thr3ads.net - asterisk users - [asterisk-users] My new Polycom 450's can't xfer to 4-digit extension [May 2013]

If this information is useful, please help other people find it:
Share via:

Mike Diehl

2013-May-05 00:43 UTC

[asterisk-users] My new Polycom 450's can't xfer to 4-digit extension

Hi all.

I just installed bunch of IP450's and everything went well and my
customer is happy.... except that they are unable to transfer calls to
other extenstions.

They can dial them directly just fine.

However, when the user is in a call and presses the transfer soft key,
they get dial tone, and start typing the extension, say 1008.  But by
the time they get 100 typed in, the phone tries to dial and the
transfer fails.  I feel sure that it's a dial plan issue on the phone.

We are running:

PolycomSoundPointIP-SPIP_450-UA/3.3.3.0094

The dialplan section of the sip.cfg provisioning file is:

   <dialplan dialplan.1.impossibleMatchHandling="0"
dialplan.1.removeEndOfDial="1"
dialplan.1.applyToUserSend="1"
dialplan.1.applyToUserDial="1"
dialplan.1.applyToCallListDial="0"
dialplan.1.applyToDirectoryDial="0"
dialplan.2.impossibleMatchHandling="0"
dialplan.2.removeEndOfDial="1"
dialplan.2.applyToUserSend="1"
dialplan.2.applyToUserDial="1"
dialplan.2.applyToCallListDial="0"
dialplan.2.applyToDirectoryDial="0"
dialplan.3.impossibleMatchHandling="0"
dialplan.3.removeEndOfDial="1"
dialplan.3.applyToUserSend="1"
dialplan.3.applyToUserDial="1"
dialplan.3.applyToCallListDial="0"
dialplan.3.applyToDirectoryDial="0"
dialplan.4.impossibleMatchHandling="0"
dialplan.4.removeEndOfDial="1"
dialplan.4.applyToUserSend="1"
dialplan.4.applyToUserDial="1"
dialplan.4.applyToCallListDial="0"
dialplan.4.applyToDirectoryDial="0"
dialplan.5.impossibleMatchHandling="0"
dialplan.5.removeEndOfDial="1"
dialplan.5.applyToUserSend="1"
dialplan.5.applyToUserDial="1"
dialplan.5.applyToCallListDial="0"
dialplan.5.applyToDirectoryDial="0"
dialplan.6.impossibleMatchHandling="0"
dialplan.6.removeEndOfDial="1"
dialplan.6.applyToUserSend="1"
dialplan.6.applyToUserDial="1"
dialplan.6.applyToCallListDial="0"
dialplan.6.applyToDirectoryDial="0">
      <digitmap dialplan.1.digitmap=""
dialplan.1.digitmap.timeOut=""
dialplan.2.digitmap="" dialplan.2.digitmap.timeOut=""
dialplan.3.digitmap="" dialplan.3.digitmap.timeOut=""
dialplan.4.digitmap="" dialplan.4.digitmap.timeOut=""
dialplan.5.digitmap="" dialplan.5.digitmap.timeOut=""
dialplan.6.digitmap="" dialplan.6.digitmap.timeOut=""/>
      <routing>
         <server dialplan.1.routing.server.1.address=""
dialplan.1.routing.server.1.port=""
dialplan.2.routing.server.1.address=""
dialplan.2.routing.server.1.port=""
dialplan.3.routing.server.1.address=""
dialplan.3.routing.server.1.port=""
dialplan.4.routing.server.1.address=""
dialplan.4.routing.server.1.port=""
dialplan.5.routing.server.1.address=""
dialplan.5.routing.server.1.port=""
dialplan.6.routing.server.1.address=""
dialplan.6.routing.server.1.port=""/>
         <emergency dialplan.1.routing.emergency.1.value=""
dialplan.1.routing.emergency.1.server.1=""
dialplan.2.routing.emergency.1.value=""
dialplan.2.routing.emergency.1.server.1=""
dialplan.3.routing.emergency.1.value=""
dialplan.3.routing.emergency.1.server.1=""
dialplan.4.routing.emergency.1.value=""
dialplan.4.routing.emergency.1.server.1=""
dialplan.5.routing.emergency.1.value=""
dialplan.5.routing.emergency.1.server.1=""
dialplan.6.routing.emergency.1.value=""
dialplan.6.routing.emergency.1.server.1=""/>
      </routing>
   </dialplan>

