Stefan-Michael Guenther
2010-Jan-25 15:20 UTC
[asterisk-users] Problem with Digium card, not transfering outgoing calls
Hi, I'm experiencing some strange problems with out Digium card. First the details abount hardware and software: Digium, Inc. Wildcard B410 quad-BRI card (rev 01) Asterisk 1.6.0.20 dahdi-linux-complete-2.2.1-rc2+2.2.1-rc2 libpri-1.4.10.2.tar.gz The problem now is that there are a number of clients that I call and suddenly the connection drops. Just a few seconds later the clients calls me, and tells me that he has accepted the calls but didn't hear anything. The CLI output for one of the calls is: Using SIP RTP CoS mark 5 -- Executing [01777622XXX at local:1] Set("SIP/sguenther-00000016", "CALLERID(num)=8304498") in new stack -- Executing [01777622XXX at local:2] Dial("SIP/sguenther-00000016", "DAHDI/g1/01777622XXX,60,tr") in new stack -- Requested transfer capability: 0x00 - SPEECH -- Called g1/01777622700 -- DAHDI/10-1 is proceeding passing it to SIP/sguenther-00000016 -- DAHDI/10-1 is making progress passing it to SIP/sguenther-00000016 -- DAHDI/10-1 is making progress passing it to SIP/sguenther-00000016 -- DAHDI/10-1 is ringing [2010-01-25 09:11:11] ERROR[20610]: chan_dahdi.c:10594 dahdi_pri_error: XXX Message longer than it should be?? XXX -- Channel 0/1, span 4 got hangup request, cause 16 -- Channel 0/1, span 4 received AOC-E charging 5 units -- Hungup 'DAHDI/10-1' -- No one is available to answer at this time (1:0/0/0) -- Executing [01777622XXXlocal:3] Hangup("SIP/sguenther-00000016", "") in new stack I have found a number of postings about "XXX Message longer than it should be?? XXX" but I guess these problems have been fixed in the current versions. Again: It is no problem to accept calls and the majority of outgoing calls are no problem. Thanks for any suggestions or hints, Stefan -- ******************************************** in-put GbR - Das Linux-Systemhaus Stefan-Michael Guenther Geschaeftsfuehrer Moltkestrasse 49 D-76133 Karlsruhe Tel./Fax : +49 (0)721 / 83044 - 98/93 http://www.in-put.de ******************************************** Schulungen Installationen Beratung Support Voice-over-IP-Loesungen ********************************************
Apparently Analagous Threads
- dahdi_monitor doesn't show data on RX & TX: broken card or cable?
- Soundcard necessary on an asterisk server to get output of playback()?? -> Next step
- Question about queues and the definition and agents
- Problem forwarding a call with an AGI script
- Zap / dahdi errors