I have a problem with a Sangoma card. It worked until yesterday. Now I keep getting this error: Jul 29 17:45:17 pbxacura kernel: wanpipe1: Enable E1 CAS signalling mode! Jul 29 17:45:17 pbxacura kernel: wanpipe1:w1g1: Rx Error: No 'DeviceSelect' from target: pci fatal error! (0x000FA000) Jul 29 17:45:48 pbxacura last message repeated 30946 times It is using Wanpipe 3.5.6 and Zaptel 1.4.12.1 with Asterisk 1.4.30 and MFC/R2. The E1 shows Tx side blocked and no calls in or out. I reinstalled Wanpipe and Zaptel but I keep getting the same error. -- Telecomunicaciones Abiertas de M?xico S.A. de C.V. Carlos Ch?vez Prats Director de Tecnolog?a +52-55-91169161 ext 2001 -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 198 bytes Desc: This is a digitally signed message part Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20100729/4a78e114/attachment.pgp
----- "Carlos Chavez" <cursor at telecomabmex.com> wrote:> I have a problem with a Sangoma card. It worked until yesterday. > Now > I keep getting this error: > > Jul 29 17:45:17 pbxacura kernel: wanpipe1: Enable E1 CAS signalling > mode! > Jul 29 17:45:17 pbxacura kernel: wanpipe1:w1g1: Rx Error: No > 'DeviceSelect' from target: pci fatal error! (0x000FA000) > Jul 29 17:45:48 pbxacura last message repeated 30946 times > > It is using Wanpipe 3.5.6 and Zaptel 1.4.12.1 with Asterisk 1.4.30 > and > MFC/R2. The E1 shows Tx side blocked and no calls in or out. I > reinstalled Wanpipe and Zaptel but I keep getting the same error. >Sounds like your card needs to be: 1. Reseated in it's PCI slot 2. RMA'ed to Sangoma Either way, contact Sangoma's top notch tech support and they'll either help you fix the issue or get you a replacement. --Tim