The same section of the phone1.cfg file is:

   <dialplan dialplan.1.impossibleMatchHandling="0"
dialplan.1.removeEndOfDial="1"
dialplan.1.applyToUserSend="1"
dialplan.1.applyToUserDial="1"
dialplan.1.applyToCallListDial="0"
dialplan.1.applyToDirectoryDial="0"
dialplan.2.impossibleMatchHandling="0"
dialplan.2.removeEndOfDial="1"
dialplan.2.applyToUserSend="1"
dialplan.2.applyToUserDial="1"
dialplan.2.applyToCallListDial="0"
dialplan.2.applyToDirectoryDial="0"
dialplan.3.impossibleMatchHandling="0"
dialplan.3.removeEndOfDial="1"
dialplan.3.applyToUserSend="1"
dialplan.3.applyToUserDial="1"
dialplan.3.applyToCallListDial="0"
dialplan.3.applyToDirectoryDial="0"
dialplan.4.impossibleMatchHandling="0"
dialplan.4.removeEndOfDial="1"
dialplan.4.applyToUserSend="1"
dialplan.4.applyToUserDial="1"
dialplan.4.applyToCallListDial="0"
dialplan.4.applyToDirectoryDial="0"
dialplan.5.impossibleMatchHandling="0"
dialplan.5.removeEndOfDial="1"
dialplan.5.applyToUserSend="1"
dialplan.5.applyToUserDial="1"
dialplan.5.applyToCallListDial="0"
dialplan.5.applyToDirectoryDial="0"
dialplan.6.impossibleMatchHandling="0"
dialplan.6.removeEndOfDial="1"
dialplan.6.applyToUserSend="1"
dialplan.6.applyToUserDial="1"
dialplan.6.applyToCallListDial="0"
dialplan.6.applyToDirectoryDial="0">
      <digitmap dialplan.1.digitmap=""
dialplan.1.digitmap.timeOut=""
dialplan.2.digitmap="" dialplan.2.digitmap.timeOut=""
dialplan.3.digitmap="" dialplan.3.digitmap.timeOut=""
dialplan.4.digitmap="" dialplan.4.digitmap.timeOut=""
dialplan.5.digitmap="" dialplan.5.digitmap.timeOut=""
dialplan.6.digitmap="" dialplan.6.digitmap.timeOut=""/>
      <routing>
         <server dialplan.1.routing.server.1.address=""
dialplan.1.routing.server.1.port=""
dialplan.2.routing.server.1.address=""
dialplan.2.routing.server.1.port=""
dialplan.3.routing.server.1.address=""
dialplan.3.routing.server.1.port=""
dialplan.4.routing.server.1.address=""
dialplan.4.routing.server.1.port=""
dialplan.5.routing.server.1.address=""
dialplan.5.routing.server.1.port=""
dialplan.6.routing.server.1.address=""
dialplan.6.routing.server.1.port=""/>
         <emergency dialplan.1.routing.emergency.1.value=""
dialplan.1.routing.emergency.1.server.1=""
dialplan.2.routing.emergency.1.value=""
dialplan.2.routing.emergency.1.server.1=""
dialplan.3.routing.emergency.1.value=""
dialplan.3.routing.emergency.1.server.1=""
dialplan.4.routing.emergency.1.value=""
dialplan.4.routing.emergency.1.server.1=""
dialplan.5.routing.emergency.1.value=""
dialplan.5.routing.emergency.1.server.1=""
dialplan.6.routing.emergency.1.value=""
dialplan.6.routing.emergency.1.server.1=""/>
      </routing>
   </dialplan>

The MAC-specific provisioning file does not have a dialplan  section.

All of my Polycom users share these files and many of them can
transfer to 4-digit extensions.  Is there something I need to do for
the 450 to make this work?

Thank you in advance.

Mike Diehl.

