search for: reseated

Question: After about having the server running for about an hour, our callers occationally hear a high pitched beep that lasts the entire call. In some cases, the noise doesn't start until a minute or 2 into the call, while others last the entire call. In some of the more serious cases, calls are dropped after the noise has occurred as well. Another symptom has been really bad static on a

...1711 PCI PErr Slot 1 E171F PCIE Fatal Error B0 D4 F0. The Dell hardware owners manual states that it means the system BIOS has reported a PCI parity error on a component that resides in PCI configuration space at bus 0, device 4, function 0 and advises that the PCI expansion card be removed and reseated. Any suggestions on what exactly might be causing this are welcome. Thanks. Joseph -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20071023/22dbcaff/attachment.htm

...connected a network cable, wondering if it's in wake-on-lan; I've tried connecting to it via its management port, and *zip*. I'm not going to do, as several folks' posts that I googled (been at that for hours), cut the cable and solder in an on/off switch. I have taken the lid uff, reseated the PSUs, and the cable connecting to the front panel, and nada. Anyone got any ideas? mark

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Not new: I can remember seeing DEC engineers cleaning up the contacts on memory boards for a VAX 11/782 with a pencil eraser c.1985. It's still a pretty standard first fix to reseat a card or connector. On 18/01/16 15:47, Matt Garman wrote: > That's strange, I expected the SMART test to show some issues. > Personally, I'm still

Hello all, As some of you might remember, there is a Sun Fire X4500 (Thumper) server that I was asked to help upgrade to modern disks. It is still in a testing phase, and the one UltraStar 3Tb currently available to the server''s owners is humming in the server, with one small partition on its tail which replaced a dead 250Gb disk earlier in to pool. The OS is still SXCE snv_117 so

Hi all, we're trying to install CentOS 5.1 on a Sun Ultra 40. This is an AMD-powered machine and we're using the x86_64 version of CentOS 5.1. The machine is using the NVidia CK804 chipset and has SATA disks. It also has 16GB's of memory which prompted us to upgrade the BIOS on the machine from 1.1 to 1.6 per this (we also have the two quadro cards):

I will get back to the mailing list.?? But to answer your questions, yes the IP addresses and interface names are as expected (as before) with the new MAC/HW addresses.? I have someone else looking into it because when we plugged in the cable the light on the card did not light up.?? when we connect the pair server to another separate server it did.? Once the server is back up I will try these

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I suspect that the gold layer on edge connectors 30-odd years ago was a lot thicker than on modern cards. We are talking contacts on 0.1" spacing not some modern 1/10 of a knat's whisker. (Off topic) I also remember seeing engineers determine which memory chip was at fault and replacing the chip using a soldering iron. Try that on a DIMM!

I've used ipmitool any number of times, but never for more than getting info, or setting the server name on a Dell LCD screen. However, I had a server screaming about intruder alert, intruder alert, er, "Chassis intrusion detected", and I thought there might be a way to shut it up (this after pulling the server and reseating the lid). A quick google found, on the first page, an 8

Dne 17.9.2019 v 15:25 Mauricio Tavares napsal(a): > On Tue, Sep 17, 2019 at 9:11 AM Miroslav Geisselreiter <mg at intar.cz> wrote: >> Dne 17.9.2019 v 14:02 Mauricio Tavares napsal(a): >>> On Tue, Sep 17, 2019 at 7:06 AM Miroslav Geisselreiter <mg at intar.cz> wrote: >>>> I have brand new PC with this components: >>>> CPU Intel? Pentium G5400,

I keep getting a red alarm when trying to setup asterisk to use my TE420B EC. I only have a blank context setup in my extensions.conf as I haven't started to config that until I can clear this red alarm. I don't have physical access to the server, so I can't go reseat the modules/card/ethernet cable, though I have hands on location that have done this a couple times

Hi folks, I inherited a very old computer (I guess about 8 years old) which I'd like to use for some training on CentOS. I downloaded images for CentOS 6.4 i386 (DVD 1 and 2) and burned them onto discs. After inserting DVD 1 into drive and booting, on the "Welcome to CentOS 6.4!" screen I select "Install or upgrade an existing system". I then skip the media test and

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On 19/01/16 12:34, J Martin Rushton wrote: > Not new: I can remember seeing DEC engineers cleaning up the > contacts on memory boards for a VAX 11/782 with a pencil eraser > c.1985. It's still a pretty standard first fix to reseat a card or > connector. I used to do that as well. The contacts would come out nice and shiny when you

...t; wondering if it's in wake-on-lan; I've tried connecting to it via its > management port, and *zip*. > > I'm not going to do, as several folks' posts that I googled (been at that > for hours), cut the cable and solder in an on/off switch. I have taken the > lid uff, reseated the PSUs, and the cable connecting to the front panel, > and nada. > > Anyone got any ideas? > > mark > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > https://lists.centos.org/mailman/listinfo/centos

Hi Everyone, I found these in my log files. I am running the latest version of gs, as distributed by CentOS Oct 11 18:03:27 charlie kernel: gs[9960]: segfault at 0000000000000000 rip 0000003f0cd2063e rsp 0000007fbfffe090 error 6 Oct 12 14:40:58 charlie sshd(pam_unix)[12919]: session opened for user root by root(uid=0) Oct 13 15:16:11 charlie kernel: gs[16302]: segfault at 0000000000000000 rip

I have two X100P cards that were working just fine for months. When I run modprobe wcfxo today I got the following error: ZT_CHANCONFIG failed on channel 2: No such device or address (6) /lib/modules/2.4.19/misc/wcfxo.o: post-install wcfxo failed /lib/modules/2.4.19/misc/wcfxo.o: insmod wcfxo failed The output of dmesg said that wcfxo:Out of space to write register 06 with e0. What?s

I moved my TDM400B cards (first two cards are 40's, third is a 31, last is an 04) from one computer to another, copied all the config files, and now the LED on the line 11 - third line of the third card doesn't go on (it used to on the previous computer). I can get by telling * not to use this line for now but does anyone have any suggestions for getting it to work? Unseat and

thanks! www.cacti.net - Open source application for handling SNMP manageable devices. There is already a FatPipe host/device template and graph template that someone has built! I haven't loaded it as yet-- note his comments about his RRA being included in his templates. http://forums.cacti.net/about10840.html&highlight=fatpipe Your Asterisk people should consider the mailing list:

Greetings list, Wondering if some kind soul can help me with an issue with chan_sip segfaulting as soon as it loads... Basically, if sip.conf contains any peers with "host=dynamic" in them, asterisk won't start. Doing -vvvdddc yields the following: [chan_sip.so] => (Session Initiation Protocol (SIP)) == Parsing '/etc/asterisk/sip.conf': Found Segmentation fault As

I have a problem with a Sangoma card. It worked until yesterday. Now I keep getting this error: Jul 29 17:45:17 pbxacura kernel: wanpipe1: Enable E1 CAS signalling mode! Jul 29 17:45:17 pbxacura kernel: wanpipe1:w1g1: Rx Error: No 'DeviceSelect' from target: pci fatal error! (0x000FA000) Jul 29 17:45:48 pbxacura last message repeated 30946 times It is using Wanpipe 3.5.6 and Zaptel