asterisk>==[IPSEC VPN 192.168.0.0/24 - 10.0.0.0/24] ==<altigen server>==[10.0.0.0/24]==<altigen phone{8810}> It seems that the altigen is sending a ReleaseComplete and dropping the call before it gets routed to the snom190. Here's an h.323 trace 9: 0:26.489 H225 Answer:9a33350 transports.cxx(1136) H225 Incoming call, first PDU: callReference=1471 0:26.492 H225 Answer:9a33350 h323caps.cxx(1942) H323 Added capability: G.711-uLaw-64k <1> 0:26.496 H225 Answer:9a33350 h323caps.cxx(1942) H323 Added capability:...

...hing wrong with this url ? Before i installed the new stuff it worked so. Can somebody help? Thanks, Thomas. Here the trace level 2 log in oh323.log: 0:30.808 H323 Listener:80f24d8 H323TCP Started connection: host=172.20.23.206:1752, if=172.20.0.150:1720, handle=11 0:39.475 H225 Answer:80db018 H225 Failed to get initial Q.931 PDU, connection not started. 1:12.973 H323 Listener:80f24d8 H323TCP Started connection: host=172.20.23.206:1753, if=172.20.0.150:1720, handle=11 1:12.996 H225 Answer:80db018 H225 Set remote application name: "Microsoft?...

...SetCapability negotiation 0:01.163 OpenH323 Wrapper RAS Authenticator MD5<no-pwd> not active during GRQ SetCapability negotiation 0:01.163 OpenH323 Wrapper RAS Authenticator CAT<no-pwd> not active during GRQ SetCapability negotiation 0:01.163 OpenH323 Wrapper H225 Started gatekeeper discovery of "ip$10.0.0.2" 0:01.164 OpenH323 Wrapper RAS Gatekeeper discovery on interface: 10.0.254.230:10001 0:01.164 OpenH323 Wrapper Trans Sending PDU: gatekeeperRequest 37495 0:01.164 H323 Listener:9dea7d0 H323 Awaiting TCP connections on port...

Hi Michael and Everyone I'm trying to connect Asterisk to a CISCO AS5350 using oh323 and I'm getting this error "reason 24 (Call ended with Q.931 cause)" I've checked the Asterisk wiki and several other resources. Please can anyone give me a hint on what the problem is I reach my wits end. Thanks Tola my config and debug Configuration of OpenH323 channel driver

...Making call to 0797617729@xxx.xxx.xxx.xxx using gatekeeper. == New H.323 Connection created. -- sj1 is calling host 0797617729@xxx.xxx.xxx.xxx -- Call token is ip$localhost/28087 -- Call reference is 28087 -- Called 0797617729@xxx.xxx.xxx.xxx 1:56.153 H225 Caller:813bbe0 h323trans.cxx(656) Trans Timeout on request seqnum=14213, try #1 of 2 1:59.163 H225 Caller:813bbe0 h323trans.cxx(656) Trans Timeout on request seqnum=14213, try #2 of 2 -- Sending SETUP message -- Received Facility message... -- Received F...

...0X.,3,Dial(Zap/g2/${EXTEN}) >exten => _4420X.,4,Congestion >exten => _2220X.,5,Hangup >exten => _011X.,1,Answer >exten => _011X.,2,Wait(2) >exten => _011X.,3,Dial(Zap/g2/${EXTEN:3}) >exten => _011X.,4,Congestion > >Thanks This is my log output 5:58.621 H225 Answer:41b3f3c8 H225 Incoming call accepted 5:58.626 H225 Answer:41b3f3c8 H323 Answering call: AnswerCallDeferredWithMedia 5:58.629 H225 Answer:41b3f3c8 H323 InternalEstablishedConnectionCheck: connectionState=AwaitingLocalAnswer fastStartState=FastStartDisabled 5:58.629 H225 Answe...

...: UserInput/RFC2833 <5> 8:14.906 ThreadID=0x4a774440 RFC2833 Handler created 8:14.906 ThreadID=0x4a774440 H323 Added capability: G.711-ALaw-64k{hw} <1> 8:14.907 ThreadID=0x4a774440 H323 Created new connection: ip$localhost/25259 8:14.908 H225 Caller:80f4688 H225 Started call thread 8:15.064 H225 Caller:80f4688 H323TCP Could not connect to 16.52.153.2 06:1720 (local port=10000) - No route to host(113) 8:15.065 H225 Caller:80f4688 H323 Clearing connection ip$localhost /25259 reason=EndedByConnectFail 8:15.065...

i am trying to make calls between two workstations using netmeeting and asterisk. i get the popup on both when i call the extensions 665 and 667 but when accept, i get this error *CLI> 0:18.190 H225 Caller:8112978 H225 Received connect PDU. 0:18.288 H245:810b388 H245 Read error: Bad file descriptor 0:18.318 H323 Cleaner H323 Connection ip$localhost/25430 terminated. WARNING[23576]: File pbx.c, Line 1702 (ast_pbx_run): Timeout, but no rule 't...

...imple switch on 'Zap/1-1' -- Executing Answer("Zap/1-1", "") in new stack -- Executing Dial("Zap/1-1", "OH323/00123456@XXX.XXX.XXX.XXX|20|r") in ne w stack WrapH323Connection::WrapH323Connection: WrapH323Connection created. 0:34.852 H225 Caller:80e7c08 H225 Read error (104): Connection res et by peer 0:34.856 H225 Caller:80e7c08 H225 Write PDU failed (32): Broken pi pe 0:34.859 H323 Cleaner H323 Connection ip$localhost/20045 te rminated. WrapH323Connection::WrapH323Connection: WrapH323Connectio...

I'm just curious if anyone has the X100P & Callerid receiving working outside US. Replies are appreciated. Also if it's not working for you in a certain coutry you can respond too. regards Martin

...the Janus release of pwlib/openh323, by editing the makefile as per the comments. Call setup and cleardown seems to work fine, but no audio is being passed in either direction. Doing an "h.323 trace 9", I noticed the following sequence at the end of the call setup: h323.cxx(1685) H225 Handling PDU: Connect callRef=13295 h323.cxx(1925) H225 Set protocol version to 4 h323.cxx(2152) H225 Set remote party name: "root [192.168.0.20]" h323.cxx(2160) H225 Set remote application name: "The NuFone Network's H.323 Channel Driver for Asterisk...

...on port 42420 Incoming connection from 127.0.0.1 0:02.840 WoomeraThread:8432b58 woomera.cxx(763) Woomera Sending command EVENT HELLO 0 1.0 Post Increment 0:02.841 WoomeraThread:8432b58 woomera.cxx(736) Woomera Sending response 200 Listener enabled 0:23.893 H225 Answer:b6f00ae0 woomera.cxx(763) Woomera Sending command EVENT INCOMING 1 Incoming connection from 127.0.0.1 0:23.912 WoomeraThread:b6f16740 woomera.cxx(763) Woomera Sending command EVENT HELLO 0 1.0 Post Increment 0:23.913 WoomeraThread:b6f16740 woomera.cxx(736)...

...ith a SIP load, and a Cisco 2600 router with an FXO port. Asterisk talks to the router via h323 and opens a call and connects with no problem. At exactly 74 secs (timer on the phone) the call drops, and Asterisks displays this message: -- H323:29764 answered SIP/6000-9794 15:20.606 H225 Caller:80eea08 H225 Received connect PDU. ******************************** **** CONTROL PROTOCOL ERROR **** * Roundtrip Delay * ******************************** -- Hungup 'H323:29764' == Spawn extension (default, 5500, 1) exited non-zero on 'SIP/6000-9794' A...