Doug Lytle

2013-May-05 11:03 UTC

head link

[asterisk-users] My new Polycom 450's can't xfer to 4-digit extension

Mike Diehl wrote:>   Is there something I need to do for
> the 450 to make this work?
As far as I know, all the Polycoms require a digit map that isn't 
blank.  You're digit maps are blank.  There are two place you can have 
digit maps.  In the individual phone configs and in the master sip.cfg.

A digit map for one of my 550s are below:

dialplan.1.digitmap="8[0-9]|0T|1x|4[4-5]|011xxx.T|*7|*xxx|*xx.T|04xxx|700|9,1[2-9]xxxxxxxxx|9,[2-9]xxxxxx|[2-8]xxx"

I'd suggest looking into your master phone template for the bad digit 
map if as you say, the sip.cfg doesn't contain one.

Doug

-- 
Ben Franklin quote:

"Those who would give up Essential Liberty to purchase a little Temporary
Safety, deserve neither Liberty nor Safety."

Dave Fullerton

2013-May-06 14:33 UTC

head link

[asterisk-users] My new Polycom 450's can't xfer to 4-digit extension

On 05/04/2013 08:43 PM, Mike Diehl wrote:> Hi all.
>
> I just installed bunch of IP450's and everything went well and my
> customer is happy.... except that they are unable to transfer calls to
> other extenstions.
>
> They can dial them directly just fine.
>
> However, when the user is in a call and presses the transfer soft key,
> they get dial tone, and start typing the extension, say 1008.  But by
> the time they get 100 typed in, the phone tries to dial and the
> transfer fails.  I feel sure that it's a dial plan issue on the phone.
>
> We are running:
>
> PolycomSoundPointIP-SPIP_450-UA/3.3.3.0094
>
> The dialplan section of the sip.cfg provisioning file is:
>
>     <dialplan dialplan.1.impossibleMatchHandling="0"
> dialplan.1.removeEndOfDial="1"
dialplan.1.applyToUserSend="1"
> dialplan.1.applyToUserDial="1"
dialplan.1.applyToCallListDial="0"
> dialplan.1.applyToDirectoryDial="0"
<snip>>        <digitmap dialplan.1.digitmap=""
dialplan.1.digitmap.timeOut=""
> dialplan.2.digitmap="" dialplan.2.digitmap.timeOut=""
> dialplan.3.digitmap="" dialplan.3.digitmap.timeOut=""
<snip>> The same section of the phone1.cfg file is:
>
>     <dialplan dialplan.1.impossibleMatchHandling="0"
> dialplan.1.removeEndOfDial="1"
dialplan.1.applyToUserSend="1"
> dialplan.1.applyToUserDial="1"
dialplan.1.applyToCallListDial="0"
<snip>> dialplan.6.applyToDirectoryDial="0">
>        <digitmap dialplan.1.digitmap=""
dialplan.1.digitmap.timeOut=""
> dialplan.2.digitmap="" dialplan.2.digitmap.timeOut=""<snip>
>        </routing>
>     </dialplan>
>
> The MAC-specific provisioning file does not have a dialplan  section.
>
> All of my Polycom users share these files and many of them can
> transfer to 4-digit extensions.  Is there something I need to do for
> the 450 to make this work?
>
> Thank you in advance.
>
> Mike Diehl.
>
You really should configure the dialplan.digitmap attribute. I don't 
know why the other polycom phones are working and the 450's are not, but 
I believe the combination of not having a digitmap configured and having 
dialplan.impossibleMatchHandling set to 0 is what is causing the 
problem. You could try setting dialplan.impossibleMatchHandling to 2 for 
the short term, but configuring the digitmap to match your environment 
is the best solution. Check the SIP admin guide for details on how to 
set it up.

-Dave

Reasonably Related Threads

Search for more maybe matching threads

asterisk users - May 2013 - My new Polycom 450's can't xfer to 4-digit extension

[asterisk-users] My new Polycom 450's can't xfer to 4-digit extension

[asterisk-users] My new Polycom 450's can't xfer to 4-digit extension

[asterisk-users] My new Polycom 450's can't xfer to 4-digit extension

Reasonably Related Threads